Module Name: src
Committed By: msaitoh
Date: Thu Dec 1 07:44:58 UTC 2016
Added Files:
src/sys/dev/pci/ixgbe: ixgbe_x550.c ixgbe_x550.h
Log Message:
Add forgotten ixgbe_x550.c and ixgbe_x550.h.
To generate a diff of this commit:
cvs rdiff -u -r0 -r1.1 src/sys/dev/pci/ixgbe/ixgbe_x550.c \
src/sys/dev/pci/ixgbe/ixgbe_x550.h
Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.
Added files:
Index: src/sys/dev/pci/ixgbe/ixgbe_x550.c
diff -u /dev/null src/sys/dev/pci/ixgbe/ixgbe_x550.c:1.1
--- /dev/null Thu Dec 1 07:44:58 2016
+++ src/sys/dev/pci/ixgbe/ixgbe_x550.c Thu Dec 1 07:44:58 2016
@@ -0,0 +1,3191 @@
+/******************************************************************************
+
+ Copyright (c) 2001-2015, Intel Corporation
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+
+******************************************************************************/
+/*$FreeBSD: head/sys/dev/ixgbe/ixgbe_x550.c 282289 2015-04-30 22:53:27Z erj $*/
+
+#include "ixgbe_x550.h"
+#include "ixgbe_x540.h"
+#include "ixgbe_type.h"
+#include "ixgbe_api.h"
+#include "ixgbe_common.h"
+#include "ixgbe_phy.h"
+
+static s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed);
+
+/**
+ * ixgbe_init_ops_X550 - Inits func ptrs and MAC type
+ * @hw: pointer to hardware structure
+ *
+ * Initialize the function pointers and assign the MAC type for X550.
+ * Does not touch the hardware.
+ **/
+s32 ixgbe_init_ops_X550(struct ixgbe_hw *hw)
+{
+ struct ixgbe_mac_info *mac = &hw->mac;
+ struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+ s32 ret_val;
+
+ DEBUGFUNC("ixgbe_init_ops_X550");
+
+ ret_val = ixgbe_init_ops_X540(hw);
+ mac->ops.dmac_config = ixgbe_dmac_config_X550;
+ mac->ops.dmac_config_tcs = ixgbe_dmac_config_tcs_X550;
+ mac->ops.dmac_update_tcs = ixgbe_dmac_update_tcs_X550;
+ mac->ops.setup_eee = ixgbe_setup_eee_X550;
+ mac->ops.set_source_address_pruning =
+ ixgbe_set_source_address_pruning_X550;
+ mac->ops.set_ethertype_anti_spoofing =
+ ixgbe_set_ethertype_anti_spoofing_X550;
+
+ mac->ops.get_rtrup2tc = ixgbe_dcb_get_rtrup2tc_generic;
+ eeprom->ops.init_params = ixgbe_init_eeprom_params_X550;
+ eeprom->ops.calc_checksum = ixgbe_calc_eeprom_checksum_X550;
+ eeprom->ops.read = ixgbe_read_ee_hostif_X550;
+ eeprom->ops.read_buffer = ixgbe_read_ee_hostif_buffer_X550;
+ eeprom->ops.write = ixgbe_write_ee_hostif_X550;
+ eeprom->ops.write_buffer = ixgbe_write_ee_hostif_buffer_X550;
+ eeprom->ops.update_checksum = ixgbe_update_eeprom_checksum_X550;
+ eeprom->ops.validate_checksum = ixgbe_validate_eeprom_checksum_X550;
+
+ mac->ops.disable_mdd = ixgbe_disable_mdd_X550;
+ mac->ops.enable_mdd = ixgbe_enable_mdd_X550;
+ mac->ops.mdd_event = ixgbe_mdd_event_X550;
+ mac->ops.restore_mdd_vf = ixgbe_restore_mdd_vf_X550;
+ mac->ops.disable_rx = ixgbe_disable_rx_x550;
+ if (hw->device_id == IXGBE_DEV_ID_X550EM_X_10G_T) {
+ hw->mac.ops.led_on = ixgbe_led_on_t_X550em;
+ hw->mac.ops.led_off = ixgbe_led_off_t_X550em;
+ }
+ return ret_val;
+}
+
+/**
+ * ixgbe_read_cs4227 - Read CS4227 register
+ * @hw: pointer to hardware structure
+ * @reg: register number to write
+ * @value: pointer to receive value read
+ *
+ * Returns status code
+ **/
+static s32 ixgbe_read_cs4227(struct ixgbe_hw *hw, u16 reg, u16 *value)
+{
+ return ixgbe_read_i2c_combined_unlocked(hw, IXGBE_CS4227, reg, value);
+}
+
+/**
+ * ixgbe_write_cs4227 - Write CS4227 register
+ * @hw: pointer to hardware structure
+ * @reg: register number to write
+ * @value: value to write to register
+ *
+ * Returns status code
+ **/
+static s32 ixgbe_write_cs4227(struct ixgbe_hw *hw, u16 reg, u16 value)
+{
+ return ixgbe_write_i2c_combined_unlocked(hw, IXGBE_CS4227, reg, value);
+}
+
+/**
+ * ixgbe_get_cs4227_status - Return CS4227 status
+ * @hw: pointer to hardware structure
+ *
+ * Returns error if CS4227 not successfully initialized
+ **/
+static s32 ixgbe_get_cs4227_status(struct ixgbe_hw *hw)
+{
+ s32 status;
+ u16 value = 0;
+ u16 reg_slice, reg_val;
+ u8 retry;
+
+ for (retry = 0; retry < IXGBE_CS4227_RETRIES; ++retry) {
+ status = ixgbe_read_cs4227(hw, IXGBE_CS4227_GLOBAL_ID_LSB,
+ &value);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ if (value == IXGBE_CS4227_GLOBAL_ID_VALUE)
+ break;
+ msec_delay(IXGBE_CS4227_CHECK_DELAY);
+ }
+ if (value != IXGBE_CS4227_GLOBAL_ID_VALUE)
+ return IXGBE_ERR_PHY;
+
+ status = ixgbe_read_cs4227(hw, IXGBE_CS4227_SCRATCH, &value);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* If this is the first time after power-on, check the ucode.
+ * Otherwise, this will disrupt link on all ports. Because we
+ * can only do this the first time, we must check all ports,
+ * not just our own.
+ */
+ if (value != IXGBE_CS4227_SCRATCH_VALUE) {
+ reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB;
+ reg_val = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1;
+ status = ixgbe_write_cs4227(hw, reg_slice,
+ reg_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ reg_slice = IXGBE_CS4227_HOST_SPARE24_LSB;
+ reg_val = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1;
+ status = ixgbe_write_cs4227(hw, reg_slice,
+ reg_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB + (1 << 12);
+ reg_val = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1;
+ status = ixgbe_write_cs4227(hw, reg_slice,
+ reg_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ reg_slice = IXGBE_CS4227_HOST_SPARE24_LSB + (1 << 12);
+ reg_val = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1;
+ status = ixgbe_write_cs4227(hw, reg_slice,
+ reg_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ msec_delay(10);
+ }
+
+ /* Verify that the ucode is operational on all ports. */
+ reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB;
+ reg_val = 0xFFFF;
+ status = ixgbe_read_cs4227(hw, reg_slice, ®_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ if (reg_val != 0)
+ return IXGBE_ERR_PHY;
+
+ reg_slice = IXGBE_CS4227_HOST_SPARE24_LSB;
+ reg_val = 0xFFFF;
+ status = ixgbe_read_cs4227(hw, reg_slice, ®_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ if (reg_val != 0)
+ return IXGBE_ERR_PHY;
+
+ reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB + (1 << 12);
+ reg_val = 0xFFFF;
+ status = ixgbe_read_cs4227(hw, reg_slice, ®_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ if (reg_val != 0)
+ return IXGBE_ERR_PHY;
+
+ reg_slice = IXGBE_CS4227_HOST_SPARE24_LSB + (1 << 12);
+ reg_val = 0xFFFF;
+ status = ixgbe_read_cs4227(hw, reg_slice, ®_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ if (reg_val != 0)
+ return IXGBE_ERR_PHY;
+
+ /* Set scratch for next time. */
+ status = ixgbe_write_cs4227(hw, IXGBE_CS4227_SCRATCH,
+ IXGBE_CS4227_SCRATCH_VALUE);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ status = ixgbe_read_cs4227(hw, IXGBE_CS4227_SCRATCH, &value);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ if (value != IXGBE_CS4227_SCRATCH_VALUE)
+ return IXGBE_ERR_PHY;
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_read_pe - Read register from port expander
+ * @hw: pointer to hardware structure
+ * @reg: register number to read
+ * @value: pointer to receive read value
+ *
+ * Returns status code
+ **/
+static s32 ixgbe_read_pe(struct ixgbe_hw *hw, u8 reg, u8 *value)
+{
+ s32 status;
+
+ status = ixgbe_read_i2c_byte_unlocked(hw, reg, IXGBE_PE, value);
+ if (status != IXGBE_SUCCESS)
+ ERROR_REPORT2(IXGBE_ERROR_CAUTION,
+ "port expander access failed with %d\n", status);
+ return status;
+}
+
+/**
+ * ixgbe_write_pe - Write register to port expander
+ * @hw: pointer to hardware structure
+ * @reg: register number to write
+ * @value: value to write
+ *
+ * Returns status code
+ **/
+static s32 ixgbe_write_pe(struct ixgbe_hw *hw, u8 reg, u8 value)
+{
+ s32 status;
+
+ status = ixgbe_write_i2c_byte_unlocked(hw, reg, IXGBE_PE, value);
+ if (status != IXGBE_SUCCESS)
+ ERROR_REPORT2(IXGBE_ERROR_CAUTION,
+ "port expander access failed with %d\n", status);
+ return status;
+}
+
+/**
+ * ixgbe_reset_cs4227 - Reset CS4227 using port expander
+ * @hw: pointer to hardware structure
+ *
+ * Returns error code
+ **/
+static s32 ixgbe_reset_cs4227(struct ixgbe_hw *hw)
+{
+ s32 status;
+ u8 reg;
+
+ status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT, ®);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ reg |= IXGBE_PE_BIT1;
+ status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT, reg);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ status = ixgbe_read_pe(hw, IXGBE_PE_CONFIG, ®);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ reg &= ~IXGBE_PE_BIT1;
+ status = ixgbe_write_pe(hw, IXGBE_PE_CONFIG, reg);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT, ®);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ reg &= ~IXGBE_PE_BIT1;
+ status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT, reg);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ usec_delay(IXGBE_CS4227_RESET_HOLD);
+
+ status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT, ®);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ reg |= IXGBE_PE_BIT1;
+ status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT, reg);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ msec_delay(IXGBE_CS4227_RESET_DELAY);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_check_cs4227 - Check CS4227 and reset as needed
+ * @hw: pointer to hardware structure
+ **/
+static void ixgbe_check_cs4227(struct ixgbe_hw *hw)
+{
+ u32 swfw_mask = hw->phy.phy_semaphore_mask;
+ s32 status;
+ u8 retry;
+
+ for (retry = 0; retry < IXGBE_CS4227_RETRIES; retry++) {
+ status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask);
+ if (status != IXGBE_SUCCESS) {
+ ERROR_REPORT2(IXGBE_ERROR_CAUTION,
+ "semaphore failed with %d\n", status);
+ return;
+ }
+ status = ixgbe_get_cs4227_status(hw);
+ if (status == IXGBE_SUCCESS) {
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+ msec_delay(hw->eeprom.semaphore_delay);
+ return;
+ }
+ ixgbe_reset_cs4227(hw);
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+ msec_delay(hw->eeprom.semaphore_delay);
+ }
+ ERROR_REPORT2(IXGBE_ERROR_CAUTION,
+ "Unable to initialize CS4227, err=%d\n", status);
+}
+
+/**
+ * ixgbe_setup_mux_ctl - Setup ESDP register for I2C mux control
+ * @hw: pointer to hardware structure
+ **/
+static void ixgbe_setup_mux_ctl(struct ixgbe_hw *hw)
+{
+ u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+
+ if (hw->bus.lan_id) {
+ esdp &= ~(IXGBE_ESDP_SDP1_NATIVE | IXGBE_ESDP_SDP1);
+ esdp |= IXGBE_ESDP_SDP1_DIR;
+ }
+ esdp &= ~(IXGBE_ESDP_SDP0_NATIVE | IXGBE_ESDP_SDP0_DIR);
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+ IXGBE_WRITE_FLUSH(hw);
+}
+
+/**
+ * ixgbe_identify_phy_x550em - Get PHY type based on device id
+ * @hw: pointer to hardware structure
+ *
+ * Returns error code
+ */
+static s32 ixgbe_identify_phy_x550em(struct ixgbe_hw *hw)
+{
+ switch (hw->device_id) {
+ case IXGBE_DEV_ID_X550EM_X_SFP:
+ /* set up for CS4227 usage */
+ hw->phy.phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM;
+ ixgbe_setup_mux_ctl(hw);
+ ixgbe_check_cs4227(hw);
+
+ return ixgbe_identify_module_generic(hw);
+ break;
+ case IXGBE_DEV_ID_X550EM_X_KX4:
+ hw->phy.type = ixgbe_phy_x550em_kx4;
+ break;
+ case IXGBE_DEV_ID_X550EM_X_KR:
+ hw->phy.type = ixgbe_phy_x550em_kr;
+ break;
+ case IXGBE_DEV_ID_X550EM_X_1G_T:
+ case IXGBE_DEV_ID_X550EM_X_10G_T:
+ return ixgbe_identify_phy_generic(hw);
+ default:
+ break;
+ }
+ return IXGBE_SUCCESS;
+}
+
+static s32 ixgbe_read_phy_reg_x550em(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u16 *phy_data)
+{
+ UNREFERENCED_4PARAMETER(*hw, reg_addr, device_type, *phy_data);
+ return IXGBE_NOT_IMPLEMENTED;
+}
+
+static s32 ixgbe_write_phy_reg_x550em(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u16 phy_data)
+{
+ UNREFERENCED_4PARAMETER(*hw, reg_addr, device_type, phy_data);
+ return IXGBE_NOT_IMPLEMENTED;
+}
+
+/**
+* ixgbe_init_ops_X550EM - Inits func ptrs and MAC type
+* @hw: pointer to hardware structure
+*
+* Initialize the function pointers and for MAC type X550EM.
