Module Name: src
Committed By: nisimura
Date: Thu Oct 8 21:00:25 UTC 2020
Modified Files:
src/sys/dev/ic: dm9000reg.h
Log Message:
add DM9000A register definitions
To generate a diff of this commit:
cvs rdiff -u -r1.5 -r1.6 src/sys/dev/ic/dm9000reg.h
Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.
Modified files:
Index: src/sys/dev/ic/dm9000reg.h
diff -u src/sys/dev/ic/dm9000reg.h:1.5 src/sys/dev/ic/dm9000reg.h:1.6
--- src/sys/dev/ic/dm9000reg.h:1.5 Thu Oct 8 11:29:04 2020
+++ src/sys/dev/ic/dm9000reg.h Thu Oct 8 21:00:25 2020
@@ -1,4 +1,4 @@
-/* $NetBSD: dm9000reg.h,v 1.5 2020/10/08 11:29:04 nisimura Exp $ */
+/* $NetBSD: dm9000reg.h,v 1.6 2020/10/08 21:00:25 nisimura Exp $ */
/*
* Copyright (c) 2009 Paul Fleischer
@@ -167,17 +167,29 @@
#define DM9000_PID1 0x2B /* product ID 15:8 */
#define DM9000_CHIPR 0x2C /* chip revision */
-#define DM9000_SMCR 0x2F /* "serial mode" control */
+#define DM9000_TCR2 0x2D /* Tx control 2 */
+#define DM9000_OTCR 0x2E /* operation test control */
+#define DM9000_SMCR 0x2F /* special mode control */
#define DM9000_FB0 (1<<0) /* force shortest back-off time */
#define DM9000_FB1 (1<<1) /* force longeset back-off time */
#define DM9000_FLC (1<<2) /* force late collsion */
#define DM9000_SM_EN (1<<7) /* serial mode enable */
-#define DM9000_MRCMDX 0xF0 /* "no increment" read byte */
-#define DM9000_MRCMD 0xF2 /* "auto increment" read byte */
+#define DM9000_ETXCSR 0x30 /* early xmit control and status */
+#define DM9000_TCSCR 0x31 /* xmit checksum control */
+#define DM9000_RCSCSR 0x32 /* recv checksum control and status */
+#define DM9000_MPAR 0x33 /* MII PHY address */
+#define DM9000_LEDCR 0x34 /* LED pin control */
+#define DM9000_BUSCR 0x38 /* processor bus control */
+#define DM9000_INTCR 0x39 /* INT pin control */
+#define DM9000_SCCR 0x50 /* system clock turn on control */
+#define DM9000_RSCCR 0x51 /* resume system clock control */
+#define DM9000_MRCMDX 0xF0 /* "no increment" pre-fetch read */
+#define DM9000_MRCMDX1 0xF1 /* "no increment" read */
+#define DM9000_MRCMD 0xF2 /* "auto increment" read */
#define DM9000_MRRL 0xF4 /* memory read address 7:0 */
#define DM9000_MRRH 0xF5 /* memory read address 15:8 */
-#define DM9000_MWCMDX 0xF6 /* "no increment" write byte */
-#define DM9000_MWCMD 0xF8 /* "auto increment" write byte */
+#define DM9000_MWCMDX 0xF6 /* "no increment" write */
+#define DM9000_MWCMD 0xF8 /* "auto increment" write */
#define DM9000_MWRL 0xFA /* memory write address 7:0 */
#define DM9000_MWRH 0xFB /* memory write address 15:8 */
#define DM9000_TXPLL 0xFC /* frame len 7:0 to transmit */
