> On 12. Jul 2020, at 21:05, Jaromir Dolecek <[email protected]> wrote: > > Module Name: src > Committed By: jdolecek > Date: Sun Jul 12 19:05:32 UTC 2020 > > Modified Files: > src/sys/dev/pci: if_bnx.c if_bnxvar.h > > Log Message: > enable MSI/MSI-X if supported by adapter > > tested MSI-X with Broadcom NetXtreme II BCM5709 1000Base-T > > > To generate a diff of this commit: > cvs rdiff -u -r1.95 -r1.96 src/sys/dev/pci/if_bnx.c > cvs rdiff -u -r1.12 -r1.13 src/sys/dev/pci/if_bnxvar.h > > Please note that diffs are not public domain; they are subject to the > copyright notices on the relevant files.
With this change my Dell PowerEdge 2850 spits watchdog resets:
[ 68.1828359] bnx0: Watchdog timeout -- resetting!
[ 88.6042909] bnx0: Watchdog timeout -- resetting!
[ 119.0265230] bnx0: Watchdog timeout -- resetting!
[ 145.4484562] bnx0: Watchdog timeout -- resetting!
Dmesg before is:
[ 1.017306] pci4 at ppb3 bus 7
[ 1.017306] pci4: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.017306] bnx0 at pci4 dev 0 function 0: Broadcom NetXtreme II BCM5708
1000Base-T
[ 1.017306] bnx0: Ethernet address 00:24:e8:67:4b:db
[ 1.017306] bnx0: ASIC BCM5708 B2 (0x57081020)
[ 1.017306] bnx0: PCI-X 64bit 133MHz
[ 1.017306] bnx0: B/C (4.6.0); Bufs (RX:2;TX:2); Flags (MFW); MFW (ipms
1.6.0)
[ 1.017306] bnx0: Coal (RX:6,6,18,18; TX:20,20,80,80)
[ 1.017306] brgphy0 at bnx0 phy 1: BCM5708C 1000BASE-T media interface,
rev. 6
[ 1.017306] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseT, 1000baseT-FDX, auto
[ 1.017306] bnx0: interrupting at ioapic0 pin 16
while dmesg after is:
[ 1.017262] pci4 at ppb3 bus 7
[ 1.017262] pci4: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.017262] bnx0 at pci4 dev 0 function 0: Broadcom NetXtreme II BCM5708
1000Base-T
[ 1.017262] bnx0: Ethernet address 00:24:e8:67:4b:db
[ 1.017262] bnx0: ASIC BCM5708 B2 (0x57081020)
[ 1.017262] bnx0: PCI-X 64bit 133MHz
[ 1.017262] bnx0: B/C (4.6.0); Bufs (RX:2;TX:2); Flags (MFW); MFW (ipms
1.6.0)
[ 1.017262] bnx0: Coal (RX:6,6,18,18; TX:20,20,80,80)
[ 1.017262] brgphy0 at bnx0 phy 1: BCM5708C 1000BASE-T media interface,
rev. 6
[ 1.017262] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseT, 1000baseT-FDX, auto
[ 1.017262] bnx0: interrupting at msi0 vec 0
Pcictl dump gives (in the MSI-X case):
PCI Message Signaled Interrupt
Message Control register: 0x0081
MSI Enabled: on
Multiple Message Capable: no (1 vector)
Multiple Message Enabled: off (1 vector)
64 Bit Address Capable: on
Per-Vector Masking Capable: off
Extended Message Data Capable: off
Extended Message Data Enable: off
Message Address (lower) register: 0xfee00000
Message Address (upper) register: 0x00000000
Message Data register: 0x0064
Any ideas how to fix this issue?
--
J. Hannken-Illjes - [email protected] - TU Braunschweig (Germany)
signature.asc
Description: Message signed with OpenPGP
