Module Name: src
Committed By: maxv
Date: Sat Jul 14 15:09:41 UTC 2018
Modified Files:
src/sys/arch/bebox/conf: INSTALL
src/sys/arch/evbarm/conf: ARMADAXP ARMADILLO-IOT-G3 BCM5301X BCM56340
CUBOX CUBOX-I DUOVERO EXYNOS GENERIC GENERIC.common GENERIC64
GOLDENGATE IGEPV2 IMX31LITE IMX6UL-STARTER MARVELL_NAS N900
NITROGEN6X OMAP5EVM OVERO PANDABOARD PEPPER SUNXI TEGRA TISDP2420
TISDP2430 VEXPRESS_A15 VIRT VTC100
src/sys/arch/sandpoint/conf: ENCPP1 SANDPOINT
Log Message:
Remove "options IPKDB", and the other associated options, from the config
files.
ipkdb is being retired. Its code is really old, and hasn't kept pace with
today's expectations: IPv6, SMP, modern NICs. The associated code for x86
was already removed because it was too incorrect to stay.
There are plans to rewrite a similar feature from scratch.
ok kamil christos
To generate a diff of this commit:
cvs rdiff -u -r1.63 -r1.64 src/sys/arch/bebox/conf/INSTALL
cvs rdiff -u -r1.24 -r1.25 src/sys/arch/evbarm/conf/ARMADAXP
cvs rdiff -u -r1.11 -r1.12 src/sys/arch/evbarm/conf/ARMADILLO-IOT-G3
cvs rdiff -u -r1.31 -r1.32 src/sys/arch/evbarm/conf/BCM5301X
cvs rdiff -u -r1.16 -r1.17 src/sys/arch/evbarm/conf/BCM56340 \
src/sys/arch/evbarm/conf/NITROGEN6X
cvs rdiff -u -r1.8 -r1.9 src/sys/arch/evbarm/conf/CUBOX \
src/sys/arch/evbarm/conf/PEPPER
cvs rdiff -u -r1.14 -r1.15 src/sys/arch/evbarm/conf/CUBOX-I
cvs rdiff -u -r1.9 -r1.10 src/sys/arch/evbarm/conf/DUOVERO
cvs rdiff -u -r1.30 -r1.31 src/sys/arch/evbarm/conf/EXYNOS \
src/sys/arch/evbarm/conf/MARVELL_NAS
cvs rdiff -u -r1.4 -r1.5 src/sys/arch/evbarm/conf/GENERIC
cvs rdiff -u -r1.29 -r1.30 src/sys/arch/evbarm/conf/GENERIC.common
cvs rdiff -u -r1.26 -r1.27 src/sys/arch/evbarm/conf/GENERIC64 \
src/sys/arch/evbarm/conf/PANDABOARD
cvs rdiff -u -r1.18 -r1.19 src/sys/arch/evbarm/conf/GOLDENGATE \
src/sys/arch/evbarm/conf/VTC100
cvs rdiff -u -r1.32 -r1.33 src/sys/arch/evbarm/conf/IGEPV2
cvs rdiff -u -r1.33 -r1.34 src/sys/arch/evbarm/conf/IMX31LITE
cvs rdiff -u -r1.6 -r1.7 src/sys/arch/evbarm/conf/IMX6UL-STARTER \
src/sys/arch/evbarm/conf/VIRT
cvs rdiff -u -r1.28 -r1.29 src/sys/arch/evbarm/conf/N900
cvs rdiff -u -r1.13 -r1.14 src/sys/arch/evbarm/conf/OMAP5EVM
cvs rdiff -u -r1.51 -r1.52 src/sys/arch/evbarm/conf/OVERO
cvs rdiff -u -r1.78 -r1.79 src/sys/arch/evbarm/conf/SUNXI
cvs rdiff -u -r1.36 -r1.37 src/sys/arch/evbarm/conf/TEGRA
cvs rdiff -u -r1.38 -r1.39 src/sys/arch/evbarm/conf/TISDP2420
cvs rdiff -u -r1.37 -r1.38 src/sys/arch/evbarm/conf/TISDP2430
cvs rdiff -u -r1.22 -r1.23 src/sys/arch/evbarm/conf/VEXPRESS_A15
cvs rdiff -u -r1.19 -r1.20 src/sys/arch/sandpoint/conf/ENCPP1
cvs rdiff -u -r1.15 -r1.16 src/sys/arch/sandpoint/conf/SANDPOINT
Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.