+* Does not touch the hardware.
+**/
+s32 ixgbe_init_ops_X550EM(struct ixgbe_hw *hw)
+{
+ struct ixgbe_mac_info *mac = &hw->mac;
+ struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+ struct ixgbe_phy_info *phy = &hw->phy;
+ s32 ret_val;
+
+ DEBUGFUNC("ixgbe_init_ops_X550EM");
+
+ /* Similar to X550 so start there. */
+ ret_val = ixgbe_init_ops_X550(hw);
+
+ /* Since this function eventually calls
+ * ixgbe_init_ops_540 by design, we are setting
+ * the pointers to NULL explicitly here to overwrite
+ * the values being set in the x540 function.
+ */
+
+ /* FCOE not supported in x550EM */
+ mac->ops.get_san_mac_addr = NULL;
+ mac->ops.set_san_mac_addr = NULL;
+ mac->ops.get_wwn_prefix = NULL;
+ mac->ops.get_fcoe_boot_status = NULL;
+
+ /* IPsec not supported in x550EM */
+ mac->ops.disable_sec_rx_path = NULL;
+ mac->ops.enable_sec_rx_path = NULL;
+
+ /* AUTOC register is not present in x550EM. */
+ mac->ops.prot_autoc_read = NULL;
+ mac->ops.prot_autoc_write = NULL;
+
+ /* X550EM bus type is internal*/
+ hw->bus.type = ixgbe_bus_type_internal;
+ mac->ops.get_bus_info = ixgbe_get_bus_info_X550em;
+
+ mac->ops.read_iosf_sb_reg = ixgbe_read_iosf_sb_reg_x550;
+ mac->ops.write_iosf_sb_reg = ixgbe_write_iosf_sb_reg_x550;
+ mac->ops.get_media_type = ixgbe_get_media_type_X550em;
+ mac->ops.setup_sfp = ixgbe_setup_sfp_modules_X550em;
+ mac->ops.get_link_capabilities = ixgbe_get_link_capabilities_X550em;
+ mac->ops.reset_hw = ixgbe_reset_hw_X550em;
+ mac->ops.get_supported_physical_layer =
+ ixgbe_get_supported_physical_layer_X550em;
+
+ if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper)
+ mac->ops.setup_fc = ixgbe_setup_fc_generic;
+ else
+ mac->ops.setup_fc = ixgbe_setup_fc_X550em;
+
+ mac->ops.acquire_swfw_sync = ixgbe_acquire_swfw_sync_X550em;
+ mac->ops.release_swfw_sync = ixgbe_release_swfw_sync_X550em;
+
+ if (hw->device_id != IXGBE_DEV_ID_X550EM_X_KR)
+ mac->ops.setup_eee = NULL;
+
+ /* PHY */
+ phy->ops.init = ixgbe_init_phy_ops_X550em;
+ phy->ops.identify = ixgbe_identify_phy_x550em;
+ if (mac->ops.get_media_type(hw) != ixgbe_media_type_copper)
+ phy->ops.set_phy_power = NULL;
+
+
+ /* EEPROM */
+ eeprom->ops.init_params = ixgbe_init_eeprom_params_X540;
+ eeprom->ops.read = ixgbe_read_ee_hostif_X550;
+ eeprom->ops.read_buffer = ixgbe_read_ee_hostif_buffer_X550;
+ eeprom->ops.write = ixgbe_write_ee_hostif_X550;
+ eeprom->ops.write_buffer = ixgbe_write_ee_hostif_buffer_X550;
+ eeprom->ops.update_checksum = ixgbe_update_eeprom_checksum_X550;
+ eeprom->ops.validate_checksum = ixgbe_validate_eeprom_checksum_X550;
+ eeprom->ops.calc_checksum = ixgbe_calc_eeprom_checksum_X550;
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_dmac_config_X550
+ * @hw: pointer to hardware structure
+ *
+ * Configure DMA coalescing. If enabling dmac, dmac is activated.
+ * When disabling dmac, dmac enable dmac bit is cleared.
+ **/
+s32 ixgbe_dmac_config_X550(struct ixgbe_hw *hw)
+{
+ u32 reg, high_pri_tc;
+
+ DEBUGFUNC("ixgbe_dmac_config_X550");
+
+ /* Disable DMA coalescing before configuring */
+ reg = IXGBE_READ_REG(hw, IXGBE_DMACR);
+ reg &= ~IXGBE_DMACR_DMAC_EN;
+ IXGBE_WRITE_REG(hw, IXGBE_DMACR, reg);
+
+ /* Disable DMA Coalescing if the watchdog timer is 0 */
+ if (!hw->mac.dmac_config.watchdog_timer)
+ goto out;
+
+ ixgbe_dmac_config_tcs_X550(hw);
+
+ /* Configure DMA Coalescing Control Register */
+ reg = IXGBE_READ_REG(hw, IXGBE_DMACR);
+
+ /* Set the watchdog timer in units of 40.96 usec */
+ reg &= ~IXGBE_DMACR_DMACWT_MASK;
+ reg |= (hw->mac.dmac_config.watchdog_timer * 100) / 4096;
+
+ reg &= ~IXGBE_DMACR_HIGH_PRI_TC_MASK;
+ /* If fcoe is enabled, set high priority traffic class */
+ if (hw->mac.dmac_config.fcoe_en) {
+ high_pri_tc = 1 << hw->mac.dmac_config.fcoe_tc;
+ reg |= ((high_pri_tc << IXGBE_DMACR_HIGH_PRI_TC_SHIFT) &
+ IXGBE_DMACR_HIGH_PRI_TC_MASK);
+ }
+ reg |= IXGBE_DMACR_EN_MNG_IND;
+
+ /* Enable DMA coalescing after configuration */
+ reg |= IXGBE_DMACR_DMAC_EN;
+ IXGBE_WRITE_REG(hw, IXGBE_DMACR, reg);
+
+out:
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_dmac_config_tcs_X550
+ * @hw: pointer to hardware structure
+ *
+ * Configure DMA coalescing threshold per TC. The dmac enable bit must
+ * be cleared before configuring.
+ **/
+s32 ixgbe_dmac_config_tcs_X550(struct ixgbe_hw *hw)
+{
+ u32 tc, reg, pb_headroom, rx_pb_size, maxframe_size_kb;
+
+ DEBUGFUNC("ixgbe_dmac_config_tcs_X550");
+
+ /* Configure DMA coalescing enabled */
+ switch (hw->mac.dmac_config.link_speed) {
+ case IXGBE_LINK_SPEED_100_FULL:
+ pb_headroom = IXGBE_DMACRXT_100M;
+ break;
+ case IXGBE_LINK_SPEED_1GB_FULL:
+ pb_headroom = IXGBE_DMACRXT_1G;
+ break;
+ default:
+ pb_headroom = IXGBE_DMACRXT_10G;
+ break;
+ }
+
+ maxframe_size_kb = ((IXGBE_READ_REG(hw, IXGBE_MAXFRS) >>
+ IXGBE_MHADD_MFS_SHIFT) / 1024);
+
+ /* Set the per Rx packet buffer receive threshold */
+ for (tc = 0; tc < IXGBE_DCB_MAX_TRAFFIC_CLASS; tc++) {
+ reg = IXGBE_READ_REG(hw, IXGBE_DMCTH(tc));
+ reg &= ~IXGBE_DMCTH_DMACRXT_MASK;
+
+ if (tc < hw->mac.dmac_config.num_tcs) {
+ /* Get Rx PB size */
+ rx_pb_size = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(tc));
+ rx_pb_size = (rx_pb_size & IXGBE_RXPBSIZE_MASK) >>
+ IXGBE_RXPBSIZE_SHIFT;
+
+ /* Calculate receive buffer threshold in kilobytes */
+ if (rx_pb_size > pb_headroom)
+ rx_pb_size = rx_pb_size - pb_headroom;
+ else
+ rx_pb_size = 0;
+
+ /* Minimum of MFS shall be set for DMCTH */
+ reg |= (rx_pb_size > maxframe_size_kb) ?
+ rx_pb_size : maxframe_size_kb;
+ }
+ IXGBE_WRITE_REG(hw, IXGBE_DMCTH(tc), reg);
+ }
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_dmac_update_tcs_X550
+ * @hw: pointer to hardware structure
+ *
+ * Disables dmac, updates per TC settings, and then enables dmac.
+ **/
+s32 ixgbe_dmac_update_tcs_X550(struct ixgbe_hw *hw)
+{
+ u32 reg;
+
+ DEBUGFUNC("ixgbe_dmac_update_tcs_X550");
+
+ /* Disable DMA coalescing before configuring */
+ reg = IXGBE_READ_REG(hw, IXGBE_DMACR);
+ reg &= ~IXGBE_DMACR_DMAC_EN;
+ IXGBE_WRITE_REG(hw, IXGBE_DMACR, reg);
+
+ ixgbe_dmac_config_tcs_X550(hw);
+
+ /* Enable DMA coalescing after configuration */
+ reg = IXGBE_READ_REG(hw, IXGBE_DMACR);
+ reg |= IXGBE_DMACR_DMAC_EN;
+ IXGBE_WRITE_REG(hw, IXGBE_DMACR, reg);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_init_eeprom_params_X550 - Initialize EEPROM params
+ * @hw: pointer to hardware structure
+ *
+ * Initializes the EEPROM parameters ixgbe_eeprom_info within the
+ * ixgbe_hw struct in order to set up EEPROM access.
+ **/
+s32 ixgbe_init_eeprom_params_X550(struct ixgbe_hw *hw)
+{
+ struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+ u32 eec;
+ u16 eeprom_size;
+
+ DEBUGFUNC("ixgbe_init_eeprom_params_X550");
+
+ if (eeprom->type == ixgbe_eeprom_uninitialized) {
+ eeprom->semaphore_delay = 10;
+ eeprom->type = ixgbe_flash;
+
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+ eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >>
+ IXGBE_EEC_SIZE_SHIFT);
+ eeprom->word_size = 1 << (eeprom_size +
+ IXGBE_EEPROM_WORD_SIZE_SHIFT);
+
+ DEBUGOUT2("Eeprom params: type = %d, size = %d\n",
+ eeprom->type, eeprom->word_size);
+ }
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_setup_eee_X550 - Enable/disable EEE support
+ * @hw: pointer to the HW structure
+ * @enable_eee: boolean flag to enable EEE
+ *
+ * Enable/disable EEE based on enable_eee flag.
+ * Auto-negotiation must be started after BASE-T EEE bits in PHY register 7.3C
+ * are modified.
