Module Name: src
Committed By: sborrill
Date: Mon Nov 9 12:38:41 UTC 2015
Modified Files:
src/doc [netbsd-5]: CHANGES-5.3
Log Message:
Ticket #1983
To generate a diff of this commit:
cvs rdiff -u -r1.1.2.127 -r1.1.2.128 src/doc/CHANGES-5.3
Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.
Modified files:
Index: src/doc/CHANGES-5.3
diff -u src/doc/CHANGES-5.3:1.1.2.127 src/doc/CHANGES-5.3:1.1.2.128
--- src/doc/CHANGES-5.3:1.1.2.127 Mon Nov 9 10:36:46 2015
+++ src/doc/CHANGES-5.3 Mon Nov 9 12:38:41 2015
@@ -1,4 +1,4 @@
-# $NetBSD: CHANGES-5.3,v 1.1.2.127 2015/11/09 10:36:46 sborrill Exp $
+# $NetBSD: CHANGES-5.3,v 1.1.2.128 2015/11/09 12:38:41 sborrill Exp $
A complete list of changes from the NetBSD 5.2 release to the NetBSD 5.3
release:
@@ -4101,3 +4101,131 @@ sys/dev/mii/miidevs_data.h regen
- Update comment.
[msaitoh, ticket #1982]
+sys/dev/pci/pcidevs 1.1079, 1.1134, 1.1148-1.1149, 1.1151
+sys/dev/pci/pcidevs.h regen
+sys/dev/pci/pcidevs_data.h regen
+sys/dev/pci/if_bge.c 1.183-1.185, 1.187, 1.189-1.193, 1.195-1.199, 1.202-1.226, 1.228-1.237, 1.240-1.264, 1.267-1.276, 1.278-1.280, 1.283-1.287 via patch
+sys/dev/pci/if_bgereg.h 1.57-1.74, 1.76-1.90 via patch
+sys/dev/pci/if_bgevar.h 1.6, 1.10-1.13, 1.15-1.17 via patch
+sys/dev/pci/if_bnx.c 1.32, 1.34-1.43, 1.48-1.49, 1.52
+sys/dev/pci/if_bnxreg.h 1.8, 1.11-1.14
+sys/dev/pci/if_bnxvar.h 1.1-1.3
+sys/dev/mii/brgphy.c 1.53-1.63, 1.65-69, 1.72-1.74 via patch
+sys/dev/mii/brgphyreg.h 1.5-1.8
+sys/dev/mii/miivar.h 1.61
+sys/dev/pci/pcireg.h patch
+
+ Sync bge(4) up to if_bge.c rev. 1.287. Sync brgphy(4) up to 1.74.
+ Fix some bugs on bnx(4). Details as follows:
+ Common:
+ - Add device IDs for Broadcom BCM57710, BCM57711(E), BCM57712(E) and
+ BCM57766 (pcidevs only).
+ - Fix BCM5709 PHY detection.
+ - Fix detection of BGEPHYF_FIBER_{MII|TBI}
+ - Add BCM5708S support in brgphy(4).
+ - Don't use the WIRESPEED function for fiber devices.
+ bge(4):
+ - Add some Fujitsu's device support from Michael Moll.
+ - Add BCM57762 support (PR#46961 from Ryo Onodera).
+ - Add Altima AC1003, APPLE BCM5701, Broadcom BCM5785F. BCM5785G,
+ BCM5787F, BCM5719, BCM5720, BCM57766, BCM57782 and BCM57786.
+ - Fix DMA setting for read/write on conventional PCI bus devices.
+ - Fix printing "discarding oversize frame (len=-4)" message and crash
+ by NULL pointer dereferencing.
+ - The BCM5785 is a PCIe chip but does not report PCIe capabilities.
+ Check for this chip explicitly and enable PCIe. Fixes
+ 'firmware handshake timeout'.
+ - Allow disabling interrupt mitigation.
+ - Workaround for BCM5906 silicon bug. When auto-negotiation results in
+ half-duplex operation, excess collision on the ethernet link may
+ cause internal chip delays that may result in subsequent valid
+ frames being dropped due to insufficient receive buffer resources.
+ (FreeBSD: r214219, r214251, r214292).
+ - Allow write DMA to request larger DMA burst size to get better
+ performance on BCM5785. (FreeBSD r213333: OpenBSD 1.294)
+ - Enable TX MAC state machine lockup fix for both BCM5755 or higher
+ and BCM5906. Publicly available data sheet just says it may happen
+ due to corrupted TxMbuf. (FreeBSD r214216)
+ - Follow Broadcom datasheet:
+ Delay 100 microseconds after enabling transmit MAC.
+ Delay 10 microseconds after enabling receive MAC. (FreeBSD r241220)
+ - Insert the completion barrier between register write and the
+ consecutive delay(). It will fix some device timeout problems we have
+ seen before.
+ - Add DELAY(40) after turning on write DMA state machine.
