Module Name: src
Committed By: snj
Date: Sat Jan 13 05:40:25 UTC 2018
Modified Files:
src/sys/dev/ic [netbsd-8]: cs4215reg.h
src/sys/dev/sbus [netbsd-8]: dbri.c dbrivar.h
Log Message:
Pull up following revision(s) (requested by macallan in ticket #476):
sys/dev/sbus/dbrivar.h: revision 1.15
sys/dev/ic/cs4215reg.h: revision 1.5
sys/dev/sbus/dbri.c: revision 1.37
overhaul the dbri driver and make it work again in the New Order Of Things
- fix switching between control and data mode
- make sure interrupts can happen in control mode
- implement audioif.commit_settings()
- switch to control mode only if needed - for changes in sample rate or format
but not for things like volume control
should fix PR 52786
To generate a diff of this commit:
cvs rdiff -u -r1.4 -r1.4.80.1 src/sys/dev/ic/cs4215reg.h
cvs rdiff -u -r1.35 -r1.35.22.1 src/sys/dev/sbus/dbri.c
cvs rdiff -u -r1.13 -r1.13.42.1 src/sys/dev/sbus/dbrivar.h
Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.
Modified files:
Index: src/sys/dev/ic/cs4215reg.h
diff -u src/sys/dev/ic/cs4215reg.h:1.4 src/sys/dev/ic/cs4215reg.h:1.4.80.1
--- src/sys/dev/ic/cs4215reg.h:1.4 Mon May 5 00:21:47 2008
+++ src/sys/dev/ic/cs4215reg.h Sat Jan 13 05:40:25 2018
@@ -1,4 +1,4 @@
-/* $NetBSD: cs4215reg.h,v 1.4 2008/05/05 00:21:47 jmcneill Exp $ */
+/* $NetBSD: cs4215reg.h,v 1.4.80.1 2018/01/13 05:40:25 snj Exp $ */
/*
* Copyright (c) 2001 Jared D. McNeill <jmcne...@netbsd.org>
@@ -30,7 +30,7 @@
/* time slot 1: status register */
#define CS4215_CLB (1<<2) /* control latch bit */
#define CS4215_MLB (1<<4) /* 1: mic: 20 dB gain disabled */
-#define CS4215_RSRVD_1 (1<<5)
+#define CS4215_ONE (1<<5) /* always one */
/* time slot 2: data format register */
#define CS4215_DFR_LINEAR16 0
Index: src/sys/dev/sbus/dbri.c
diff -u src/sys/dev/sbus/dbri.c:1.35 src/sys/dev/sbus/dbri.c:1.35.22.1
--- src/sys/dev/sbus/dbri.c:1.35 Sat Oct 19 21:00:32 2013
+++ src/sys/dev/sbus/dbri.c Sat Jan 13 05:40:25 2018
@@ -1,4 +1,4 @@
-/* $NetBSD: dbri.c,v 1.35 2013/10/19 21:00:32 mrg Exp $ */
+/* $NetBSD: dbri.c,v 1.35.22.1 2018/01/13 05:40:25 snj Exp $ */
/*
* Copyright (C) 1997 Rudolf Koenig (rfkoe...@immd4.informatik.uni-erlangen.de)
@@ -34,7 +34,7 @@
*/
#include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: dbri.c,v 1.35 2013/10/19 21:00:32 mrg Exp $");
+__KERNEL_RCSID(0, "$NetBSD: dbri.c,v 1.35.22.1 2018/01/13 05:40:25 snj Exp $");
#include "audio.h"
#if NAUDIO > 0
@@ -165,6 +165,7 @@ static void dbri_set_power(struct dbri_s
static void dbri_bring_up(struct dbri_softc *);
static bool dbri_suspend(device_t, const pmf_qual_t *);
static bool dbri_resume(device_t, const pmf_qual_t *);
+static int dbri_commit(void *);
/* stupid support routines */
static uint32_t reverse_bytes(uint32_t, int);
@@ -195,6 +196,7 @@ struct audio_hw_if dbri_hw_if = {
.trigger_output = dbri_trigger_output,
.trigger_input = dbri_trigger_input,
.get_locks = dbri_get_locks,
+ .commit_settings = dbri_commit,
};
CFATTACH_DECL_NEW(dbri, sizeof(struct dbri_softc),
