Module Name: src
Committed By: matt
Date: Sat Sep 1 00:22:13 UTC 2012
Added Files:
src/sys/arch/evbarm/conf: PANDABOARD
Log Message:
Initial config for PANDABOARD (doesn't quite work yet).
To generate a diff of this commit:
cvs rdiff -u -r0 -r1.1 src/sys/arch/evbarm/conf/PANDABOARD
Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.
Added files:
Index: src/sys/arch/evbarm/conf/PANDABOARD
diff -u /dev/null src/sys/arch/evbarm/conf/PANDABOARD:1.1
--- /dev/null Sat Sep 1 00:22:13 2012
+++ src/sys/arch/evbarm/conf/PANDABOARD Sat Sep 1 00:22:13 2012
@@ -0,0 +1,295 @@
+#
+# $NetBSD: PANDABOARD,v 1.1 2012/09/01 00:22:13 matt Exp $
+#
+# PANDABOARD -- TI OMAP 4430 Eval Board Kernel
+#
+
+include "arch/evbarm/conf/std.beagle"
+
+# estimated number of users
+
+maxusers 32
+
+# Standard system options
+
+options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
+#options NTP # NTP phase/frequency locked loop
+
+# CPU options
+
+options CPU_CORTEXA9
+options OMAP_4430
+options PMAPCOUNTERS
+
+# Architecture options
+
+# File systems
+
+file-system FFS # UFS
+#file-system LFS # log-structured file system
+file-system MFS # memory file system
+file-system NFS # Network file system
+#file-system ADOSFS # AmigaDOS-compatible file system
+#file-system EXT2FS # second extended file system (linux)
+#file-system CD9660 # ISO 9660 + Rock Ridge file system
+file-system MSDOSFS # MS-DOS file system
+#file-system FDESC # /dev/fd
+#file-system KERNFS # /kern
+#file-system NULLFS # loopback file system
+#file-system PROCFS # /proc
+#file-system UMAPFS # NULLFS + uid and gid remapping
+#file-system UNION # union file system
+file-system TMPFS # memory file system
+file-system PTYFS # /dev/pts/N support
+
+# File system options
+#options QUOTA # legacy UFS quotas
+#options QUOTA2 # new, in-filesystem UFS quotas
+#options FFS_EI # FFS Endian Independant support
+#options NFSSERVER
+options WAPBL # File system journaling support - Experimental
+#options FFS_NO_SNAPSHOT # No FFS snapshot support
+
+# Networking options
+
+#options GATEWAY # packet forwarding
+options INET # IP + ICMP + TCP + UDP
+options INET6 # IPV6
+#options IPSEC # IP security
+#options IPSEC_ESP # IP security (encryption part; define w/ IPSEC)
+#options IPSEC_NAT_T # IPsec NAT traversal (NAT-T)
+#options IPSEC_DEBUG # debug for IP security
+#options MROUTING # IP multicast routing
+#options PIM # Protocol Independent Multicast
+#options NS # XNS
+#options NSIP # XNS tunneling over IP
+#options ISO,TPIP # OSI
+#options EON # OSI tunneling over IP
+#options CCITT,LLC,HDLC # X.25
+#options NETATALK # AppleTalk networking
+#options PFIL_HOOKS # pfil(9) packet filter hooks
+#options PPP_BSDCOMP # BSD-Compress compression support for PPP
+#options PPP_DEFLATE # Deflate compression support for PPP
+#options PPP_FILTER # Active filter support for PPP (requires bpf)
+#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
+
+options NFS_BOOT_BOOTP
+options NFS_BOOT_DHCP
+#options NFS_BOOT_BOOTSTATIC
+#options NFS_BOOTSTATIC_MYIP="\"192.168.1.4\""
+#options NFS_BOOTSTATIC_GWIP="\"192.168.1.1\""
+#options NFS_BOOTSTATIC_MASK="\"255.255.255.0\""
+#options NFS_BOOTSTATIC_SERVADDR="\"192.168.1.1\""
+#options NFS_BOOTSTATIC_SERVER="\"192.168.1.1:/nfs/sdp2430\""
+
+options NFS_BOOT_RWSIZE=1024
+
+# Compatibility options
+
+#options COMPAT_43 # 4.3BSD compatibility.
+options COMPAT_50 # NetBSD 5.0 compatibility.
+options COMPAT_40 # NetBSD 4.0 compatibility.
+options COMPAT_30 # NetBSD 3.0 compatibility.
