Module Name: src
Committed By: msaitoh
Date: Wed Jan 16 07:30:35 UTC 2019
Modified Files:
src/sys/dev/mii: mii.h
Log Message:
Add MII_GTCR(== 0x09 == MII_100T2CR) and MII_GTSR(== 0x0a == MII_100T2SR).
100T2 is little hard to imagine the meaning for gigabit Ethernet.
To generate a diff of this commit:
cvs rdiff -u -r1.23 -r1.24 src/sys/dev/mii/mii.h
Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.
Modified files:
Index: src/sys/dev/mii/mii.h
diff -u src/sys/dev/mii/mii.h:1.23 src/sys/dev/mii/mii.h:1.24
--- src/sys/dev/mii/mii.h:1.23 Mon Jun 18 09:11:03 2018
+++ src/sys/dev/mii/mii.h Wed Jan 16 07:30:35 2019
@@ -1,4 +1,4 @@
-/* $NetBSD: mii.h,v 1.23 2018/06/18 09:11:03 msaitoh Exp $ */
+/* $NetBSD: mii.h,v 1.24 2019/01/16 07:30:35 msaitoh Exp $ */
/*
* Copyright (c) 1997 Manuel Bouyer. All rights reserved.
@@ -217,8 +217,11 @@
#define ANLPRNP_TOGGLE 0x0800 /* Toggle */
#define ANLPRNP_MSGUNF_MASK 0x07ff /* Message(Anx28C)/Unformatted Code Field */
- /* This is also the 1000baseT control register */
-#define MII_100T2CR 0x09 /* 100base-T2 control register */
+#define MII_GTCR 0x09 /*
+ * Master-Slave control register for
+ * 100BASE-T2 and 1000BASE-T.
+ */
+#define MII_100T2CR MII_GTCR /* alias */
#define GTCR_TEST_MASK 0xe000 /* see 802.3ab ss. 40.6.1.1.2 */
#define GTCR_MAN_MS 0x1000 /* enable manual master/slave control */
#define GTCR_ADV_MS 0x0800 /* 1 = adv. master, 0 = adv. slave */
@@ -226,8 +229,11 @@
#define GTCR_ADV_1000TFDX 0x0200 /* adv. 1000baseT FDX */
#define GTCR_ADV_1000THDX 0x0100 /* adv. 1000baseT HDX */
- /* This is also the 1000baseT status register */
-#define MII_100T2SR 0x0a /* 100base-T2 status register */
+#define MII_GTSR 0x0a /*
+ * Master-Slave status register for
+ * 100BASE-T2 and 1000BASE-T.
+ */
+#define MII_100T2SR MII_GTSR /* alias */
#define GTSR_MAN_MS_FLT 0x8000 /* master/slave config fault */
#define GTSR_MS_RES 0x4000 /* result: 1 = master, 0 = slave */
#define GTSR_LRS 0x2000 /* local rx status, 1 = ok */
