Module Name: src
Committed By: wiz
Date: Wed Nov 23 23:49:23 UTC 2022
Modified Files:
src/share/man/man4: bmx280thp.4
Log Message:
New sentence, new line.
To generate a diff of this commit:
cvs rdiff -u -r1.3 -r1.4 src/share/man/man4/bmx280thp.4
Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.
Modified files:
Index: src/share/man/man4/bmx280thp.4
diff -u src/share/man/man4/bmx280thp.4:1.3 src/share/man/man4/bmx280thp.4:1.4
--- src/share/man/man4/bmx280thp.4:1.3 Wed Nov 23 23:45:30 2022
+++ src/share/man/man4/bmx280thp.4 Wed Nov 23 23:49:23 2022
@@ -1,4 +1,4 @@
-.\" $NetBSD: bmx280thp.4,v 1.3 2022/11/23 23:45:30 brad Exp $
+.\" $NetBSD: bmx280thp.4,v 1.4 2022/11/23 23:49:23 wiz Exp $
.\"
.\" Copyright (c) 2022 Brad Spencer <b...@anduin.eldar.org>
.\"
@@ -60,10 +60,10 @@ to reach >= 75% of the step response.
.It Li hw.bmx280thp0.waitfactor.h
These control the wait multiplication factor for a measurement cycle.
This factor is different for temperature, pressure and humidity and
-is based upon the values of osrs_t, osrs_p and osrs_h. If the chip
-does not return the correct measurements for a given over sampling
-then the wait factors can be adjusted to allow more time for the
-measurement to complete successfully.
+is based upon the values of osrs_t, osrs_p and osrs_h.
+If the chip does not return the correct measurements for a given
+over sampling then the wait factors can be adjusted to allow more
+time for the measurement to complete successfully.
.It Li hw.bmx280thp0.debug
.It Li hw.bmx280thp0.dump_calibration
If the driver is compiled with