+ *
+ **/
+s32 ixgbe_setup_eee_X550(struct ixgbe_hw *hw, bool enable_eee)
+{
+ u32 eeer;
+ u16 autoneg_eee_reg;
+ u32 link_reg;
+ s32 status;
+ u32 fuse;
+
+ DEBUGFUNC("ixgbe_setup_eee_X550");
+
+ eeer = IXGBE_READ_REG(hw, IXGBE_EEER);
+ /* Enable or disable EEE per flag */
+ if (enable_eee) {
+ eeer |= (IXGBE_EEER_TX_LPI_EN | IXGBE_EEER_RX_LPI_EN);
+
+ if (hw->device_id == IXGBE_DEV_ID_X550T) {
+ /* Advertise EEE capability */
+ hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_EEE_ADVT,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_eee_reg);
+
+ autoneg_eee_reg |= (IXGBE_AUTO_NEG_10GBASE_EEE_ADVT |
+ IXGBE_AUTO_NEG_1000BASE_EEE_ADVT |
+ IXGBE_AUTO_NEG_100BASE_EEE_ADVT);
+
+ hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_EEE_ADVT,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_eee_reg);
+ } else if (hw->device_id == IXGBE_DEV_ID_X550EM_X_KR) {
+ /* Not supported on first revision. */
+ fuse = IXGBE_READ_REG(hw, IXGBE_FUSES0_GROUP(0));
+ if (!(fuse & IXGBE_FUSES0_REV1))
+ return IXGBE_SUCCESS;
+
+ status = ixgbe_read_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, &link_reg);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ link_reg |= IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KR |
+ IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KX;
+
+ /* Don't advertise FEC capability when EEE enabled. */
+ link_reg &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_FEC;
+
+ status = ixgbe_write_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, link_reg);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ }
+ } else {
+ eeer &= ~(IXGBE_EEER_TX_LPI_EN | IXGBE_EEER_RX_LPI_EN);
+
+ if (hw->device_id == IXGBE_DEV_ID_X550T) {
+ /* Disable advertised EEE capability */
+ hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_EEE_ADVT,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_eee_reg);
+
+ autoneg_eee_reg &= ~(IXGBE_AUTO_NEG_10GBASE_EEE_ADVT |
+ IXGBE_AUTO_NEG_1000BASE_EEE_ADVT |
+ IXGBE_AUTO_NEG_100BASE_EEE_ADVT);
+
+ hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_EEE_ADVT,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_eee_reg);
+ } else if (hw->device_id == IXGBE_DEV_ID_X550EM_X_KR) {
+ status = ixgbe_read_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, &link_reg);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ link_reg &= ~(IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KR |
+ IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KX);
+
+ /* Advertise FEC capability when EEE is disabled. */
+ link_reg |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_FEC;
+
+ status = ixgbe_write_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, link_reg);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ }
+ }
+ IXGBE_WRITE_REG(hw, IXGBE_EEER, eeer);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_set_source_address_pruning_X550 - Enable/Disbale source address pruning
+ * @hw: pointer to hardware structure
+ * @enable: enable or disable source address pruning
+ * @pool: Rx pool to set source address pruning for
+ **/
+void ixgbe_set_source_address_pruning_X550(struct ixgbe_hw *hw, bool enable,
+ unsigned int pool)
+{
+ u64 pfflp;
+
+ /* max rx pool is 63 */
+ if (pool > 63)
+ return;
+
+ pfflp = (u64)IXGBE_READ_REG(hw, IXGBE_PFFLPL);
+ pfflp |= (u64)IXGBE_READ_REG(hw, IXGBE_PFFLPH) << 32;
+
+ if (enable)
+ pfflp |= (1ULL << pool);
+ else
+ pfflp &= ~(1ULL << pool);
+
+ IXGBE_WRITE_REG(hw, IXGBE_PFFLPL, (u32)pfflp);
+ IXGBE_WRITE_REG(hw, IXGBE_PFFLPH, (u32)(pfflp >> 32));
+}
+
+/**
+ * ixgbe_set_ethertype_anti_spoofing_X550 - Enable/Disable Ethertype anti-spoofing
+ * @hw: pointer to hardware structure
+ * @enable: enable or disable switch for Ethertype anti-spoofing
+ * @vf: Virtual Function pool - VF Pool to set for Ethertype anti-spoofing
+ *
+ **/
+void ixgbe_set_ethertype_anti_spoofing_X550(struct ixgbe_hw *hw,
+ bool enable, int vf)
+{
+ int vf_target_reg = vf >> 3;
+ int vf_target_shift = vf % 8 + IXGBE_SPOOF_ETHERTYPEAS_SHIFT;
+ u32 pfvfspoof;
+
+ DEBUGFUNC("ixgbe_set_ethertype_anti_spoofing_X550");
+
+ pfvfspoof = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg));
+ if (enable)
+ pfvfspoof |= (1 << vf_target_shift);
+ else
+ pfvfspoof &= ~(1 << vf_target_shift);
+
+ IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg), pfvfspoof);
+}
+
+/**
+ * ixgbe_iosf_wait - Wait for IOSF command completion
+ * @hw: pointer to hardware structure
+ * @ctrl: pointer to location to receive final IOSF control value
+ *
+ * Returns failing status on timeout
+ *
+ * Note: ctrl can be NULL if the IOSF control register value is not needed
+ **/
+static s32 ixgbe_iosf_wait(struct ixgbe_hw *hw, u32 *ctrl)
+{
+ u32 i, command = 0;
+
+ /* Check every 10 usec to see if the address cycle completed.
+ * The SB IOSF BUSY bit will clear when the operation is
+ * complete
+ */
+ for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
+ command = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL);
+ if ((command & IXGBE_SB_IOSF_CTRL_BUSY) == 0)
+ break;
+ usec_delay(10);
+ }
+ if (ctrl)
+ *ctrl = command;
+ if (i == IXGBE_MDIO_COMMAND_TIMEOUT) {
+ ERROR_REPORT1(IXGBE_ERROR_POLLING, "Wait timed out\n");
+ return IXGBE_ERR_PHY;
+ }
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_write_iosf_sb_reg_x550 - Writes a value to specified register of the IOSF
+ * device
+ * @hw: pointer to hardware structure
+ * @reg_addr: 32 bit PHY register to write
+ * @device_type: 3 bit device type
+ * @data: Data to write to the register
+ **/
+s32 ixgbe_write_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u32 data)
+{
+ u32 gssr = IXGBE_GSSR_PHY1_SM | IXGBE_GSSR_PHY0_SM;
+ u32 command, error __unused;
+ s32 ret;
+
+ ret = ixgbe_acquire_swfw_semaphore(hw, gssr);
+ if (ret != IXGBE_SUCCESS)
+ return ret;
+
+ ret = ixgbe_iosf_wait(hw, NULL);
+ if (ret != IXGBE_SUCCESS)
+ goto out;
+
+ command = ((reg_addr << IXGBE_SB_IOSF_CTRL_ADDR_SHIFT) |
+ (device_type << IXGBE_SB_IOSF_CTRL_TARGET_SELECT_SHIFT));
+
+ /* Write IOSF control register */
+ IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL, command);
+
+ /* Write IOSF data register */
+ IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_DATA, data);
+
+ ret = ixgbe_iosf_wait(hw, &command);
+
+ if ((command & IXGBE_SB_IOSF_CTRL_RESP_STAT_MASK) != 0) {
+ error = (command & IXGBE_SB_IOSF_CTRL_CMPL_ERR_MASK) >>
+ IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT;
+ ERROR_REPORT2(IXGBE_ERROR_POLLING,
+ "Failed to write, error %x\n", error);
+ ret = IXGBE_ERR_PHY;
+ }
+
+out:
+ ixgbe_release_swfw_semaphore(hw, gssr);
+ return ret;
+}
+
+/**
+ * ixgbe_read_iosf_sb_reg_x550 - Writes a value to specified register of the IOSF
+ * device
+ * @hw: pointer to hardware structure
+ * @reg_addr: 32 bit PHY register to write
+ * @device_type: 3 bit device type
+ * @phy_data: Pointer to read data from the register
+ **/
+s32 ixgbe_read_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u32 *data)
+{
+ u32 gssr = IXGBE_GSSR_PHY1_SM | IXGBE_GSSR_PHY0_SM;
+ u32 command, error __unused;
+ s32 ret;
+
+ ret = ixgbe_acquire_swfw_semaphore(hw, gssr);
+ if (ret != IXGBE_SUCCESS)
+ return ret;
+
+ ret = ixgbe_iosf_wait(hw, NULL);
+ if (ret != IXGBE_SUCCESS)
+ goto out;
+
+ command = ((reg_addr << IXGBE_SB_IOSF_CTRL_ADDR_SHIFT) |
+ (device_type << IXGBE_SB_IOSF_CTRL_TARGET_SELECT_SHIFT));
+
+ /* Write IOSF control register */
+ IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL, command);
+
+ ret = ixgbe_iosf_wait(hw, &command);
+
+ if ((command & IXGBE_SB_IOSF_CTRL_RESP_STAT_MASK) != 0) {
+ error = (command & IXGBE_SB_IOSF_CTRL_CMPL_ERR_MASK) >>
+ IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT;
+ ERROR_REPORT2(IXGBE_ERROR_POLLING,
+ "Failed to read, error %x\n", error);
+ ret = IXGBE_ERR_PHY;
+ }
+
+ if (ret == IXGBE_SUCCESS)
+ *data = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_DATA);
+
+out:
+ ixgbe_release_swfw_semaphore(hw, gssr);
+ return ret;
+}
+
+/**
+ * ixgbe_disable_mdd_X550
+ * @hw: pointer to hardware structure
+ *
+ * Disable malicious driver detection
+ **/
+void ixgbe_disable_mdd_X550(struct ixgbe_hw *hw)
+{
+ u32 reg;
+
+ DEBUGFUNC("ixgbe_disable_mdd_X550");
+
+ /* Disable MDD for TX DMA and interrupt */
+ reg = IXGBE_READ_REG(hw, IXGBE_DMATXCTL);
+ reg &= ~(IXGBE_DMATXCTL_MDP_EN | IXGBE_DMATXCTL_MBINTEN);
+ IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL, reg);
+
+ /* Disable MDD for RX and interrupt */
+ reg = IXGBE_READ_REG(hw, IXGBE_RDRXCTL);
+ reg &= ~(IXGBE_RDRXCTL_MDP_EN | IXGBE_RDRXCTL_MBINTEN);
+ IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, reg);
+}
+
+/**
+ * ixgbe_enable_mdd_X550
+ * @hw: pointer to hardware structure
+ *
+ * Enable malicious driver detection
+ **/
+void ixgbe_enable_mdd_X550(struct ixgbe_hw *hw)
+{
+ u32 reg;
+
+ DEBUGFUNC("ixgbe_enable_mdd_X550");
+
+ /* Enable MDD for TX DMA and interrupt */
+ reg = IXGBE_READ_REG(hw, IXGBE_DMATXCTL);
+ reg |= (IXGBE_DMATXCTL_MDP_EN | IXGBE_DMATXCTL_MBINTEN);
+ IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL, reg);
+
+ /* Enable MDD for RX and interrupt */
+ reg = IXGBE_READ_REG(hw, IXGBE_RDRXCTL);
+ reg |= (IXGBE_RDRXCTL_MDP_EN | IXGBE_RDRXCTL_MBINTEN);
+ IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, reg);
+}
+
+/**
+ * ixgbe_restore_mdd_vf_X550
+ * @hw: pointer to hardware structure
+ * @vf: vf index
+ *
+ * Restore VF that was disabled during malicious driver detection event
+ **/
+void ixgbe_restore_mdd_vf_X550(struct ixgbe_hw *hw, u32 vf)
+{
+ u32 idx, reg, num_qs, start_q, bitmask;
+
+ DEBUGFUNC("ixgbe_restore_mdd_vf_X550");
+
+ /* Map VF to queues */
+ reg = IXGBE_READ_REG(hw, IXGBE_MRQC);
+ switch (reg & IXGBE_MRQC_MRQE_MASK) {
+ case IXGBE_MRQC_VMDQRT8TCEN:
+ num_qs = 8; /* 16 VFs / pools */
+ bitmask = 0x000000FF;
+ break;
+ case IXGBE_MRQC_VMDQRSS32EN:
+ case IXGBE_MRQC_VMDQRT4TCEN:
+ num_qs = 4; /* 32 VFs / pools */
+ bitmask = 0x0000000F;
+ break;
+ default: /* 64 VFs / pools */
+ num_qs = 2;
+ bitmask = 0x00000003;
+ break;
+ }
+ start_q = vf * num_qs;
+
+ /* Release vf's queues by clearing WQBR_TX and WQBR_RX (RW1C) */
+ idx = start_q / 32;
+ reg = 0;
+ reg |= (bitmask << (start_q % 32));
+ IXGBE_WRITE_REG(hw, IXGBE_WQBR_TX(idx), reg);
+ IXGBE_WRITE_REG(hw, IXGBE_WQBR_RX(idx), reg);
+}
+
+/**
+ * ixgbe_mdd_event_X550
+ * @hw: pointer to hardware structure
+ * @vf_bitmap: vf bitmap of malicious vfs
+ *
+ * Handle malicious driver detection event.
+ **/
+void ixgbe_mdd_event_X550(struct ixgbe_hw *hw, u32 *vf_bitmap)
+{
+ u32 wqbr;
+ u32 i, j, reg, q, shift, vf, idx;
+
+ DEBUGFUNC("ixgbe_mdd_event_X550");
+
+ /* figure out pool size for mapping to vf's */
+ reg = IXGBE_READ_REG(hw, IXGBE_MRQC);
+ switch (reg & IXGBE_MRQC_MRQE_MASK) {
+ case IXGBE_MRQC_VMDQRT8TCEN:
+ shift = 3; /* 16 VFs / pools */
+ break;
+ case IXGBE_MRQC_VMDQRSS32EN:
+ case IXGBE_MRQC_VMDQRT4TCEN:
+ shift = 2; /* 32 VFs / pools */
+ break;
+ default:
+ shift = 1; /* 64 VFs / pools */
+ break;
+ }
+
+ /* Read WQBR_TX and WQBR_RX and check for malicious queues */
+ for (i = 0; i < 4; i++) {
+ wqbr = IXGBE_READ_REG(hw, IXGBE_WQBR_TX(i));
+ wqbr |= IXGBE_READ_REG(hw, IXGBE_WQBR_RX(i));
+
+ if (!wqbr)
+ continue;
+
+ /* Get malicious queue */
+ for (j = 0; j < 32 && wqbr; j++) {
+
+ if (!(wqbr & (1 << j)))
+ continue;
+
+ /* Get queue from bitmask */
+ q = j + (i * 32);
+
+ /* Map queue to vf */
+ vf = (q >> shift);
+
+ /* Set vf bit in vf_bitmap */
+ idx = vf / 32;
+ vf_bitmap[idx] |= (1 << (vf % 32));
+ wqbr &= ~(1 << j);
+ }
+ }
+}
+
+/**
+ * ixgbe_get_media_type_X550em - Get media type
+ * @hw: pointer to hardware structure
+ *
+ * Returns the media type (fiber, copper, backplane)
+ */
+enum ixgbe_media_type ixgbe_get_media_type_X550em(struct ixgbe_hw *hw)
+{
+ enum ixgbe_media_type media_type;
+
+ DEBUGFUNC("ixgbe_get_media_type_X550em");
+
+ /* Detect if there is a copper PHY attached. */
+ switch (hw->device_id) {
+ case IXGBE_DEV_ID_X550EM_X_KR:
+ case IXGBE_DEV_ID_X550EM_X_KX4:
+ media_type = ixgbe_media_type_backplane;
+ break;
+ case IXGBE_DEV_ID_X550EM_X_SFP:
+ media_type = ixgbe_media_type_fiber;
+ break;
+ case IXGBE_DEV_ID_X550EM_X_1G_T:
+ case IXGBE_DEV_ID_X550EM_X_10G_T:
+ media_type = ixgbe_media_type_copper;
+ break;
+ default:
+ media_type = ixgbe_media_type_unknown;
+ break;
+ }
+ return media_type;
+}
+
+/**
+ * ixgbe_supported_sfp_modules_X550em - Check if SFP module type is supported
+ * @hw: pointer to hardware structure
+ * @linear: TRUE if SFP module is linear
+ */
+static s32 ixgbe_supported_sfp_modules_X550em(struct ixgbe_hw *hw, bool *linear)
+{
+ DEBUGFUNC("ixgbe_supported_sfp_modules_X550em");
+
+ switch (hw->phy.sfp_type) {
+ case ixgbe_sfp_type_not_present:
+ return IXGBE_ERR_SFP_NOT_PRESENT;
+ case ixgbe_sfp_type_da_cu_core0:
+ case ixgbe_sfp_type_da_cu_core1:
+ *linear = TRUE;
+ break;
+ case ixgbe_sfp_type_srlr_core0:
+ case ixgbe_sfp_type_srlr_core1:
+ case ixgbe_sfp_type_da_act_lmt_core0:
+ case ixgbe_sfp_type_da_act_lmt_core1:
+ case ixgbe_sfp_type_1g_sx_core0:
+ case ixgbe_sfp_type_1g_sx_core1:
+ case ixgbe_sfp_type_1g_lx_core0:
+ case ixgbe_sfp_type_1g_lx_core1:
+ *linear = FALSE;
+ break;
+ case ixgbe_sfp_type_unknown:
+ case ixgbe_sfp_type_1g_cu_core0:
+ case ixgbe_sfp_type_1g_cu_core1:
+ default:
+ return IXGBE_ERR_SFP_NOT_SUPPORTED;
+ }
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_identify_sfp_module_X550em - Identifies SFP modules
+ * @hw: pointer to hardware structure
+ *
+ * Searches for and identifies the SFP module and assigns appropriate PHY type.