@@ -277,6 +279,8 @@ dbri_attach_sbus(device_t parent, device
sc->sc_dmat = sa->sa_dmatag;
sc->sc_powerstate = 1;
+ sc->sc_whack_codec = 0;
+
pwr = prom_getpropint(sa->sa_node,"pwr-on-auxio",0);
aprint_normal(": rev %s\n", ver);
@@ -533,6 +537,7 @@ dbri_init(struct dbri_softc *sc)
int n;
dbri_reset(sc);
+ sc->sc_mm.status = 0;
cmd = dbri_command_lock(sc);
@@ -548,7 +553,6 @@ dbri_init(struct dbri_softc *sc)
sc->sc_dma->intr[n] = 0;
}
- /* Disable all SBus bursts */
/* XXX 16 byte bursts cause errors, the rest works */
reg = bus_space_read_4(iot, ioh, DBRI_REG0);
@@ -698,9 +702,6 @@ dbri_process_interrupt(struct dbri_softc
case DBRI_INTR_FXDT: /* fixed data change */
DPRINTF("dbri_intr: Fixed data change (%d: %x)\n", channel,
val);
-#if 0
- printf("reg: %08x\n", sc->sc_mm.status);
-#endif
if (sc->sc_pipe[channel].sdp & DBRI_SDP_MSB)
val = reverse_bytes(val, sc->sc_pipe[channel].length);
if (sc->sc_pipe[channel].prec)
@@ -859,10 +860,12 @@ mmcodec_init_data(struct dbri_softc *sc)
pipe_ts_link(sc, 20, PIPEoutput, 16, 32, sc->sc_mm.offset + 32);
pipe_ts_link(sc, 4, PIPEoutput, 16, data_width, sc->sc_mm.offset);
pipe_ts_link(sc, 6, PIPEinput, 16, data_width, sc->sc_mm.offset);
+#if 0
+ /* readback for the mixer registers - we don't use that */
pipe_ts_link(sc, 21, PIPEinput, 16, 32, sc->sc_mm.offset + 32);
- pipe_receive_fixed(sc, 21, &sc->sc_mm.status);
-
+ pipe_receive_fixed(sc, 21, &sc->sc_mm.d.ldata);
+#endif
mmcodec_setgain(sc, 0);
tmp = bus_space_read_4(iot, ioh, DBRI_REG0);
@@ -879,14 +882,13 @@ mmcodec_pipe_init(struct dbri_softc *sc)
pipe_setup(sc, 4, DBRI_SDP_MEM | DBRI_SDP_TO_SER | DBRI_SDP_MSB);
pipe_setup(sc, 20, DBRI_SDP_FIXED | DBRI_SDP_TO_SER | DBRI_SDP_MSB);
pipe_setup(sc, 6, DBRI_SDP_MEM | DBRI_SDP_FROM_SER | DBRI_SDP_MSB);
+#if 0
pipe_setup(sc, 21, DBRI_SDP_FIXED | DBRI_SDP_FROM_SER | DBRI_SDP_MSB);
-
+#endif
pipe_setup(sc, 17, DBRI_SDP_FIXED | DBRI_SDP_TO_SER | DBRI_SDP_MSB);
pipe_setup(sc, 18, DBRI_SDP_FIXED | DBRI_SDP_FROM_SER | DBRI_SDP_MSB);
pipe_setup(sc, 19, DBRI_SDP_FIXED | DBRI_SDP_FROM_SER | DBRI_SDP_MSB);
- sc->sc_mm.status = 0;
-
pipe_receive_fixed(sc, 18, &sc->sc_mm.status);
pipe_receive_fixed(sc, 19, &sc->sc_mm.version);
@@ -925,7 +927,7 @@ mmcodec_default(struct dbri_softc *sc)
* 2: serial enable, CHI master, 128 bits per frame, clock 1
* 3: tests disabled
*/
- mm->c.bcontrol[0] = CS4215_RSRVD_1 | CS4215_MLB;
+ mm->c.bcontrol[0] = CS4215_ONE | CS4215_MLB;
mm->c.bcontrol[1] = CS4215_DFR_ULAW | CS4215_FREQ[0].csval;
mm->c.bcontrol[2] = CS4215_XCLK | CS4215_BSEL_128 | CS4215_FREQ[0].xtal;
mm->c.bcontrol[3] = 0;
@@ -982,6 +984,10 @@ mmcodec_setcontrol(struct dbri_softc *sc
mmcodec_setgain(sc, 1);
delay(125);
+ tmp = bus_space_read_4(iot, ioh, DBRI_REG0);
+ tmp &= ~(DBRI_CHI_ACTIVATE); /* disable CHI */
+ bus_space_write_4(iot, ioh, DBRI_REG0, tmp);
+
bus_space_write_4(iot, ioh, DBRI_REG2, 0);
delay(125);
@@ -992,7 +998,6 @@ mmcodec_setcontrol(struct dbri_softc *sc