+ - Add some workarounds for 5717 A0 and 5776[56] to be stable.
+ - Check BGE_RXBDFLAG_IPV6 flag for 5717_PLUS case. Note that
+ {tcp,udp}6csum flag is currently not added in the capability.
+ - Add delay after clearing BGE_MACMODE_TBI_SEND_CFGS for the link
+ checking.
+ - Do not touch the jumbo replenish threshold register on chips that do
+ not have jumbo support.
+ - Wait for the bootcode to complete initialization for 5717 and newer
+ devices.
+ - 5718 and 57785 document say we should wait 100us in init.
+ - Fix a bug that chips which have BCM5906 ASIC touch GPIO wrongly.
+ - Fix the setting of Tx Random Backoff Register.
+ - Check the hardware config words and print them.
+ - Set BGE_MISC_CTL's byte/word swap options before using
+ bge_readmem_ind(). Fixes PR#47716.
+ - For BGE_IS_575X_PLUS() devices, don't set
+ BGE_RXLPSTATCONTROL_DACK_FIX bits because these bits are reserved.
+ - Document says 5717 and newer chips have no
+ BGE_PCISTATE_INTR_NOT_ACTIVE bit, so don't use the bit on those
+ chips. Same as OpenBSD.
+ - Fix a bug that the PHY address bits in MI_MODE register is wrongly
+ cleared. Set the PHY address correctly.
+ - Use BGE_SETBIT() instead of CSR_WRITE_4() for the BGE_MISC_LOCAL_CTL
+ register to not to modify some GPIO bits.
+ - Set DMA watermark depend on the PCI max payload size.
+ - Set BGE_JUMBO_CAPABLE correctly.
+ - Fix a link detect bug on non-autopoll systems.
+ - Change the TX ring size for 5717 series and 57764 series.
+ - Set maximum read byte count to 2048 for PCI-X BCM5703/5704 devices.
+ For PCI-X BCM5704, set maximum outstanding split transactions to 0.
+ - Add 40bit DMA bug workaround(BGEF_40BIT_BUG) from FreeBSD.
+ This workaround is for 5714/5715 controllers and is not actually a
+ MAC controller bug but an issue with the embedded PCIe to PCI-X
+ bridge in the device. This change uses bus_dmatag_subregion(),
+ so this workaround won't work on some archs which doesn't support
+ bus_dmatag_subregion().
+ - Add 2500SX support (not tested).
+ - Don't use the PHY Auto Poll Mode on many chips. This fixes a bug
+ that MII Fiber NIC drop packet about 50%. Tested on HP Moonshot.
+ - Add workaround for PR#48451. Some BCM5717-5720 based systems get NMI
+ on boot. This problem doesn't occur when we don't use prefetchable
+ memory in the APE area. Tested with HP MicroServer Gen8.
+ - In the BCM5703, the DMA read watermark should be set to less than
+ or equal to the maximum memory read byte count of the PCI-X command
+ register.
+ - Fix a bug that BGE_PHY_TEST_CTRL_REG isn't set correctly on some
+ PCIe devices.
+ - Use another firmware command in bge_asf_driver_up(). Same as Linux.
+ This change fixes a bug that watchdog timeout occurs every 25-30
+ minutes on HP ML110 G6 reported enami@ in PR#49657.
+ - Fix mbuf leak on failure.
+ - Remove PCI_PRODUCT_BROADCOM_BCM5724 and
+ PCI_PRODUCT_BROADCOM_BCM5750M. These devices have not released to
+ public.
+ - Add some workaround code for BGE_ASICREV_BCM5784 from Linux.
+ - Change some printf() to aprint_*().
+ - Fix typo in comments.
+ - Cleanup.
+ brgphy(4):
+ - Fix bit definition of BRGPHY_MRBE_MSG_PG5_NP_T2 from FreeBSD.
+ - Add BCM5481, BCM5709S, BCM5756, BCM5717C, BCM5720C, BCM5785,
+ BCM57765(PR#46961), BCM57780
+ - In brgphyattach(), set sc_isbge, sc_isbnx and sc_phyflags before
+ PHY_RESET() because brgphy_reset() refers those flags.
+ - Call brgpy specific autonego function in MII_TICK. Before this
+ commit, only MII_MEDIACHG calls brgphy_mii_phy_auto() and MII_TICK
+ calls MI mii_phy_auto(). That was not intended.
+ - Remove extra delay in brgphy_mii_phy_auto. Same as {Free,Open}BSD.
+ bnx(4):
+ - Add missing ifmedia_delete_instance() in bnx_detach().
+ - Fix a bug that BNX_NO_WOL_FLAG isn't correctly set on some chips.
+ Reported by Henning Petersen in PR#44151.
+ - Fix SERDES initialization.
+ - Get out of the interrupt handler early if !IFF_RUNNING.
+ [msaitoh, #1983]
+