+ **/
+s32 ixgbe_identify_sfp_module_X550em(struct ixgbe_hw *hw)
+{
+ s32 status;
+ bool linear;
+
+ DEBUGFUNC("ixgbe_identify_sfp_module_X550em");
+
+ status = ixgbe_identify_module_generic(hw);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* Check if SFP module is supported */
+ status = ixgbe_supported_sfp_modules_X550em(hw, &linear);
+
+ return status;
+}
+
+/**
+ * ixgbe_setup_sfp_modules_X550em - Setup MAC link ops
+ * @hw: pointer to hardware structure
+ */
+s32 ixgbe_setup_sfp_modules_X550em(struct ixgbe_hw *hw)
+{
+ s32 status;
+ bool linear;
+
+ DEBUGFUNC("ixgbe_setup_sfp_modules_X550em");
+
+ /* Check if SFP module is supported */
+ status = ixgbe_supported_sfp_modules_X550em(hw, &linear);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ ixgbe_init_mac_link_ops_X550em(hw);
+ hw->phy.ops.reset = NULL;
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_init_mac_link_ops_X550em - init mac link function pointers
+ * @hw: pointer to hardware structure
+ */
+void ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw *hw)
+{
+ struct ixgbe_mac_info *mac = &hw->mac;
+
+ DEBUGFUNC("ixgbe_init_mac_link_ops_X550em");
+
+ switch (hw->mac.ops.get_media_type(hw)) {
+ case ixgbe_media_type_fiber:
+ /* CS4227 does not support autoneg, so disable the laser control
+ * functions for SFP+ fiber
+ */
+ mac->ops.disable_tx_laser = NULL;
+ mac->ops.enable_tx_laser = NULL;
+ mac->ops.flap_tx_laser = NULL;
+ mac->ops.setup_link = ixgbe_setup_mac_link_multispeed_fiber;
+ mac->ops.setup_mac_link = ixgbe_setup_mac_link_sfp_x550em;
+ mac->ops.set_rate_select_speed =
+ ixgbe_set_soft_rate_select_speed;
+ break;
+ case ixgbe_media_type_copper:
+ mac->ops.setup_link = ixgbe_setup_mac_link_t_X550em;
+ mac->ops.check_link = ixgbe_check_link_t_X550em;
+ break;
+ default:
+ break;
+ }
+}
+
+/**
+ * ixgbe_get_link_capabilities_x550em - Determines link capabilities
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @autoneg: TRUE when autoneg or autotry is enabled
+ */
+s32 ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *autoneg)
+{
+ DEBUGFUNC("ixgbe_get_link_capabilities_X550em");
+
+ /* SFP */
+ if (hw->phy.media_type == ixgbe_media_type_fiber) {
+
+ /* CS4227 SFP must not enable auto-negotiation */
+ *autoneg = FALSE;
+
+ /* Check if 1G SFP module. */
+ if (hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1
+ || hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1) {
+ *speed = IXGBE_LINK_SPEED_1GB_FULL;
+ return IXGBE_SUCCESS;
+ }
+
+ /* Link capabilities are based on SFP */
+ if (hw->phy.multispeed_fiber)
+ *speed = IXGBE_LINK_SPEED_10GB_FULL |
+ IXGBE_LINK_SPEED_1GB_FULL;
+ else
+ *speed = IXGBE_LINK_SPEED_10GB_FULL;
+ } else {
+ *speed = IXGBE_LINK_SPEED_10GB_FULL |
+ IXGBE_LINK_SPEED_1GB_FULL;
+ *autoneg = TRUE;
+ }
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_get_lasi_ext_t_x550em - Determime external Base T PHY interrupt cause
+ * @hw: pointer to hardware structure
+ * @lsc: pointer to boolean flag which indicates whether external Base T
+ * PHY interrupt is lsc
+ *
+ * Determime if external Base T PHY interrupt cause is high temperature
+ * failure alarm or link status change.
+ *
+ * Return IXGBE_ERR_OVERTEMP if interrupt is high temperature
+ * failure alarm, else return PHY access status.
+ */
+static s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc)
+{
+ u32 status;
+ u16 reg;
+
+ *lsc = FALSE;
+
+ /* Vendor alarm triggered */
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_CHIP_STD_INT_FLAG,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+ ®);
+
+ if (status != IXGBE_SUCCESS ||
+ !(reg & IXGBE_MDIO_GLOBAL_VEN_ALM_INT_EN))
+ return status;
+
+ /* Vendor Auto-Neg alarm triggered or Global alarm 1 triggered */
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_FLAG,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+ ®);
+
+ if (status != IXGBE_SUCCESS ||
+ !(reg & (IXGBE_MDIO_GLOBAL_AN_VEN_ALM_INT_EN |
+ IXGBE_MDIO_GLOBAL_ALARM_1_INT)))
+ return status;
+
+ /* High temperature failure alarm triggered */
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_ALARM_1,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+ ®);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* If high temperature failure, then return over temp error and exit */
+ if (reg & IXGBE_MDIO_GLOBAL_ALM_1_HI_TMP_FAIL) {
+ /* power down the PHY in case the PHY FW didn't already */
+ ixgbe_set_copper_phy_power(hw, FALSE);
+ return IXGBE_ERR_OVERTEMP;
+ }
+
+ /* Vendor alarm 2 triggered */
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_CHIP_STD_INT_FLAG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE, ®);
+
+ if (status != IXGBE_SUCCESS ||
+ !(reg & IXGBE_MDIO_GLOBAL_STD_ALM2_INT))
+ return status;
+
+ /* link connect/disconnect event occurred */
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM2,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE, ®);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* Indicate LSC */
+ if (reg & IXGBE_MDIO_AUTO_NEG_VEN_LSC)
+ *lsc = TRUE;
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_enable_lasi_ext_t_x550em - Enable external Base T PHY interrupts
+ * @hw: pointer to hardware structure
+ *
+ * Enable link status change and temperature failure alarm for the external
+ * Base T PHY
+ *
+ * Returns PHY access status
+ */
+static s32 ixgbe_enable_lasi_ext_t_x550em(struct ixgbe_hw *hw)
+{
+ u32 status;
+ u16 reg;
+ bool lsc;
+
+ /* Clear interrupt flags */
+ status = ixgbe_get_lasi_ext_t_x550em(hw, &lsc);
+
+ /* Enable link status change alarm */
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE, ®);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ reg |= IXGBE_MDIO_PMA_TX_VEN_LASI_INT_EN;
+
+ status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE, reg);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* Enables high temperature failure alarm */
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_MASK,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+ ®);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ reg |= IXGBE_MDIO_GLOBAL_INT_HI_TEMP_EN;
+
+ status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_MASK,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+ reg);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* Enable vendor Auto-Neg alarm and Global Interrupt Mask 1 alarm */
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_MASK,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+ ®);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ reg |= (IXGBE_MDIO_GLOBAL_AN_VEN_ALM_INT_EN |
+ IXGBE_MDIO_GLOBAL_ALARM_1_INT);
+
+ status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_MASK,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+ reg);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* Enable chip-wide vendor alarm */
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_STD_MASK,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+ ®);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ reg |= IXGBE_MDIO_GLOBAL_VEN_ALM_INT_EN;
+
+ status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_STD_MASK,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+ reg);
+
+ return status;
+}
+
+/**
+ * ixgbe_setup_kr_speed_x550em - Configure the KR PHY for link speed.
+ * @hw: pointer to hardware structure
+ * @speed: link speed
+ *
+ * Configures the integrated KR PHY.
+ **/
+static s32 ixgbe_setup_kr_speed_x550em(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed)
+{
+ s32 status;
+ u32 reg_val;
+
+ status = ixgbe_read_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
+ if (status)
+ return status;
+
+ reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE;
+ reg_val &= ~(IXGBE_KRM_LINK_CTRL_1_TETH_AN_FEC_REQ |
+ IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_FEC);
+ reg_val &= ~(IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR |
+ IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX);
+
+ /* Advertise 10G support. */
+ if (speed & IXGBE_LINK_SPEED_10GB_FULL)
+ reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR;
+
+ /* Advertise 1G support. */
+ if (speed & IXGBE_LINK_SPEED_1GB_FULL)
+ reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX;
+
+ /* Restart auto-negotiation. */
+ reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART;
+ status = ixgbe_write_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+
+ return status;
+}
+
+/**
+ * ixgbe_init_phy_ops_X550em - PHY/SFP specific init
+ * @hw: pointer to hardware structure
+ *
+ * Initialize any function pointers that were not able to be
+ * set during init_shared_code because the PHY/SFP type was
+ * not known. Perform the SFP init if necessary.
+ */
+s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw)
+{
+ struct ixgbe_phy_info *phy = &hw->phy;
+ ixgbe_link_speed speed;
+ s32 ret_val;
+
+ DEBUGFUNC("ixgbe_init_phy_ops_X550em");
+
+ hw->mac.ops.set_lan_id(hw);
+
+ if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) {
+ phy->phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM;
+ ixgbe_setup_mux_ctl(hw);
+
+ /* Save NW management interface connected on board. This is used
+ * to determine internal PHY mode.
+ */
+ phy->nw_mng_if_sel = IXGBE_READ_REG(hw, IXGBE_NW_MNG_IF_SEL);
+
+ /* If internal PHY mode is KR, then initialize KR link */
+ if (phy->nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE) {
+ speed = IXGBE_LINK_SPEED_10GB_FULL |
+ IXGBE_LINK_SPEED_1GB_FULL;
+ ret_val = ixgbe_setup_kr_speed_x550em(hw, speed);
+ }
+
+ phy->ops.identify_sfp = ixgbe_identify_sfp_module_X550em;
+ }
+
+ /* Identify the PHY or SFP module */
+ ret_val = phy->ops.identify(hw);
+ if (ret_val == IXGBE_ERR_SFP_NOT_SUPPORTED)
+ return ret_val;
+
+ /* Setup function pointers based on detected hardware */
+ ixgbe_init_mac_link_ops_X550em(hw);
+ if (phy->sfp_type != ixgbe_sfp_type_unknown)
+ phy->ops.reset = NULL;
+
+ /* Set functions pointers based on phy type */
+ switch (hw->phy.type) {
+ case ixgbe_phy_x550em_kx4:
+ phy->ops.setup_link = ixgbe_setup_kx4_x550em;
+ phy->ops.read_reg = ixgbe_read_phy_reg_x550em;
+ phy->ops.write_reg = ixgbe_write_phy_reg_x550em;
+ break;
+ case ixgbe_phy_x550em_kr:
+ phy->ops.setup_link = ixgbe_setup_kr_x550em;
+ phy->ops.read_reg = ixgbe_read_phy_reg_x550em;
+ phy->ops.write_reg = ixgbe_write_phy_reg_x550em;
+ break;
+ case ixgbe_phy_x550em_ext_t:
+ /* Save NW management interface connected on board. This is used
+ * to determine internal PHY mode
+ */
+ phy->nw_mng_if_sel = IXGBE_READ_REG(hw, IXGBE_NW_MNG_IF_SEL);
+
+ /* If internal link mode is XFI, then setup iXFI internal link,
+ * else setup KR now.
+ */
+ if (!(phy->nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) {
+ phy->ops.setup_internal_link =
+ ixgbe_setup_internal_phy_t_x550em;
+ } else {
+ speed = IXGBE_LINK_SPEED_10GB_FULL |
+ IXGBE_LINK_SPEED_1GB_FULL;
+ ret_val = ixgbe_setup_kr_speed_x550em(hw, speed);
+ }
+
+ phy->ops.enter_lplu = ixgbe_enter_lplu_t_x550em;
+ phy->ops.handle_lasi = ixgbe_handle_lasi_ext_t_x550em;
+ phy->ops.reset = ixgbe_reset_phy_t_X550em;
+ break;
+ default:
+ break;
+ }
+ return ret_val;
+}
+
+/**
+ * ixgbe_reset_hw_X550em - Perform hardware reset
+ * @hw: pointer to hardware structure
+ *
+ * Resets the hardware by resetting the transmit and receive units, masks
+ * and clears all interrupts, perform a PHY reset, and perform a link (MAC)
+ * reset.
