Module Name: src
Committed By: njoly
Date: Tue May 11 09:08:13 UTC 2010
Modified Files:
src/sys/dev/pci: if_bge.c
Log Message:
Fix some typos in comments.
To generate a diff of this commit:
cvs rdiff -u -r1.183 -r1.184 src/sys/dev/pci/if_bge.c
Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.
Modified files:
Index: src/sys/dev/pci/if_bge.c
diff -u src/sys/dev/pci/if_bge.c:1.183 src/sys/dev/pci/if_bge.c:1.184
--- src/sys/dev/pci/if_bge.c:1.183 Sun Apr 25 11:24:46 2010
+++ src/sys/dev/pci/if_bge.c Tue May 11 09:08:12 2010
@@ -1,4 +1,4 @@
-/* $NetBSD: if_bge.c,v 1.183 2010/04/25 11:24:46 ad Exp $ */
+/* $NetBSD: if_bge.c,v 1.184 2010/05/11 09:08:12 njoly Exp $ */
/*
* Copyright (c) 2001 Wind River Systems
@@ -79,7 +79,7 @@
*/
#include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: if_bge.c,v 1.183 2010/04/25 11:24:46 ad Exp $");
+__KERNEL_RCSID(0, "$NetBSD: if_bge.c,v 1.184 2010/05/11 09:08:12 njoly Exp $");
#include "vlan.h"
#include "rnd.h"
@@ -150,7 +150,7 @@
* such that moving from one pair to the succeeding pair was observed
* to roughly halve interrupt rate under sustained input packet load.
* The values were empirically chosen to avoid overflowing internal
- * limits on the bcm5700: inreasing rx_ticks much beyond 600
+ * limits on the bcm5700: increasing rx_ticks much beyond 600
* results in internal wrapping and higher interrupt rates.
* The limit of 46 frames was chosen to match NFS workloads.
*
@@ -1300,7 +1300,7 @@
/*
- * Intialize a standard receive ring descriptor.
+ * Initialize a standard receive ring descriptor.
*/
static int
bge_newbuf_std(struct bge_softc *sc, int i, struct mbuf *m,
@@ -2449,7 +2449,7 @@
/*
* Entering ACPI power states D1-D3 is achieved by wiggling
* GMII gpio pins. Example code assumes all hardware vendors
- * followed Broadom's sample pcb layout. Until we verify that
+ * followed Broadcom's sample pcb layout. Until we verify that
* for all supported OEM cards, states D1-D3 are unsupported.
*/
aprint_error_dev(sc->bge_dev,
@@ -3204,7 +3204,7 @@
marbmode = CSR_READ_4(sc, BGE_MARB_MODE);
CSR_WRITE_4(sc, BGE_MARB_MODE, BGE_MARBMODE_ENABLE | marbmode);
- /* Step 17: Poll until the firmware iitializeation is complete */
+ /* Step 17: Poll until the firmware initialization is complete */
bge_poll_fw(sc);
/* XXX 5721, 5751 and 5752 */
@@ -3301,7 +3301,7 @@
* on the receive return list.
*
* Note: we have to be able to handle two possibilities here:
- * 1) the frame is from the jumbo recieve ring
+ * 1) the frame is from the jumbo receive ring
* 2) the frame is from the standard receive ring
*/
