Module Name: src
Committed By: andvar
Date: Sat Dec 24 22:33:12 UTC 2022
Modified Files:
src/sys/arch/powerpc/ibm4xx/dev: gpiicreg.h
src/sys/netbt: l2cap_signal.c
Log Message:
s/Reqest/Request/ and adding apostrophe for don't and didn't in comments.
To generate a diff of this commit:
cvs rdiff -u -r1.2 -r1.3 src/sys/arch/powerpc/ibm4xx/dev/gpiicreg.h
cvs rdiff -u -r1.21 -r1.22 src/sys/netbt/l2cap_signal.c
Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.
Modified files:
Index: src/sys/arch/powerpc/ibm4xx/dev/gpiicreg.h
diff -u src/sys/arch/powerpc/ibm4xx/dev/gpiicreg.h:1.2 src/sys/arch/powerpc/ibm4xx/dev/gpiicreg.h:1.3
--- src/sys/arch/powerpc/ibm4xx/dev/gpiicreg.h:1.2 Sun Dec 11 12:18:42 2005
+++ src/sys/arch/powerpc/ibm4xx/dev/gpiicreg.h Sat Dec 24 22:33:12 2022
@@ -1,4 +1,4 @@
-/* $NetBSD: gpiicreg.h,v 1.2 2005/12/11 12:18:42 christos Exp $ */
+/* $NetBSD: gpiicreg.h,v 1.3 2022/12/24 22:33:12 andvar Exp $ */
/* Original Tag: iicreg.h,v 1.3 2003/09/23 14:56:08 shige Exp */
/*
@@ -118,7 +118,7 @@
/*
* Bit definitions for IIC_XFRCNT
*/
-#define IIC_INTRMSK_EIMTC (1u << 0) /* Enable IRQ on Reqested MT */
+#define IIC_INTRMSK_EIMTC (1u << 0) /* Enable IRQ on Requested MT */
#define IIC_INTRMSK_EITA (1u << 1) /* Enable IRQ on Trans Abort */
#define IIC_INTRMSK_EIIC (1u << 2) /* Enable IRQ on Incomp*/
#define IIC_INTRMSK_EIHE (1u << 3) /* */
Index: src/sys/netbt/l2cap_signal.c
diff -u src/sys/netbt/l2cap_signal.c:1.21 src/sys/netbt/l2cap_signal.c:1.22
--- src/sys/netbt/l2cap_signal.c:1.21 Sun Mar 13 17:50:55 2022
+++ src/sys/netbt/l2cap_signal.c Sat Dec 24 22:33:12 2022
@@ -1,4 +1,4 @@
-/* $NetBSD: l2cap_signal.c,v 1.21 2022/03/13 17:50:55 andvar Exp $ */
+/* $NetBSD: l2cap_signal.c,v 1.22 2022/12/24 22:33:12 andvar Exp $ */
/*-
* Copyright (c) 2005 Iain Hibbert.
@@ -31,7 +31,7 @@
*/
#include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: l2cap_signal.c,v 1.21 2022/03/13 17:50:55 andvar Exp $");
+__KERNEL_RCSID(0, "$NetBSD: l2cap_signal.c,v 1.22 2022/12/24 22:33:12 andvar Exp $");
#include <sys/param.h>
#include <sys/kernel.h>
@@ -164,7 +164,7 @@ finish:
}
/*
- * Process Received Command Reject. For now we dont try to recover gracefully
+ * Process Received Command Reject. For now we don't try to recover gracefully
* from this, it probably means that the link is garbled or the other end is
* insufficiently capable of handling normal traffic. (not *my* fault, no way!)
*/
@@ -198,14 +198,14 @@ l2cap_recv_command_rej(struct mbuf *m, s
switch (le16toh(cp.reason)) {
case L2CAP_REJ_NOT_UNDERSTOOD: /* data length = 0 octets */
/*
- * I dont know what to do, just move up the timeout
+ * I don't know what to do, just move up the timeout
*/
callout_schedule(&req->lr_rtx, 0);
break;
case L2CAP_REJ_MTU_EXCEEDED: /* data length = 2 octets */
/*
- * I didnt send any commands over L2CAP_MTU_MINIMUM size, but..
+ * I didn't send any commands over L2CAP_MTU_MINIMUM size, but..
*
* XXX maybe we should resend this, instead?
*/
@@ -218,7 +218,7 @@ l2cap_recv_command_rej(struct mbuf *m, s
case L2CAP_REJ_INVALID_CID: /* data length = 4 octets */
/*
- * Well, if they dont have such a channel then our channel is
+ * Well, if they don't have such a channel then our channel is
* most likely closed. Make it so.
*/
chan = req->lr_chan;
@@ -396,7 +396,7 @@ l2cap_recv_connect_rsp(struct mbuf *m, s
break;
case L2CAP_PENDING:
- /* XXX dont release request, should start eRTX timeout? */
+ /* XXX don't release request, should start eRTX timeout? */
(*chan->lc_proto->connecting)(chan->lc_upper);
break;
@@ -411,7 +411,7 @@ l2cap_recv_connect_rsp(struct mbuf *m, s
}
/*
- * Process Received Config Reqest.
+ * Process Received Config Request.
*/
static void
l2cap_recv_config_req(struct mbuf *m, struct hci_link *link)
@@ -522,7 +522,7 @@ l2cap_recv_config_req(struct mbuf *m, st
/*
* I think that this is informational only - he is
* informing us of the flush timeout he will be using.
- * I dont think this affects us in any significant way,
+ * I don't think this affects us in any significant way,
* so just ignore this value for now.
*/
break;
@@ -1121,7 +1121,7 @@ l2cap_send_connect_req(struct l2cap_chan
* Send Config Request
*
* For outgoing config request, we only put options in the packet if they
- * differ from the default and would have to be actioned. We dont support
+ * differ from the default and would have to be actioned. We don't support
* enough option types to make overflowing SigMTU an issue so it can all
* go in one packet.
*/