+ */
+s32 ixgbe_reset_hw_X550em(struct ixgbe_hw *hw)
+{
+ ixgbe_link_speed link_speed;
+ s32 status;
+ u32 ctrl = 0;
+ u32 i;
+ u32 hlreg0;
+ bool link_up = FALSE;
+
+ DEBUGFUNC("ixgbe_reset_hw_X550em");
+
+ /* Call adapter stop to disable Tx/Rx and clear interrupts */
+ status = hw->mac.ops.stop_adapter(hw);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* flush pending Tx transactions */
+ ixgbe_clear_tx_pending(hw);
+
+ /* PHY ops must be identified and initialized prior to reset */
+
+ /* Identify PHY and related function pointers */
+ status = hw->phy.ops.init(hw);
+
+ if (status == IXGBE_ERR_SFP_NOT_SUPPORTED)
+ return status;
+
+ /* start the external PHY */
+ if (hw->phy.type == ixgbe_phy_x550em_ext_t) {
+ status = ixgbe_init_ext_t_x550em(hw);
+ if (status)
+ return status;
+ }
+
+ /* Setup SFP module if there is one present. */
+ if (hw->phy.sfp_setup_needed) {
+ status = hw->mac.ops.setup_sfp(hw);
+ hw->phy.sfp_setup_needed = FALSE;
+ }
+
+ if (status == IXGBE_ERR_SFP_NOT_SUPPORTED)
+ return status;
+
+ /* Reset PHY */
+ if (!hw->phy.reset_disable && hw->phy.ops.reset)
+ hw->phy.ops.reset(hw);
+
+mac_reset_top:
+ /* Issue global reset to the MAC. Needs to be SW reset if link is up.
+ * If link reset is used when link is up, it might reset the PHY when
+ * mng is using it. If link is down or the flag to force full link
+ * reset is set, then perform link reset.
+ */
+ ctrl = IXGBE_CTRL_LNK_RST;
+ if (!hw->force_full_reset) {
+ hw->mac.ops.check_link(hw, &link_speed, &link_up, FALSE);
+ if (link_up)
+ ctrl = IXGBE_CTRL_RST;
+ }
+
+ ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL);
+ IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl);
+ IXGBE_WRITE_FLUSH(hw);
+
+ /* Poll for reset bit to self-clear meaning reset is complete */
+ for (i = 0; i < 10; i++) {
+ usec_delay(1);
+ ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
+ if (!(ctrl & IXGBE_CTRL_RST_MASK))
+ break;
+ }
+
+ if (ctrl & IXGBE_CTRL_RST_MASK) {
+ status = IXGBE_ERR_RESET_FAILED;
+ DEBUGOUT("Reset polling failed to complete.\n");
+ }
+
+ msec_delay(50);
+
+ /* Double resets are required for recovery from certain error
+ * conditions. Between resets, it is necessary to stall to
+ * allow time for any pending HW events to complete.
+ */
+ if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) {
+ hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
+ goto mac_reset_top;
+ }
+
+ /* Store the permanent mac address */
+ hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
+
+ /* Store MAC address from RAR0, clear receive address registers, and
+ * clear the multicast table. Also reset num_rar_entries to 128,
+ * since we modify this value when programming the SAN MAC address.
+ */
+ hw->mac.num_rar_entries = 128;
+ hw->mac.ops.init_rx_addrs(hw);
+
+ if (hw->device_id == IXGBE_DEV_ID_X550EM_X_10G_T) {
+ /* Config MDIO clock speed. */
+ hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0);
+ hlreg0 &= ~IXGBE_HLREG0_MDCSPD;
+ IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0);
+ }
+
+ if (hw->device_id == IXGBE_DEV_ID_X550EM_X_SFP)
+ ixgbe_setup_mux_ctl(hw);
+
+ return status;
+}
+
+/**
+ * ixgbe_init_ext_t_x550em - Start (unstall) the external Base T PHY.
+ * @hw: pointer to hardware structure
+ */
+s32 ixgbe_init_ext_t_x550em(struct ixgbe_hw *hw)
+{
+ u32 status;
+ u16 reg;
+
+ status = hw->phy.ops.read_reg(hw,
+ IXGBE_MDIO_TX_VENDOR_ALARMS_3,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+ ®);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* If PHY FW reset completed bit is set then this is the first
+ * SW instance after a power on so the PHY FW must be un-stalled.
+ */
+ if (reg & IXGBE_MDIO_TX_VENDOR_ALARMS_3_RST_MASK) {
+ status = hw->phy.ops.read_reg(hw,
+ IXGBE_MDIO_GLOBAL_RES_PR_10,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+ ®);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ reg &= ~IXGBE_MDIO_POWER_UP_STALL;
+
+ status = hw->phy.ops.write_reg(hw,
+ IXGBE_MDIO_GLOBAL_RES_PR_10,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+ reg);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_setup_kr_x550em - Configure the KR PHY.
+ * @hw: pointer to hardware structure
+ *
+ * Configures the integrated KR PHY.
+ **/
+s32 ixgbe_setup_kr_x550em(struct ixgbe_hw *hw)
+{
+ return ixgbe_setup_kr_speed_x550em(hw, hw->phy.autoneg_advertised);
+}
+
+/**
+ * ixgbe_setup_kx4_x550em - Configure the KX4 PHY.
+ * @hw: pointer to hardware structure
+ *
+ * Configures the integrated KX4 PHY.
+ **/
+s32 ixgbe_setup_kx4_x550em(struct ixgbe_hw *hw)
+{
+ s32 status;
+ u32 reg_val;
+
+ status = ixgbe_read_iosf_sb_reg_x550(hw, IXGBE_KX4_LINK_CNTL_1,
+ IXGBE_SB_IOSF_TARGET_KX4_PCS, ®_val);
+ if (status)
+ return status;
+
+ reg_val &= ~(IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX4 |
+ IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX);
+
+ reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_ENABLE;
+
+ /* Advertise 10G support. */
+ if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL)
+ reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX4;
+
+ /* Advertise 1G support. */
+ if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL)
+ reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX;
+
+ /* Restart auto-negotiation. */
+ reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_RESTART;
+ status = ixgbe_write_iosf_sb_reg_x550(hw, IXGBE_KX4_LINK_CNTL_1,
+ IXGBE_SB_IOSF_TARGET_KX4_PCS, reg_val);
+
+ return status;
+}
+
+/**
+ * ixgbe_setup_mac_link_sfp_x550em - Setup internal/external the PHY for SFP
+ * @hw: pointer to hardware structure
+ *
+ * Configure the external PHY and the integrated KR PHY for SFP support.
+ **/
+s32 ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg_wait_to_complete)
+{
+ s32 ret_val;
+ u16 reg_slice, reg_val;
+ bool setup_linear = FALSE;
+ UNREFERENCED_1PARAMETER(autoneg_wait_to_complete);
+
+ /* Check if SFP module is supported and linear */
+ ret_val = ixgbe_supported_sfp_modules_X550em(hw, &setup_linear);
+
+ /* If no SFP module present, then return success. Return success since
+ * there is no reason to configure CS4227 and SFP not present error is
+ * not excepted in the setup MAC link flow.
+ */
+ if (ret_val == IXGBE_ERR_SFP_NOT_PRESENT)
+ return IXGBE_SUCCESS;
+
+ if (ret_val != IXGBE_SUCCESS)
+ return ret_val;
+
+ /* Configure CS4227 for LINE connection rate then type. */
+ reg_slice = IXGBE_CS4227_LINE_SPARE22_MSB + (hw->bus.lan_id << 12);
+ reg_val = (speed & IXGBE_LINK_SPEED_10GB_FULL) ? 0 : 0x8000;
+ ret_val = ixgbe_write_i2c_combined(hw, IXGBE_CS4227, reg_slice,
+ reg_val);
+
+ reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB + (hw->bus.lan_id << 12);
+ if (setup_linear)
+ reg_val = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1;
+ else
+ reg_val = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1;
+ ret_val = ixgbe_write_i2c_combined(hw, IXGBE_CS4227, reg_slice,
+ reg_val);
+
+ /* Configure CS4227 for HOST connection rate then type. */
+ reg_slice = IXGBE_CS4227_HOST_SPARE22_MSB + (hw->bus.lan_id << 12);
+ reg_val = (speed & IXGBE_LINK_SPEED_10GB_FULL) ? 0 : 0x8000;
+ ret_val = ixgbe_write_i2c_combined(hw, IXGBE_CS4227, reg_slice,
+ reg_val);
+
+ reg_slice = IXGBE_CS4227_HOST_SPARE24_LSB + (hw->bus.lan_id << 12);
+ if (setup_linear)
+ reg_val = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1;
+ else
+ reg_val = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1;
+ ret_val = ixgbe_write_i2c_combined(hw, IXGBE_CS4227, reg_slice,
+ reg_val);
+
+ /* If internal link mode is XFI, then setup XFI internal link. */
+ if (!(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE))
+ ret_val = ixgbe_setup_ixfi_x550em(hw, &speed);
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_setup_ixfi_x550em - Configure the KR PHY for iXFI mode.
+ * @hw: pointer to hardware structure
+ * @speed: the link speed to force
+ *
+ * Configures the integrated KR PHY to use iXFI mode. Used to connect an
+ * internal and external PHY at a specific speed, without autonegotiation.
+ **/
+static s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed)
+{
+ s32 status;
+ u32 reg_val;
+
+ /* Disable AN and force speed to 10G Serial. */
+ status = ixgbe_read_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE;
+ reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK;
+
+ /* Select forced link speed for internal PHY. */
+ switch (*speed) {
+ case IXGBE_LINK_SPEED_10GB_FULL:
+ reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_10G;
+ break;
+ case IXGBE_LINK_SPEED_1GB_FULL:
+ reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G;
+ break;
+ default:
+ /* Other link speeds are not supported by internal KR PHY. */
+ return IXGBE_ERR_LINK_SETUP;
+ }
+
+ status = ixgbe_write_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* Disable training protocol FSM. */
+ status = ixgbe_read_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ reg_val |= IXGBE_KRM_RX_TRN_LINKUP_CTRL_CONV_WO_PROTOCOL;
+ status = ixgbe_write_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* Disable Flex from training TXFFE. */
+ status = ixgbe_read_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_DSP_TXFFE_STATE_4(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_C0_EN;
+ reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN;
+ reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN;
+ status = ixgbe_write_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_DSP_TXFFE_STATE_4(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ status = ixgbe_read_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_DSP_TXFFE_STATE_5(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_C0_EN;
+ reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN;
+ reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN;
+ status = ixgbe_write_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_DSP_TXFFE_STATE_5(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* Enable override for coefficients. */
+ status = ixgbe_read_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_TX_COEFF_CTRL_1(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_OVRRD_EN;
+ reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CZERO_EN;
+ reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CPLUS1_OVRRD_EN;
+ reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CMINUS1_OVRRD_EN;
+ status = ixgbe_write_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_TX_COEFF_CTRL_1(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* Toggle port SW reset by AN reset. */
+ status = ixgbe_read_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART;
+ status = ixgbe_write_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+
+ return status;
+}
+
+/**
+ * ixgbe_ext_phy_t_x550em_get_link - Get ext phy link status
+ * @hw: address of hardware structure
+ * @link_up: address of boolean to indicate link status
+ *
+ * Returns error code if unable to get link status.
+ */
+static s32 ixgbe_ext_phy_t_x550em_get_link(struct ixgbe_hw *hw, bool *link_up)
+{
+ u32 ret;
+ u16 autoneg_status;
+
+ *link_up = FALSE;
+
+ /* read this twice back to back to indicate current status */
+ ret = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &autoneg_status);
+ if (ret != IXGBE_SUCCESS)
+ return ret;
+
+ ret = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &autoneg_status);
+ if (ret != IXGBE_SUCCESS)
+ return ret;
+
+ *link_up = !!(autoneg_status & IXGBE_MDIO_AUTO_NEG_LINK_STATUS);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_setup_internal_phy_t_x550em - Configure KR PHY to X557 link
+ * @hw: point to hardware structure
+ *
+ * Configures the link between the integrated KR PHY and the external X557 PHY
+ * The driver will call this function when it gets a link status change
+ * interrupt from the X557 PHY. This function configures the link speed
+ * between the PHYs to match the link speed of the BASE-T link.
+ *
+ * A return of a non-zero value indicates an error, and the base driver should
+ * not report link up.
+ */
+s32 ixgbe_setup_internal_phy_t_x550em(struct ixgbe_hw *hw)
+{
+ ixgbe_link_speed force_speed;
+ bool link_up;
+ u32 status;
+ u16 speed;
+
+ if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper)
+ return IXGBE_ERR_CONFIG;
+
+ /* If link is not up, then there is no setup necessary so return */
+ status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ if (!link_up)
+ return IXGBE_SUCCESS;
+
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_STAT,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &speed);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* If link is not still up, then no setup is necessary so return */
+ status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ if (!link_up)
+ return IXGBE_SUCCESS;
+
+ /* clear everything but the speed and duplex bits */
+ speed &= IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_MASK;
+
+ switch (speed) {
+ case IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB_FULL:
+ force_speed = IXGBE_LINK_SPEED_10GB_FULL;
+ break;
+ case IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB_FULL:
+ force_speed = IXGBE_LINK_SPEED_1GB_FULL;
+ break;
+ default:
+ /* Internal PHY does not support anything else */
+ return IXGBE_ERR_INVALID_LINK_SETTINGS;
+ }
+
+ return ixgbe_setup_ixfi_x550em(hw, &force_speed);
+}
+
+/**
+ * ixgbe_setup_phy_loopback_x550em - Configure the KR PHY for loopback.
+ * @hw: pointer to hardware structure
+ *
+ * Configures the integrated KR PHY to use internal loopback mode.
