Module Name: src
Committed By: uwe
Date: Tue Mar 11 17:46:12 UTC 2025
Modified Files:
src/share/man/man4: emcfan.4
Log Message:
emcfan(4): prettify the table, spell and typeset kHz correctly
To generate a diff of this commit:
cvs rdiff -u -r1.2 -r1.3 src/share/man/man4/emcfan.4
Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.
Modified files:
Index: src/share/man/man4/emcfan.4
diff -u src/share/man/man4/emcfan.4:1.2 src/share/man/man4/emcfan.4:1.3
--- src/share/man/man4/emcfan.4:1.2 Tue Mar 11 16:44:07 2025
+++ src/share/man/man4/emcfan.4 Tue Mar 11 17:46:12 2025
@@ -1,4 +1,4 @@
-.\" $NetBSD: emcfan.4,v 1.2 2025/03/11 16:44:07 uwe Exp $
+.\" $NetBSD: emcfan.4,v 1.3 2025/03/11 17:46:12 uwe Exp $
.\"
.\" Copyright (c) 2025 Brad Spencer <[email protected]>
.\"
@@ -64,30 +64,34 @@ The EMC2103-2, EMC2103-4, EMC2104 and EM
For the EMC2103-2 and EMC2103-4, these pins are only gpio and are not
shared with any other function.
For the EMC2104 and EMC2106, the following is how
-the pins maps to the altN flags in the
+the pins maps to the
+.Li alt Ns Ar N
+flags in the
.Xr gpio 4
framework.
+.Bd -unfilled -offset indent
.TS
box tab(:);
-l | l | l
+ci | ci | ci
= | = | =
-l | l | l
+l | l | c
- | - | -
-l | l | l
+l | l | c
- | - | -
-l | l | l
+l | l | c
- | - | -
l | l | l
- | - | -
l | l | l.
Pin:ALT0:ALT1
-GPIO1:CLK_IN: -
-GPIO2:TACH2: -
-GPIO3:PWM2: -
+GPIO1:CLK_IN:\-
+GPIO2:TACH2:\-
+GPIO3:PWM2:\-
GPIO4:OVERT2#:PWM3
GPIO5:OVERT3#:PWM4
.TE
-.Pp
+.Ed
+\& \" force vertical space
.Sh SYSCTL VARIABLES
The following
.Xr sysctl 8
@@ -109,12 +113,12 @@ The number of edges is set with the
command.
.It Li hw.emcfan0.ftach
Many of the chips in the two famlies have a pin that can be used to
-drive an alternative 32.767khz clock for the tachometers.
+drive an alternative 32.767\~kHz clock for the tachometers.
The EMC2103-1, EMC2103-2 and EMC2103-4 does not have this alternative
clock pin, and while it is likely that the chip is running at the
-default 32.000khz, it might not be.
+default 32.000\~kHz, it might not be.
This variable lets one set an alternative clock.
-The units for this node are in hz.
+The units for this node are in Hz.
.It Li hw.emcfan0.vin4_temp_zone
The EMC2104 and EMC2106 have a special temperature sensor pin called VIN4, if this sensor is wired up,
then this variable can be set to 1 and meaningful values will appear in the
