Module Name: src
Committed By: andvar
Date: Sat Jul 20 20:53:53 UTC 2024
Modified Files:
src/sys/arch/amiga/dev: grf_rhreg.h
src/sys/dev/ic: fmvreg.h
Log Message:
s/hardwar-cursor/hardware-cursor/, s/hardrare/hardware/ in comments.
To generate a diff of this commit:
cvs rdiff -u -r1.17 -r1.18 src/sys/arch/amiga/dev/grf_rhreg.h
cvs rdiff -u -r1.1 -r1.2 src/sys/dev/ic/fmvreg.h
Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.
Modified files:
Index: src/sys/arch/amiga/dev/grf_rhreg.h
diff -u src/sys/arch/amiga/dev/grf_rhreg.h:1.17 src/sys/arch/amiga/dev/grf_rhreg.h:1.18
--- src/sys/arch/amiga/dev/grf_rhreg.h:1.17 Tue May 3 20:52:30 2022
+++ src/sys/arch/amiga/dev/grf_rhreg.h Sat Jul 20 20:53:53 2024
@@ -1,4 +1,4 @@
-/* $NetBSD: grf_rhreg.h,v 1.17 2022/05/03 20:52:30 andvar Exp $ */
+/* $NetBSD: grf_rhreg.h,v 1.18 2024/07/20 20:53:53 andvar Exp $ */
/*
* Copyright (c) 1994 Markus Wild
@@ -403,7 +403,7 @@ struct MonDef {
void RZ3SetHWCloc (unsigned short x, unsigned short y);
/*
- * sets the location of the hardwar-cursor sprite to x,y
+ * sets the location of the hardware-cursor sprite to x,y
* relative to the logical screen beginning.
* IMPORTANT: If you use RZ3SetHWCloc() to set the position
* of the hardware-cursor sprite, all necessary panning is
Index: src/sys/dev/ic/fmvreg.h
diff -u src/sys/dev/ic/fmvreg.h:1.1 src/sys/dev/ic/fmvreg.h:1.2
--- src/sys/dev/ic/fmvreg.h:1.1 Sat Oct 5 15:16:11 2002
+++ src/sys/dev/ic/fmvreg.h Sat Jul 20 20:53:53 2024
@@ -1,4 +1,4 @@
-/* $NetBSD: fmvreg.h,v 1.1 2002/10/05 15:16:11 tsutsui Exp $ */
+/* $NetBSD: fmvreg.h,v 1.2 2024/07/20 20:53:53 andvar Exp $ */
/*
* All Rights Reserved, Copyright (C) Fujitsu Limited 1995
@@ -35,7 +35,7 @@
*/
#define FE_FMV0 16 /* Hardware status. */
-#define FE_FMV1 17 /* Hardrare type? Always 0 */
+#define FE_FMV1 17 /* Hardware type? Always 0 */
#define FE_FMV2 18 /* Hardware configuration. */
#define FE_FMV3 19 /* Hardware enable. */
#define FE_FMV4 20 /* Station address #1 */