+ **/
+s32 ixgbe_setup_phy_loopback_x550em(struct ixgbe_hw *hw)
+{
+ s32 status;
+ u32 reg_val;
+
+ /* Disable AN and force speed to 10G Serial. */
+ status = ixgbe_read_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE;
+ reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK;
+ reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_10G;
+ status = ixgbe_write_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* Set near-end loopback clocks. */
+ status = ixgbe_read_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_PORT_CAR_GEN_CTRL(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ reg_val |= IXGBE_KRM_PORT_CAR_GEN_CTRL_NELB_32B;
+ reg_val |= IXGBE_KRM_PORT_CAR_GEN_CTRL_NELB_KRPCS;
+ status = ixgbe_write_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_PORT_CAR_GEN_CTRL(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* Set loopback enable. */
+ status = ixgbe_read_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_PMD_DFX_BURNIN(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ reg_val |= IXGBE_KRM_PMD_DFX_BURNIN_TX_RX_KR_LB_MASK;
+ status = ixgbe_write_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_PMD_DFX_BURNIN(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* Training bypass. */
+ status = ixgbe_read_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ reg_val |= IXGBE_KRM_RX_TRN_LINKUP_CTRL_PROTOCOL_BYPASS;
+ status = ixgbe_write_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+
+ return status;
+}
+
+/**
+ * ixgbe_read_ee_hostif_X550 - Read EEPROM word using a host interface command
+ * assuming that the semaphore is already obtained.
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to read
+ * @data: word read from the EEPROM
+ *
+ * Reads a 16 bit word from the EEPROM using the hostif.
+ **/
+s32 ixgbe_read_ee_hostif_data_X550(struct ixgbe_hw *hw, u16 offset,
+ u16 *data)
+{
+ s32 status;
+ struct ixgbe_hic_read_shadow_ram buffer;
+
+ DEBUGFUNC("ixgbe_read_ee_hostif_data_X550");
+ buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD;
+ buffer.hdr.req.buf_lenh = 0;
+ buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN;
+ buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM;
+
+ /* convert offset from words to bytes */
+ buffer.address = IXGBE_CPU_TO_BE32(offset * 2);
+ /* one word */
+ buffer.length = IXGBE_CPU_TO_BE16(sizeof(u16));
+
+ status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
+ sizeof(buffer),
+ IXGBE_HI_COMMAND_TIMEOUT, FALSE);
+
+ if (status)
+ return status;
+
+ *data = (u16)IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG,
+ FW_NVM_DATA_OFFSET);
+
+ return 0;
+}
+
+/**
+ * ixgbe_read_ee_hostif_X550 - Read EEPROM word using a host interface command
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to read
+ * @data: word read from the EEPROM
+ *
+ * Reads a 16 bit word from the EEPROM using the hostif.
+ **/
+s32 ixgbe_read_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset,
+ u16 *data)
+{
+ s32 status = IXGBE_SUCCESS;
+
+ DEBUGFUNC("ixgbe_read_ee_hostif_X550");
+
+ if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) ==
+ IXGBE_SUCCESS) {
+ status = ixgbe_read_ee_hostif_data_X550(hw, offset, data);
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+ } else {
+ status = IXGBE_ERR_SWFW_SYNC;
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_read_ee_hostif_buffer_X550- Read EEPROM word(s) using hostif
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to read
+ * @words: number of words
+ * @data: word(s) read from the EEPROM
+ *
+ * Reads a 16 bit word(s) from the EEPROM using the hostif.
+ **/
+s32 ixgbe_read_ee_hostif_buffer_X550(struct ixgbe_hw *hw,
+ u16 offset, u16 words, u16 *data)
+{
+ struct ixgbe_hic_read_shadow_ram buffer;
+ u32 current_word = 0;
+ u16 words_to_read;
+ s32 status;
+ u32 i;
+
+ DEBUGFUNC("ixgbe_read_ee_hostif_buffer_X550");
+
+ /* Take semaphore for the entire operation. */
+ status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+ if (status) {
+ DEBUGOUT("EEPROM read buffer - semaphore failed\n");
+ return status;
+ }
+ while (words) {
+ if (words > FW_MAX_READ_BUFFER_SIZE / 2)
+ words_to_read = FW_MAX_READ_BUFFER_SIZE / 2;
+ else
+ words_to_read = words;
+
+ buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD;
+ buffer.hdr.req.buf_lenh = 0;
+ buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN;
+ buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM;
+
+ /* convert offset from words to bytes */
+ buffer.address = IXGBE_CPU_TO_BE32((offset + current_word) * 2);
+ buffer.length = IXGBE_CPU_TO_BE16(words_to_read * 2);
+
+ status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
+ sizeof(buffer),
+ IXGBE_HI_COMMAND_TIMEOUT,
+ FALSE);
+
+ if (status) {
+ DEBUGOUT("Host interface command failed\n");
+ goto out;
+ }
+
+ for (i = 0; i < words_to_read; i++) {
+ u32 reg = IXGBE_FLEX_MNG + (FW_NVM_DATA_OFFSET << 2) +
+ 2 * i;
+ u32 value = IXGBE_READ_REG(hw, reg);
+
+ data[current_word] = (u16)(value & 0xffff);
+ current_word++;
+ i++;
+ if (i < words_to_read) {
+ value >>= 16;
+ data[current_word] = (u16)(value & 0xffff);
+ current_word++;
+ }
+ }
+ words -= words_to_read;
+ }
+
+out:
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+ return status;
+}
+
+/**
+ * ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to write
+ * @data: word write to the EEPROM
+ *
+ * Write a 16 bit word to the EEPROM using the hostif.
+ **/
+s32 ixgbe_write_ee_hostif_data_X550(struct ixgbe_hw *hw, u16 offset,
+ u16 data)
+{
+ s32 status;
+ struct ixgbe_hic_write_shadow_ram buffer;
+
+ DEBUGFUNC("ixgbe_write_ee_hostif_data_X550");
+
+ buffer.hdr.req.cmd = FW_WRITE_SHADOW_RAM_CMD;
+ buffer.hdr.req.buf_lenh = 0;
+ buffer.hdr.req.buf_lenl = FW_WRITE_SHADOW_RAM_LEN;
+ buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM;
+
+ /* one word */
+ buffer.length = IXGBE_CPU_TO_BE16(sizeof(u16));
+ buffer.data = data;
+ buffer.address = IXGBE_CPU_TO_BE32(offset * 2);
+
+ status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
+ sizeof(buffer),
+ IXGBE_HI_COMMAND_TIMEOUT, FALSE);
+
+ return status;
+}
+
+/**
+ * ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to write
+ * @data: word write to the EEPROM
+ *
+ * Write a 16 bit word to the EEPROM using the hostif.
+ **/
+s32 ixgbe_write_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset,
+ u16 data)
+{
+ s32 status = IXGBE_SUCCESS;
+
+ DEBUGFUNC("ixgbe_write_ee_hostif_X550");
+
+ if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) ==
+ IXGBE_SUCCESS) {
+ status = ixgbe_write_ee_hostif_data_X550(hw, offset, data);
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+ } else {
+ DEBUGOUT("write ee hostif failed to get semaphore");
+ status = IXGBE_ERR_SWFW_SYNC;
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_write_ee_hostif_buffer_X550 - Write EEPROM word(s) using hostif
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to write
+ * @words: number of words
+ * @data: word(s) write to the EEPROM
+ *
+ * Write a 16 bit word(s) to the EEPROM using the hostif.
+ **/
+s32 ixgbe_write_ee_hostif_buffer_X550(struct ixgbe_hw *hw,
+ u16 offset, u16 words, u16 *data)
+{
+ s32 status = IXGBE_SUCCESS;
+ u32 i = 0;
+
+ DEBUGFUNC("ixgbe_write_ee_hostif_buffer_X550");
+
+ /* Take semaphore for the entire operation. */
+ status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+ if (status != IXGBE_SUCCESS) {
+ DEBUGOUT("EEPROM write buffer - semaphore failed\n");
+ goto out;
+ }
+
+ for (i = 0; i < words; i++) {
+ status = ixgbe_write_ee_hostif_data_X550(hw, offset + i,
+ data[i]);
+
+ if (status != IXGBE_SUCCESS) {
+ DEBUGOUT("Eeprom buffered write failed\n");
+ break;
+ }
+ }
+
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+out:
+
+ return status;
+}
+
+/**
+ * ixgbe_checksum_ptr_x550 - Checksum one pointer region
+ * @hw: pointer to hardware structure
+ * @ptr: pointer offset in eeprom
+ * @size: size of section pointed by ptr, if 0 first word will be used as size
+ * @csum: address of checksum to update
+ *
+ * Returns error status for any failure
+ */
+static s32 ixgbe_checksum_ptr_x550(struct ixgbe_hw *hw, u16 ptr,
+ u16 size, u16 *csum, u16 *buffer,
+ u32 buffer_size)
+{
+ u16 buf[256];
+ s32 status;
+ u16 length, bufsz, i, start;
+ u16 *local_buffer;
+
+ bufsz = sizeof(buf) / sizeof(buf[0]);
+
+ /* Read a chunk at the pointer location */
+ if (!buffer) {
+ status = ixgbe_read_ee_hostif_buffer_X550(hw, ptr, bufsz, buf);
+ if (status) {
+ DEBUGOUT("Failed to read EEPROM image\n");
+ return status;
+ }
+ local_buffer = buf;
+ } else {
+ if (buffer_size < ptr)
+ return IXGBE_ERR_PARAM;
+ local_buffer = &buffer[ptr];
+ }
+
+ if (size) {
+ start = 0;
+ length = size;
+ } else {
+ start = 1;
+ length = local_buffer[0];
+
+ /* Skip pointer section if length is invalid. */
+ if (length == 0xFFFF || length == 0 ||
+ (ptr + length) >= hw->eeprom.word_size)
+ return IXGBE_SUCCESS;
+ }
+
+ if (buffer && ((u32)start + (u32)length > buffer_size))
+ return IXGBE_ERR_PARAM;
+
+ for (i = start; length; i++, length--) {
+ if (i == bufsz && !buffer) {
+ ptr += bufsz;
+ i = 0;
+ if (length < bufsz)
+ bufsz = length;
+
+ /* Read a chunk at the pointer location */
+ status = ixgbe_read_ee_hostif_buffer_X550(hw, ptr,
+ bufsz, buf);
+ if (status) {
+ DEBUGOUT("Failed to read EEPROM image\n");
+ return status;
+ }
+ }
+ *csum += local_buffer[i];
+ }
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_calc_checksum_X550 - Calculates and returns the checksum
+ * @hw: pointer to hardware structure
+ * @buffer: pointer to buffer containing calculated checksum
+ * @buffer_size: size of buffer
+ *
+ * Returns a negative error code on error, or the 16-bit checksum
+ **/
+s32 ixgbe_calc_checksum_X550(struct ixgbe_hw *hw, u16 *buffer, u32 buffer_size)
+{
+ u16 eeprom_ptrs[IXGBE_EEPROM_LAST_WORD + 1];
+ u16 *local_buffer;
+ s32 status;
+ u16 checksum = 0;
+ u16 pointer, i, size;
+
+ DEBUGFUNC("ixgbe_calc_eeprom_checksum_X550");
+
+ hw->eeprom.ops.init_params(hw);
+
+ if (!buffer) {
+ /* Read pointer area */
+ status = ixgbe_read_ee_hostif_buffer_X550(hw, 0,
+ IXGBE_EEPROM_LAST_WORD + 1,
+ eeprom_ptrs);
+ if (status) {
+ DEBUGOUT("Failed to read EEPROM image\n");
+ return status;
+ }
+ local_buffer = eeprom_ptrs;
+ } else {
+ if (buffer_size < IXGBE_EEPROM_LAST_WORD)
+ return IXGBE_ERR_PARAM;
+ local_buffer = buffer;
+ }
+
+ /*
+ * For X550 hardware include 0x0-0x41 in the checksum, skip the
+ * checksum word itself
+ */
+ for (i = 0; i <= IXGBE_EEPROM_LAST_WORD; i++)
+ if (i != IXGBE_EEPROM_CHECKSUM)
+ checksum += local_buffer[i];
+
+ /*
+ * Include all data from pointers 0x3, 0x6-0xE. This excludes the
+ * FW, PHY module, and PCIe Expansion/Option ROM pointers.
+ */
+ for (i = IXGBE_PCIE_ANALOG_PTR_X550; i < IXGBE_FW_PTR; i++) {
+ if (i == IXGBE_PHY_PTR || i == IXGBE_OPTION_ROM_PTR)
+ continue;
+
+ pointer = local_buffer[i];
+
+ /* Skip pointer section if the pointer is invalid. */
+ if (pointer == 0xFFFF || pointer == 0 ||
+ pointer >= hw->eeprom.word_size)
+ continue;
+
+ switch (i) {
+ case IXGBE_PCIE_GENERAL_PTR:
+ size = IXGBE_IXGBE_PCIE_GENERAL_SIZE;
+ break;
+ case IXGBE_PCIE_CONFIG0_PTR:
+ case IXGBE_PCIE_CONFIG1_PTR:
+ size = IXGBE_PCIE_CONFIG_SIZE;
+ break;
+ default:
+ size = 0;
+ break;
+ }
+
+ status = ixgbe_checksum_ptr_x550(hw, pointer, size, &checksum,
+ buffer, buffer_size);
+ if (status)
+ return status;
+ }
+
+ checksum = (u16)IXGBE_EEPROM_SUM - checksum;
+
+ return (s32)checksum;
+}
+
+/**
+ * ixgbe_calc_eeprom_checksum_X550 - Calculates and returns the checksum
+ * @hw: pointer to hardware structure
+ *
+ * Returns a negative error code on error, or the 16-bit checksum
+ **/
+s32 ixgbe_calc_eeprom_checksum_X550(struct ixgbe_hw *hw)
+{
+ return ixgbe_calc_checksum_X550(hw, NULL, 0);
+}
+
+/**
+ * ixgbe_validate_eeprom_checksum_X550 - Validate EEPROM checksum
+ * @hw: pointer to hardware structure
+ * @checksum_val: calculated checksum
+ *
+ * Performs checksum calculation and validates the EEPROM checksum. If the
+ * caller does not need checksum_val, the value can be NULL.