+#options COMPAT_20 # NetBSD 2.0 compatibility.
+#options COMPAT_16 # NetBSD 1.6 compatibility.
+#options COMPAT_15 # NetBSD 1.5 compatibility.
+#options COMPAT_14 # NetBSD 1.4 compatibility.
+#options COMPAT_13 # NetBSD 1.3 compatibility.
+#options COMPAT_12 # NetBSD 1.2 compatibility.
+#options COMPAT_11 # NetBSD 1.1 compatibility.
+#options COMPAT_10 # NetBSD 1.0 compatibility.
+#options COMPAT_09 # NetBSD 0.9 compatibility.
+#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
+#options COMPAT_BSDPTY # /dev/[pt]ty?? ptys.
+
+# Shared memory options
+
+options SYSVMSG # System V-like message queues
+options SYSVSEM # System V-like semaphores
+#options SEMMNI=10 # number of semaphore identifiers
+#options SEMMNS=60 # number of semaphores in system
+#options SEMUME=10 # max number of undo entries per process
+#options SEMMNU=30 # number of undo structures in system
+options SYSVSHM # System V-like memory sharing
+
+# Device options
+
+#options MEMORY_DISK_HOOKS # boottime setup of ramdisk
+#options MEMORY_DISK_ROOT_SIZE=8192 # Size in blocks
+#options MEMORY_DISK_DYNAMIC
+#options MINIROOTSIZE=1000 # Size in blocks
+#options MEMORY_DISK_IS_ROOT # use memory disk as root
+
+# Miscellaneous kernel options
+options KTRACE # system call tracing, a la ktrace(1)
+#options KMEMSTATS # kernel memory statistics
+#options SCSIVERBOSE # Verbose SCSI errors
+#options MIIVERBOSE # Verbose MII autoconfuration messages
+#options DDB_KEYCODE=0x40
+#options USERCONF # userconf(4) support
+#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
+
+# Development and Debugging options
+
+#options PERFCTRS # performance counters
+options DIAGNOSTIC # internally consistency checks
+#options DEBUG
+#options PMAP_DEBUG # Enable pmap_debug_level code
+#options IPKDB # remote kernel debugging
+options VERBOSE_INIT_ARM # verbose bootstraping messages
+options DDB # in-kernel debugger
+options DDB_ONPANIC=1
+options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
+#options KGDB
+makeoptions DEBUG="-g" # compile full symbol table
+options SYMTAB_SPACE=530000
+
+## USB Debugging options
+options USB_DEBUG
+options EHCI_DEBUG
+options OHCI_DEBUG
+options UHUB_DEBUG
+
+
+# Valid options for BOOT_ARGS:
+# single Boot to single user only
+# kdb Give control to kernel debugger
+# ask Ask for file name to reboot from
+# pmapdebug=<n> If PMAP_DEBUG, set pmap_debug_level to <n>
+# memorydisk=<n> Set memorydisk size to <n> KB
+# quiet Show aprint_naive output
+# verbose Show aprint_normal and aprint_verbose output
+options BOOT_ARGS="\"\""
+
+config netbsd root on ? type ?
+
+# The main bus device
+mainbus0 at root
+
+# The boot cpu
+cpu0 at mainbus?
+
+# A9 core devices
+armperiph0 at mainbus?
+armgic0 at armperiph? # Interrupt Controller
+a9tmr0 at armperiph? # Global Timer
+a9wdt0 at armperiph? # Watchdog
+
+# Specify the memory size in megabytes.
+options MEMSIZE=512
+
+# L3 Interconnect
+L3i0 at mainbus?
+
+# OBIO
+obio0 at mainbus? base 0x4a000000 size 0x1000000 # L4 CORE (CFG)
+obio1 at mainbus? base 0x4a300000 size 0x0040000 # L4 WAKEUP
+obio2 at mainbus? base 0x48000000 size 0x1000000 # L4 PERIPHERAL
+#obio3 at mainbus? base 0x49000000 size 0x1000000 # L4 ABE
+
+# General Purpose Memory Controller
+gpmc0 at mainbus? base 0x50000000
+
+omapgpio0 at obio1 addr 0x48310000 size 0x0400 intrbase 160 intr 61
+#omapgpio1 at obio2 addr 0x49050000 size 0x0400 intrbase 192 intr 62
+#omapgpio2 at obio2 addr 0x49052000 size 0x0400 intrbase 224 intr 63
+#omapgpio3 at obio2 addr 0x49054000 size 0x0400 intrbase 256 intr 64
+omapgpio4 at obio2 addr 0x49056000 size 0x0400 intrbase 288 intr 65
+#omapgpio5 at obio2 addr 0x49058000 size 0x0400 intrbase 320 intr 66
+
+gpio* at omapgpio?
