Module Name: src
Committed By: skrll
Date: Thu Jun 30 19:06:35 UTC 2022
Modified Files:
src/sys/dev/pci: if_bge.c
Log Message:
KNF some comments
To generate a diff of this commit:
cvs rdiff -u -r1.356 -r1.357 src/sys/dev/pci/if_bge.c
Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.
Modified files:
Index: src/sys/dev/pci/if_bge.c
diff -u src/sys/dev/pci/if_bge.c:1.356 src/sys/dev/pci/if_bge.c:1.357
--- src/sys/dev/pci/if_bge.c:1.356 Thu Jun 30 16:49:55 2022
+++ src/sys/dev/pci/if_bge.c Thu Jun 30 19:06:35 2022
@@ -1,4 +1,4 @@
-/* $NetBSD: if_bge.c,v 1.356 2022/06/30 16:49:55 skrll Exp $ */
+/* $NetBSD: if_bge.c,v 1.357 2022/06/30 19:06:35 skrll Exp $ */
/*
* Copyright (c) 2001 Wind River Systems
@@ -79,7 +79,7 @@
*/
#include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: if_bge.c,v 1.356 2022/06/30 16:49:55 skrll Exp $");
+__KERNEL_RCSID(0, "$NetBSD: if_bge.c,v 1.357 2022/06/30 19:06:35 skrll Exp $");
#include <sys/param.h>
@@ -1255,7 +1255,8 @@ bge_set_thresh(struct ifnet *ifp, int lv
struct bge_softc * const sc = ifp->if_softc;
int s;
- /* For now, just save the new Rx-intr thresholds and record
+ /*
+ * For now, just save the new Rx-intr thresholds and record
* that a threshold update is pending. Updating the hardware
* registers here (even at splhigh()) is observed to
* occasionally cause glitches where Rx-interrupts are not
@@ -4664,7 +4665,8 @@ bge_intr(void *xsc)
if (BGE_IS_5717_PLUS(sc))
intrmask = 0;
- /* It is possible for the interrupt to arrive before
+ /*
+ * It is possible for the interrupt to arrive before
* the status block is updated prior to the interrupt.
* Reading the PCI State register will confirm whether the
* interrupt is ours and will flush the status block.
@@ -4986,7 +4988,8 @@ bge_compact_dma_runt(struct mbuf *pkt)
if (mlen >= 8)
continue;
- /* If we get here, mbuf data is too small for DMA engine.
+ /*
+ * If we get here, mbuf data is too small for DMA engine.
* Try to fix by shuffling data to prev or next in chain.
* If that fails, do a compacting deep-copy of the whole chain.
*/
@@ -5011,7 +5014,8 @@ bge_compact_dma_runt(struct mbuf *pkt)
m->m_next->m_len -= shortfall;
m->m_next->m_data += shortfall;
} else if (m->m_next == NULL || 1) {
- /* Got a runt at the very end of the packet.
+ /*
+ * Got a runt at the very end of the packet.
* borrow data from the tail of the preceding mbuf and
* update its length in-place. (The original data is
* still valid, so we can do this even if prev is not