+ **/
+s32 ixgbe_validate_eeprom_checksum_X550(struct ixgbe_hw *hw, u16 *checksum_val)
+{
+ s32 status;
+ u16 checksum;
+ u16 read_checksum = 0;
+
+ DEBUGFUNC("ixgbe_validate_eeprom_checksum_X550");
+
+ /* Read the first word from the EEPROM. If this times out or fails, do
+ * not continue or we could be in for a very long wait while every
+ * EEPROM read fails
+ */
+ status = hw->eeprom.ops.read(hw, 0, &checksum);
+ if (status) {
+ DEBUGOUT("EEPROM read failed\n");
+ return status;
+ }
+
+ status = hw->eeprom.ops.calc_checksum(hw);
+ if (status < 0)
+ return status;
+
+ checksum = (u16)(status & 0xffff);
+
+ status = ixgbe_read_ee_hostif_X550(hw, IXGBE_EEPROM_CHECKSUM,
+ &read_checksum);
+ if (status)
+ return status;
+
+ /* Verify read checksum from EEPROM is the same as
+ * calculated checksum
+ */
+ if (read_checksum != checksum) {
+ status = IXGBE_ERR_EEPROM_CHECKSUM;
+ ERROR_REPORT1(IXGBE_ERROR_INVALID_STATE,
+ "Invalid EEPROM checksum");
+ }
+
+ /* If the user cares, return the calculated checksum */
+ if (checksum_val)
+ *checksum_val = checksum;
+
+ return status;
+}
+
+/**
+ * ixgbe_update_eeprom_checksum_X550 - Updates the EEPROM checksum and flash
+ * @hw: pointer to hardware structure
+ *
+ * After writing EEPROM to shadow RAM using EEWR register, software calculates
+ * checksum and updates the EEPROM and instructs the hardware to update
+ * the flash.
+ **/
+s32 ixgbe_update_eeprom_checksum_X550(struct ixgbe_hw *hw)
+{
+ s32 status;
+ u16 checksum = 0;
+
+ DEBUGFUNC("ixgbe_update_eeprom_checksum_X550");
+
+ /* Read the first word from the EEPROM. If this times out or fails, do
+ * not continue or we could be in for a very long wait while every
+ * EEPROM read fails
+ */
+ status = ixgbe_read_ee_hostif_X550(hw, 0, &checksum);
+ if (status) {
+ DEBUGOUT("EEPROM read failed\n");
+ return status;
+ }
+
+ status = ixgbe_calc_eeprom_checksum_X550(hw);
+ if (status < 0)
+ return status;
+
+ checksum = (u16)(status & 0xffff);
+
+ status = ixgbe_write_ee_hostif_X550(hw, IXGBE_EEPROM_CHECKSUM,
+ checksum);
+ if (status)
+ return status;
+
+ status = ixgbe_update_flash_X550(hw);
+
+ return status;
+}
+
+/**
+ * ixgbe_update_flash_X550 - Instruct HW to copy EEPROM to Flash device
+ * @hw: pointer to hardware structure
+ *
+ * Issue a shadow RAM dump to FW to copy EEPROM from shadow RAM to the flash.
+ **/
+s32 ixgbe_update_flash_X550(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_SUCCESS;
+ union ixgbe_hic_hdr2 buffer;
+
+ DEBUGFUNC("ixgbe_update_flash_X550");
+
+ buffer.req.cmd = FW_SHADOW_RAM_DUMP_CMD;
+ buffer.req.buf_lenh = 0;
+ buffer.req.buf_lenl = FW_SHADOW_RAM_DUMP_LEN;
+ buffer.req.checksum = FW_DEFAULT_CHECKSUM;
+
+ status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
+ sizeof(buffer),
+ IXGBE_HI_COMMAND_TIMEOUT, FALSE);
+
+ return status;
+}
+
+/**
+ * ixgbe_get_supported_physical_layer_X550em - Returns physical layer type
+ * @hw: pointer to hardware structure
+ *
+ * Determines physical layer capabilities of the current configuration.
+ **/
+u32 ixgbe_get_supported_physical_layer_X550em(struct ixgbe_hw *hw)
+{
+ u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+ u16 ext_ability = 0;
+
+ DEBUGFUNC("ixgbe_get_supported_physical_layer_X550em");
+
+ hw->phy.ops.identify(hw);
+
+ switch (hw->phy.type) {
+ case ixgbe_phy_x550em_kr:
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KR |
+ IXGBE_PHYSICAL_LAYER_1000BASE_KX;
+ break;
+ case ixgbe_phy_x550em_kx4:
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4 |
+ IXGBE_PHYSICAL_LAYER_1000BASE_KX;
+ break;
+ case ixgbe_phy_x550em_ext_t:
+ hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_EXT_ABILITY,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+ &ext_ability);
+ if (ext_ability & IXGBE_MDIO_PHY_10GBASET_ABILITY)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T;
+ if (ext_ability & IXGBE_MDIO_PHY_1000BASET_ABILITY)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T;
+ break;
+ default:
+ break;
+ }
+
+ if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber)
+ physical_layer = ixgbe_get_supported_phy_sfp_layer_generic(hw);
+
+ return physical_layer;
+}
+
+/**
+ * ixgbe_get_bus_info_x550em - Set PCI bus info
+ * @hw: pointer to hardware structure
+ *
+ * Sets bus link width and speed to unknown because X550em is
+ * not a PCI device.
+ **/
+s32 ixgbe_get_bus_info_X550em(struct ixgbe_hw *hw)
+{
+
+ DEBUGFUNC("ixgbe_get_bus_info_x550em");
+
+ hw->bus.width = ixgbe_bus_width_unknown;
+ hw->bus.speed = ixgbe_bus_speed_unknown;
+
+ hw->mac.ops.set_lan_id(hw);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_disable_rx_x550 - Disable RX unit
+ *
+ * Enables the Rx DMA unit for x550
+ **/
+void ixgbe_disable_rx_x550(struct ixgbe_hw *hw)
+{
+ u32 rxctrl, pfdtxgswc;
+ s32 status;
+ struct ixgbe_hic_disable_rxen fw_cmd;
+
+ DEBUGFUNC("ixgbe_enable_rx_dma_x550");
+
+ rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
+ if (rxctrl & IXGBE_RXCTRL_RXEN) {
+ pfdtxgswc = IXGBE_READ_REG(hw, IXGBE_PFDTXGSWC);
+ if (pfdtxgswc & IXGBE_PFDTXGSWC_VT_LBEN) {
+ pfdtxgswc &= ~IXGBE_PFDTXGSWC_VT_LBEN;
+ IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, pfdtxgswc);
+ hw->mac.set_lben = TRUE;
+ } else {
+ hw->mac.set_lben = FALSE;
+ }
+
+ fw_cmd.hdr.cmd = FW_DISABLE_RXEN_CMD;
+ fw_cmd.hdr.buf_len = FW_DISABLE_RXEN_LEN;
+ fw_cmd.hdr.checksum = FW_DEFAULT_CHECKSUM;
+ fw_cmd.port_number = (u8)hw->bus.lan_id;
+
+ status = ixgbe_host_interface_command(hw, (u32 *)&fw_cmd,
+ sizeof(struct ixgbe_hic_disable_rxen),
+ IXGBE_HI_COMMAND_TIMEOUT, TRUE);
+
+ /* If we fail - disable RX using register write */
+ if (status) {
+ rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
+ if (rxctrl & IXGBE_RXCTRL_RXEN) {
+ rxctrl &= ~IXGBE_RXCTRL_RXEN;
+ IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl);
+ }
+ }
+ }
+}
+
+/**
+ * ixgbe_enter_lplu_x550em - Transition to low power states
+ * @hw: pointer to hardware structure
+ *
+ * Configures Low Power Link Up on transition to low power states
+ * (from D0 to non-D0). Link is required to enter LPLU so avoid resetting the
+ * X557 PHY immediately prior to entering LPLU.
+ **/
+s32 ixgbe_enter_lplu_t_x550em(struct ixgbe_hw *hw)
+{
+ u16 an_10g_cntl_reg, autoneg_reg, speed;
+ s32 status;
+ ixgbe_link_speed lcd_speed;
+ u32 save_autoneg;
+ bool link_up;
+
+ /* If blocked by MNG FW, then don't restart AN */
+ if (ixgbe_check_reset_blocked(hw))
+ return IXGBE_SUCCESS;
+
+ status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ status = ixgbe_read_eeprom(hw, NVM_INIT_CTRL_3, &hw->eeprom.ctrl_word_3);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* If link is down, LPLU disabled in NVM, WoL disabled, or manageability
+ * disabled, then force link down by entering low power mode.
+ */
+ if (!link_up || !(hw->eeprom.ctrl_word_3 & NVM_INIT_CTRL_3_LPLU) ||
+ !(hw->wol_enabled || ixgbe_mng_present(hw)))
+ return ixgbe_set_copper_phy_power(hw, FALSE);
+
+ /* Determine LCD */
+ status = ixgbe_get_lcd_t_x550em(hw, &lcd_speed);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* If no valid LCD link speed, then force link down and exit. */
+ if (lcd_speed == IXGBE_LINK_SPEED_UNKNOWN)
+ return ixgbe_set_copper_phy_power(hw, FALSE);
+
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_STAT,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &speed);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* If no link now, speed is invalid so take link down */
+ status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up);
+ if (status != IXGBE_SUCCESS)
+ return ixgbe_set_copper_phy_power(hw, FALSE);
+
+ /* clear everything but the speed bits */
+ speed &= IXGBE_MDIO_AUTO_NEG_VEN_STAT_SPEED_MASK;
+
+ /* If current speed is already LCD, then exit. */
+ if (((speed == IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB) &&
+ (lcd_speed == IXGBE_LINK_SPEED_1GB_FULL)) ||
+ ((speed == IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB) &&
+ (lcd_speed == IXGBE_LINK_SPEED_10GB_FULL)))
+ return status;
+
+ /* Clear AN completed indication */
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &autoneg_reg);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ status = hw->phy.ops.read_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &an_10g_cntl_reg);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ status = hw->phy.ops.read_reg(hw,
+ IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &autoneg_reg);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ save_autoneg = hw->phy.autoneg_advertised;
+
+ /* Setup link at least common link speed */
+ status = hw->mac.ops.setup_link(hw, lcd_speed, FALSE);
+
+ /* restore autoneg from before setting lplu speed */
+ hw->phy.autoneg_advertised = save_autoneg;
+
+ return status;
+}
+
+/**
+ * ixgbe_get_lcd_x550em - Determine lowest common denominator
+ * @hw: pointer to hardware structure
+ * @lcd_speed: pointer to lowest common link speed
+ *
+ * Determine lowest common link speed with link partner.
+ **/
+s32 ixgbe_get_lcd_t_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *lcd_speed)
+{
+ u16 an_lp_status;
+ s32 status;
+ u16 word = hw->eeprom.ctrl_word_3;
+
+ *lcd_speed = IXGBE_LINK_SPEED_UNKNOWN;
+
+ status = hw->phy.ops.read_reg(hw, IXGBE_AUTO_NEG_LP_STATUS,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &an_lp_status);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* If link partner advertised 1G, return 1G */
+ if (an_lp_status & IXGBE_AUTO_NEG_LP_1000BASE_CAP) {
+ *lcd_speed = IXGBE_LINK_SPEED_1GB_FULL;
+ return status;
+ }
+
+ /* If 10G disabled for LPLU via NVM D10GMP, then return no valid LCD */
+ if ((hw->bus.lan_id && (word & NVM_INIT_CTRL_3_D10GMP_PORT1)) ||
+ (word & NVM_INIT_CTRL_3_D10GMP_PORT0))
+ return status;
+
+ /* Link partner not capable of lower speeds, return 10G */
+ *lcd_speed = IXGBE_LINK_SPEED_10GB_FULL;
+ return status;
+}
+
+/**
+ * ixgbe_setup_fc_X550em - Set up flow control
+ * @hw: pointer to hardware structure
+ *
+ * Called at init time to set up flow control.
+ **/
+s32 ixgbe_setup_fc_X550em(struct ixgbe_hw *hw)
+{
+ s32 ret_val = IXGBE_SUCCESS;
+ u32 pause, asm_dir, reg_val;
+
+ DEBUGFUNC("ixgbe_setup_fc_X550em");
+
+ /* Validate the requested mode */
+ if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) {
+ ERROR_REPORT1(IXGBE_ERROR_UNSUPPORTED,
+ "ixgbe_fc_rx_pause not valid in strict IEEE mode\n");
+ ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
+ goto out;
+ }
+
+ /* 10gig parts do not have a word in the EEPROM to determine the
+ * default flow control setting, so we explicitly set it to full.
+ */
+ if (hw->fc.requested_mode == ixgbe_fc_default)
+ hw->fc.requested_mode = ixgbe_fc_full;
+
+ /* Determine PAUSE and ASM_DIR bits. */
+ switch (hw->fc.requested_mode) {
+ case ixgbe_fc_none:
+ pause = 0;
+ asm_dir = 0;
+ break;
+ case ixgbe_fc_tx_pause:
+ pause = 0;
+ asm_dir = 1;
+ break;
+ case ixgbe_fc_rx_pause:
+ /* Rx Flow control is enabled and Tx Flow control is
+ * disabled by software override. Since there really
+ * isn't a way to advertise that we are capable of RX
+ * Pause ONLY, we will advertise that we support both
+ * symmetric and asymmetric Rx PAUSE, as such we fall
+ * through to the fc_full statement. Later, we will
+ * disable the adapter's ability to send PAUSE frames.