val |= (sc->sc_mm.onboard ? DBRI_PIO0 : DBRI_PIO2);
bus_space_write_4(iot, ioh, DBRI_REG2, val);
-
delay(34);
/*
@@ -1013,6 +1018,8 @@ mmcodec_setcontrol(struct dbri_softc *sc
pipe_ts_link(sc, 18, PIPEinput, 16, 8, sc->sc_mm.offset);
pipe_ts_link(sc, 19, PIPEinput, 16, 8, sc->sc_mm.offset + 48);
+ pipe_receive_fixed(sc, 18, &sc->sc_mm.status);
+
/* wait for the chip to echo back CLB as zero */
sc->sc_mm.c.bcontrol[0] &= ~CS4215_CLB;
pipe_transmit_fixed(sc, 17, sc->sc_mm.c.lcontrol);
@@ -1058,7 +1065,7 @@ mmcodec_setcontrol(struct dbri_softc *sc
mmcodec_setgain(sc, 0);
- return (0);
+ return ret;
}
@@ -1731,7 +1738,7 @@ dbri_set_params(void *hdl, int setmode,
sc->sc_mm.c.bcontrol[1] |= CS4215_DFR_STEREO;
break;
}
-
+ sc->sc_whack_codec = 1;
return (0);
}
@@ -1975,6 +1982,30 @@ dbri_get_props(void *hdl)
}
static int
+dbri_commit(void *hdl)
+{
+ struct dbri_softc *sc = hdl;
+ int ret = 0;
+
+ /*
+ * we only need to whack the codec if things like sample format or
+ * frequency changed, not for mixer stuff
+ */
+ if (sc->sc_whack_codec == 0)
+ return 0;
+
+ ret = mmcodec_setcontrol(sc);
+ if (ret) {
+ DPRINTF("%s: control mode failed. Mutex %s PIL %x\n", __func__,
+ mutex_owned(&sc->sc_intr_lock) ? "held" : "free",
+ (getpsr() & PSR_PIL) >> 8);
+ } else
+ DPRINTF("%s: control mode ok\n", __func__);
+ mmcodec_init_data(sc);
+ return 0;
+}
+
+static int
dbri_trigger_output(void *hdl, void *start, void *end, int blksize,
void (*intr)(void *), void *intrarg,
const struct audio_params *param)
@@ -1994,13 +2025,6 @@ dbri_trigger_output(void *hdl, void *sta
sc->sc_params = *param;
- if (sc->sc_recording == 0) {
- /* do not muck with the codec when it's already in use */
- if (mmcodec_setcontrol(sc) != 0)
- return -1;
- mmcodec_init_data(sc);
- }
-
/*
* always use DMA descriptor 0 for output
* no need to allocate them dynamically since we only ever have
@@ -2044,17 +2068,6 @@ dbri_trigger_input(void *hdl, void *star
sc->sc_params = *param;
- if (sc->sc_playing == 0) {
-
- /*
- * we don't support different parameters for playing and
- * recording anyway so don't bother whacking the codec if
- * it's already set up
- */
- mmcodec_setcontrol(sc);
- mmcodec_init_data(sc);
- }
-
sc->sc_recording = 1;
setup_ring_recv(sc, 6, 1, num, blksize, intr, intrarg);
return 0;
Index: src/sys/dev/sbus/dbrivar.h
diff -u src/sys/dev/sbus/dbrivar.h:1.13 src/sys/dev/sbus/dbrivar.h:1.13.42.1
--- src/sys/dev/sbus/dbrivar.h:1.13 Wed Nov 23 23:07:36 2011
+++ src/sys/dev/sbus/dbrivar.h Sat Jan 13 05:40:25 2018
@@ -1,4 +1,4 @@
-/* $NetBSD: dbrivar.h,v 1.13 2011/11/23 23:07:36 jmcneill Exp $ */
+/* $NetBSD: dbrivar.h,v 1.13.42.1 2018/01/13 05:40:25 snj Exp $ */
/*
* Copyright (C) 1997 Rudolf Koenig (rfkoe...@immd4.informatik.uni-erlangen.de)
@@ -153,6 +153,7 @@ struct dbri_softc {
int sc_linp, sc_rinp; /* input volume */
int sc_monitor; /* monitor volume */
int sc_input; /* 0 - line, 1 - mic */
+ int sc_whack_codec; /* 1 - codec needs control mode */
int sc_ctl_mode;