+
+# # I2C Controller
+# omapi2c0 at tipb? addr 0xfffb3800 intr 68 mult 4
+# iic* at omapi2c?
+# # omap's own i2c address
+# options OMAP_I2C_ADDRESS=0xe
+# # i2c bus clock low and high times in ns
+# options I2C_LOW_TIME_nSEC=1500
+# options I2C_HIGH_TIME_nSEC=1000
+
+# On-board 16550 UARTs
+com0 at obio2 addr 0x48020000 intr 106 mult 4 # UART3 (console)
+#options CONSADDR=0x48020000, CONSPEED=38400
+options CONSADDR=0x48020000, CONSPEED=115200
+
+# Operating System Timer
+#omapmputmr0 at obio2 addr 0x48032000 intr 70 # GP Timer 2 L4PER
+# Statistics Timer
+#omapmputmr1 at obio2 addr 0x48034000 intr 71 # GP Timer 3 L4PER
+# Microtime Reference Timer
+#omapmputmr2 at obio2 addr 0x48036000 intr 72 # GP Timer 4 L4PER
+#options OMAP_MPU_TIMER_CLOCK_FREQ=12000000
+
+# Watchdog timers
+#omapwdt32k* at obio3 addr 0x49030000 size 2048 # WDT3
+#omapwdt32k* at obio1 addr 0x4830c000 size 2048 # WDT1
+#omapwdt32k* at obio1 addr 0x4a314000 size 2048 # WDT2
+
+# onboard video
+#omapfb* at obio0 addr 0x48050000 size 0x10000
+
+# make sure the console display is always wsdisplay0
+#wsdisplay0 at wsemuldisplaydev? console 1
+#wsdisplay* at wsemuldisplaydev?
+
+# various options for wscons - we try to look as much like a standard
+# sun console as possible
+#options WSEMUL_VT100 # sun terminal emulation
+#options WS_DEFAULT_FG=WSCOL_BLACK
+#options WS_DEFAULT_BG=WSCOL_LIGHT_WHITE
+#options WS_KERNEL_FG=WSCOL_GREEN
+#options WS_KERNEL_BG=WSCOL_LIGHT_WHITE
+#options WSDISPLAY_COMPAT_USL # VT handling
+#options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes
+#options WSDISPLAY_DEFAULTSCREENS=4
+#options FONT_QVSS8x15
+#options FONT_GALLANT12x22 # the console font
+
+#pseudo-device wsmux # mouse & keyboard multiplexor
+#pseudo-device wsfont
+
+# Power, Reset and Clock Management
+prcm* at obio1 addr 0x48306000 size 0x2000 # PRM Module
+
+# On-board USB
+#ehci* at obio0 addr 0x48064800 size 0x0400 intr 109
+#ohci* at obio0 addr 0x48064400 size 0x0400 intr 108
+#usb* at ohci?
+#usb* at ehci?
+#uhub* at usb?
+#uhub* at uhub? port ?
+#umass* at uhub? port ? configuration ? interface ?
+#wd* at umass?
+#uhidev* at uhub?
+#ukbd* at uhidev?
+#ums* at uhidev?
+#wskbd* at ukbd?
+#wsmouse* at ums?
+
+#axe* at uhub? port ? configuration ? interface ?
+
+# Hardware clocking and power management
+
+options HWCLOCK
+options HWCLOCK_MACHINE="<arch/arm/omap/hwclock_omap1.h>"
+options OMAP_CK_REF_SPEED=12000000
+
+# Pseudo-Devices
+
+# disk/mass storage pseudo-devices
+#pseudo-device md # memory disk device (ramdisk)
+#pseudo-device vnd # disk-like interface to files
+#pseudo-device fss # file system snapshot device
+pseudo-device drvctl # driver control
+
+# network pseudo-devices
+pseudo-device bpfilter # Berkeley packet filter
+pseudo-device loop # network loopback
+#pseudo-device kttcp # network loopback
+
+# miscellaneous pseudo-devices
+pseudo-device pty # pseudo-terminals
+#options RND_COM
+#pseudo-device clockctl # user control of clock subsystem
+pseudo-device ksyms # /dev/ksyms