+ */
+ case ixgbe_fc_full:
+ pause = 1;
+ asm_dir = 1;
+ break;
+ default:
+ ERROR_REPORT1(IXGBE_ERROR_ARGUMENT,
+ "Flow control param set incorrectly\n");
+ ret_val = IXGBE_ERR_CONFIG;
+ goto out;
+ }
+
+ if (hw->phy.media_type == ixgbe_media_type_backplane) {
+ ret_val = ixgbe_read_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
+ if (ret_val != IXGBE_SUCCESS)
+ goto out;
+ reg_val &= ~(IXGBE_KRM_AN_CNTL_1_SYM_PAUSE |
+ IXGBE_KRM_AN_CNTL_1_ASM_PAUSE);
+ if (pause)
+ reg_val |= IXGBE_KRM_AN_CNTL_1_SYM_PAUSE;
+ if (asm_dir)
+ reg_val |= IXGBE_KRM_AN_CNTL_1_ASM_PAUSE;
+ ret_val = ixgbe_write_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+
+ /* Not all devices fully support AN. */
+ if (hw->device_id == IXGBE_DEV_ID_X550EM_X_KR)
+ hw->fc.disable_fc_autoneg = TRUE;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * ixgbe_set_mux - Set mux for port 1 access with CS4227
+ * @hw: pointer to hardware structure
+ * @state: set mux if 1, clear if 0
+ */
+static void ixgbe_set_mux(struct ixgbe_hw *hw, u8 state)
+{
+ u32 esdp;
+
+ if (!hw->bus.lan_id)
+ return;
+ esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ if (state)
+ esdp |= IXGBE_ESDP_SDP1;
+ else
+ esdp &= ~IXGBE_ESDP_SDP1;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+ IXGBE_WRITE_FLUSH(hw);
+}
+
+/**
+ * ixgbe_acquire_swfw_sync_X550em - Acquire SWFW semaphore
+ * @hw: pointer to hardware structure
+ * @mask: Mask to specify which semaphore to acquire
+ *
+ * Acquires the SWFW semaphore and sets the I2C MUX
+ **/
+s32 ixgbe_acquire_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask)
+{
+ s32 status;
+
+ DEBUGFUNC("ixgbe_acquire_swfw_sync_X550em");
+
+ status = ixgbe_acquire_swfw_sync_X540(hw, mask);
+ if (status)
+ return status;
+
+ if (mask & IXGBE_GSSR_I2C_MASK)
+ ixgbe_set_mux(hw, 1);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_release_swfw_sync_X550em - Release SWFW semaphore
+ * @hw: pointer to hardware structure
+ * @mask: Mask to specify which semaphore to release
+ *
+ * Releases the SWFW semaphore and sets the I2C MUX
+ **/
+void ixgbe_release_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask)
+{
+ DEBUGFUNC("ixgbe_release_swfw_sync_X550em");
+
+ if (mask & IXGBE_GSSR_I2C_MASK)
+ ixgbe_set_mux(hw, 0);
+
+ ixgbe_release_swfw_sync_X540(hw, mask);
+}
+
+/**
+ * ixgbe_handle_lasi_ext_t_x550em - Handle external Base T PHY interrupt
+ * @hw: pointer to hardware structure
+ *
+ * Handle external Base T PHY interrupt. If high temperature
+ * failure alarm then return error, else if link status change
+ * then setup internal/external PHY link
+ *
+ * Return IXGBE_ERR_OVERTEMP if interrupt is high temperature
+ * failure alarm, else return PHY access status.
+ */
+s32 ixgbe_handle_lasi_ext_t_x550em(struct ixgbe_hw *hw)
+{
+ bool lsc;
+ u32 status;
+
+ status = ixgbe_get_lasi_ext_t_x550em(hw, &lsc);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ if (lsc)
+ return ixgbe_setup_internal_phy(hw);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_setup_mac_link_t_X550em - Sets the auto advertised link speed
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ * @autoneg_wait_to_complete: TRUE when waiting for completion is needed
+ *
+ * Setup internal/external PHY link speed based on link speed, then set
+ * external PHY auto advertised link speed.
+ *
+ * Returns error status for any failure
+ **/
+s32 ixgbe_setup_mac_link_t_X550em(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg_wait_to_complete)
+{
+ s32 status;
+ ixgbe_link_speed force_speed;
+
+ DEBUGFUNC("ixgbe_setup_mac_link_t_X550em");
+
+ /* Setup internal/external PHY link speed to iXFI (10G), unless
+ * only 1G is auto advertised then setup KX link.
+ */
+ if (speed & IXGBE_LINK_SPEED_10GB_FULL)
+ force_speed = IXGBE_LINK_SPEED_10GB_FULL;
+ else
+ force_speed = IXGBE_LINK_SPEED_1GB_FULL;
+
+ /* If internal link mode is XFI, then setup XFI internal link. */
+ if (!(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) {
+ status = ixgbe_setup_ixfi_x550em(hw, &force_speed);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+ }
+
+ return hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait_to_complete);
+}
+
+/**
+ * ixgbe_check_link_t_X550em - Determine link and speed status
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @link_up: TRUE when link is up
+ * @link_up_wait_to_complete: bool used to wait for link up or not
+ *
+ * Check that both the MAC and X557 external PHY have link.
+ **/
+s32 ixgbe_check_link_t_X550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+ bool *link_up, bool link_up_wait_to_complete)
+{
+ u32 status;
+ u16 autoneg_status;
+
+ if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper)
+ return IXGBE_ERR_CONFIG;
+
+ status = ixgbe_check_mac_link_generic(hw, speed, link_up,
+ link_up_wait_to_complete);
+
+ /* If check link fails or MAC link is not up, then return */
+ if (status != IXGBE_SUCCESS || !(*link_up))
+ return status;
+
+ /* MAC link is up, so check external PHY link.
+ * Read this twice back to back to indicate current status.
+ */
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &autoneg_status);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &autoneg_status);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* If external PHY link is not up, then indicate link not up */
+ if (!(autoneg_status & IXGBE_MDIO_AUTO_NEG_LINK_STATUS))
+ *link_up = FALSE;
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_reset_phy_t_X550em - Performs X557 PHY reset and enables LASI
+ * @hw: pointer to hardware structure
+ **/
+s32 ixgbe_reset_phy_t_X550em(struct ixgbe_hw *hw)
+{
+ s32 status;
+
+ status = ixgbe_reset_phy_generic(hw);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* Configure Link Status Alarm and Temperature Threshold interrupts */
+ return ixgbe_enable_lasi_ext_t_x550em(hw);
+}
+
+/**
+ * ixgbe_led_on_t_X550em - Turns on the software controllable LEDs.
+ * @hw: pointer to hardware structure
+ * @led_idx: led number to turn on
+ **/
+s32 ixgbe_led_on_t_X550em(struct ixgbe_hw *hw, u32 led_idx)
+{
+ u16 phy_data;
+
+ DEBUGFUNC("ixgbe_led_on_t_X550em");
+
+ if (led_idx >= IXGBE_X557_MAX_LED_INDEX)
+ return IXGBE_ERR_PARAM;
+
+ /* To turn on the LED, set mode to ON. */
+ ixgbe_read_phy_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, &phy_data);
+ phy_data |= IXGBE_X557_LED_MANUAL_SET_MASK;
+ ixgbe_write_phy_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, phy_data);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_led_off_t_X550em - Turns off the software controllable LEDs.
+ * @hw: pointer to hardware structure
+ * @led_idx: led number to turn off
+ **/
+s32 ixgbe_led_off_t_X550em(struct ixgbe_hw *hw, u32 led_idx)
+{
+ u16 phy_data;
+
+ DEBUGFUNC("ixgbe_led_off_t_X550em");
+
+ if (led_idx >= IXGBE_X557_MAX_LED_INDEX)
+ return IXGBE_ERR_PARAM;
+
+ /* To turn on the LED, set mode to ON. */
+ ixgbe_read_phy_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, &phy_data);
+ phy_data &= ~IXGBE_X557_LED_MANUAL_SET_MASK;
+ ixgbe_write_phy_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, phy_data);
+
+ return IXGBE_SUCCESS;
+}
+
Index: src/sys/dev/pci/ixgbe/ixgbe_x550.h
diff -u /dev/null src/sys/dev/pci/ixgbe/ixgbe_x550.h:1.1
--- /dev/null Thu Dec 1 07:44:58 2016
+++ src/sys/dev/pci/ixgbe/ixgbe_x550.h Thu Dec 1 07:44:58 2016
@@ -0,0 +1,109 @@
+/******************************************************************************
+
+ Copyright (c) 2001-2015, Intel Corporation
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+
+******************************************************************************/
+/*$FreeBSD: head/sys/dev/ixgbe/ixgbe_x550.h 282289 2015-04-30 22:53:27Z erj $*/
+
+#ifndef _IXGBE_X550_H_
+#define _IXGBE_X550_H_
+
+#include "ixgbe_type.h"
+
+s32 ixgbe_dmac_config_X550(struct ixgbe_hw *hw);
+s32 ixgbe_dmac_config_tcs_X550(struct ixgbe_hw *hw);
+s32 ixgbe_dmac_update_tcs_X550(struct ixgbe_hw *hw);
+
+s32 ixgbe_get_bus_info_X550em(struct ixgbe_hw *hw);
+s32 ixgbe_init_eeprom_params_X550(struct ixgbe_hw *hw);
+s32 ixgbe_update_eeprom_checksum_X550(struct ixgbe_hw *hw);
+s32 ixgbe_calc_eeprom_checksum_X550(struct ixgbe_hw *hw);
+s32 ixgbe_calc_checksum_X550(struct ixgbe_hw *hw, u16 *buffer, u32 buffer_size);
+s32 ixgbe_validate_eeprom_checksum_X550(struct ixgbe_hw *hw, u16 *checksum_val);
+s32 ixgbe_update_flash_X550(struct ixgbe_hw *hw);
+s32 ixgbe_write_ee_hostif_buffer_X550(struct ixgbe_hw *hw,
+ u16 offset, u16 words, u16 *data);
+s32 ixgbe_write_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset,
+ u16 data);
+s32 ixgbe_read_ee_hostif_buffer_X550(struct ixgbe_hw *hw,
+ u16 offset, u16 words, u16 *data);
+s32 ixgbe_read_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset,
+u16 *data);
+s32 ixgbe_read_ee_hostif_data_X550(struct ixgbe_hw *hw, u16 offset,
+ u16 *data);
+s32 ixgbe_write_ee_hostif_data_X550(struct ixgbe_hw *hw, u16 offset,
+ u16 data);
+s32 ixgbe_set_eee_X550(struct ixgbe_hw *hw, bool enable_eee);
+s32 ixgbe_setup_eee_X550(struct ixgbe_hw *hw, bool enable_eee);
+void ixgbe_set_source_address_pruning_X550(struct ixgbe_hw *hw, bool enable,
+ unsigned int pool);
+void ixgbe_set_ethertype_anti_spoofing_X550(struct ixgbe_hw *hw,
+ bool enable, int vf);
+s32 ixgbe_write_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u32 data);
+s32 ixgbe_read_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u32 *data);
+void ixgbe_disable_mdd_X550(struct ixgbe_hw *hw);
+void ixgbe_enable_mdd_X550(struct ixgbe_hw *hw);
+void ixgbe_mdd_event_X550(struct ixgbe_hw *hw, u32 *vf_bitmap);
+void ixgbe_restore_mdd_vf_X550(struct ixgbe_hw *hw, u32 vf);
+enum ixgbe_media_type ixgbe_get_media_type_X550em(struct ixgbe_hw *hw);
+s32 ixgbe_setup_sfp_modules_X550em(struct ixgbe_hw *hw);
+s32 ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed, bool *autoneg);
+void ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw *hw);
+s32 ixgbe_reset_hw_X550em(struct ixgbe_hw *hw);
+s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw);
+s32 ixgbe_setup_kr_x550em(struct ixgbe_hw *hw);
+s32 ixgbe_setup_kx4_x550em(struct ixgbe_hw *hw);
+s32 ixgbe_init_ext_t_x550em(struct ixgbe_hw *hw);
+s32 ixgbe_setup_internal_phy_t_x550em(struct ixgbe_hw *hw);
+s32 ixgbe_setup_phy_loopback_x550em(struct ixgbe_hw *hw);
+u32 ixgbe_get_supported_physical_layer_X550em(struct ixgbe_hw *hw);
+void ixgbe_disable_rx_x550(struct ixgbe_hw *hw);
+s32 ixgbe_get_lcd_t_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *lcd_speed);
+s32 ixgbe_enter_lplu_t_x550em(struct ixgbe_hw *hw);
+s32 ixgbe_acquire_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask);
+void ixgbe_release_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask);
+s32 ixgbe_setup_fc_X550em(struct ixgbe_hw *hw);
+s32 ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg_wait_to_complete);
+s32 ixgbe_handle_lasi_ext_t_x550em(struct ixgbe_hw *hw);
+s32 ixgbe_setup_mac_link_t_X550em(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg_wait_to_complete);
+s32 ixgbe_check_link_t_X550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+ bool *link_up, bool link_up_wait_to_complete);
+s32 ixgbe_reset_phy_t_X550em(struct ixgbe_hw *hw);
+s32 ixgbe_identify_sfp_module_X550em(struct ixgbe_hw *hw);
+s32 ixgbe_led_on_t_X550em(struct ixgbe_hw *hw, u32 led_idx);
+s32 ixgbe_led_off_t_X550em(struct ixgbe_hw *hw, u32 led_idx);
+#endif /* _IXGBE_X550_H_ */