Modified files:
Index: src/sys/arch/bebox/conf/INSTALL
diff -u src/sys/arch/bebox/conf/INSTALL:1.63 src/sys/arch/bebox/conf/INSTALL:1.64
--- src/sys/arch/bebox/conf/INSTALL:1.63 Sat Jul 14 14:56:02 2018
+++ src/sys/arch/bebox/conf/INSTALL Sat Jul 14 15:09:40 2018
@@ -1,4 +1,4 @@
-# $NetBSD: INSTALL,v 1.63 2018/07/14 14:56:02 maxv Exp $
+# $NetBSD: INSTALL,v 1.64 2018/07/14 15:09:40 maxv Exp $
#
# First try for BeBox config file
#
@@ -18,10 +18,6 @@ options MEMORY_DISK_SERVER=0 # no users
options MEMORY_DISK_ROOT_SIZE=4096 # size of memory disk, in blocks
options MEMORY_DISK_RBFLAGS=RB_SINGLE # boot in single-user mode
-#options IPKDBUSERHACK # Allow access to mapped memory via kgdb
-# HMAC key to be used for debugging sessions
-#options IPKDBKEY="\"HMAC pass phrase text\""
-#options IPKDBSECURE # Allow debugging even when securelevel > 0
#makeoptions DEBUG="-g"
#options DEBUG
Index: src/sys/arch/evbarm/conf/ARMADAXP
diff -u src/sys/arch/evbarm/conf/ARMADAXP:1.24 src/sys/arch/evbarm/conf/ARMADAXP:1.25
--- src/sys/arch/evbarm/conf/ARMADAXP:1.24 Thu Jul 12 10:46:43 2018
+++ src/sys/arch/evbarm/conf/ARMADAXP Sat Jul 14 15:09:41 2018
@@ -1,5 +1,5 @@
#
-# $NetBSD: ARMADAXP,v 1.24 2018/07/12 10:46:43 maxv Exp $
+# $NetBSD: ARMADAXP,v 1.25 2018/07/14 15:09:41 maxv Exp $
#
# ARMADA XP DEV BOARD
#
@@ -116,7 +116,6 @@ options DIAGNOSTIC # internal consiste
#options DEBUG
#options PMAP_DEBUG # Enable pmap_debug_level code
options PMAPCOUNTERS
-#options IPKDB # remote kernel debugging
#options VERBOSE_INIT_ARM # verbose bootstraping messages
options DDB # in-kernel debugger
options DDB_ONPANIC=1
Index: src/sys/arch/evbarm/conf/ARMADILLO-IOT-G3
diff -u src/sys/arch/evbarm/conf/ARMADILLO-IOT-G3:1.11 src/sys/arch/evbarm/conf/ARMADILLO-IOT-G3:1.12
--- src/sys/arch/evbarm/conf/ARMADILLO-IOT-G3:1.11 Thu Jul 12 10:46:43 2018
+++ src/sys/arch/evbarm/conf/ARMADILLO-IOT-G3 Sat Jul 14 15:09:41 2018
@@ -1,4 +1,4 @@
-# $NetBSD: ARMADILLO-IOT-G3,v 1.11 2018/07/12 10:46:43 maxv Exp $
+# $NetBSD: ARMADILLO-IOT-G3,v 1.12 2018/07/14 15:09:41 maxv Exp $
#
# ARMADILLO-IOT-G3 -- Atmark Techno, Armadillo-IoT G3
#
@@ -63,7 +63,6 @@ options DDB # in-kernel debugger
#options DDB_COMMANDONENTER="bt" # execute command when ddb is entered
options DDB_ONPANIC=1 # see also sysctl(7): `ddb.onpanic'
options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
-#options IPKDB # remote kernel debugging
#options KGDB
#options KGDB_DEVNAME="\"imxuart\""
#options KGDB_DEVADDR=0x30a70000
Index: src/sys/arch/evbarm/conf/BCM5301X
diff -u src/sys/arch/evbarm/conf/BCM5301X:1.31 src/sys/arch/evbarm/conf/BCM5301X:1.32
--- src/sys/arch/evbarm/conf/BCM5301X:1.31 Thu Jul 12 10:46:43 2018
+++ src/sys/arch/evbarm/conf/BCM5301X Sat Jul 14 15:09:41 2018
@@ -1,5 +1,5 @@
#
-# $NetBSD: BCM5301X,v 1.31 2018/07/12 10:46:43 maxv Exp $
+# $NetBSD: BCM5301X,v 1.32 2018/07/14 15:09:41 maxv Exp $
#
# BCM5301X -- Broadcom BCM5301X Eval Board Kernel
#
@@ -129,7 +129,6 @@ options DIAGNOSTIC # internal consisten
options DEBUG
#options LOCKDEBUG # Enable lock debugging
#options PMAP_DEBUG # Enable pmap_debug_level code
-#options IPKDB # remote kernel debugging
options VERBOSE_INIT_ARM # verbose bootstraping messages
options DDB # in-kernel debugger
options DDB_ONPANIC=1
Index: src/sys/arch/evbarm/conf/BCM56340
diff -u src/sys/arch/evbarm/conf/BCM56340:1.16 src/sys/arch/evbarm/conf/BCM56340:1.17
--- src/sys/arch/evbarm/conf/BCM56340:1.16 Thu Jul 12 10:46:43 2018
+++ src/sys/arch/evbarm/conf/BCM56340 Sat Jul 14 15:09:41 2018
@@ -1,5 +1,5 @@
#
-# $NetBSD: BCM56340,v 1.16 2018/07/12 10:46:43 maxv Exp $
+# $NetBSD: BCM56340,v 1.17 2018/07/14 15:09:41 maxv Exp $
#
# BCM5301X -- Broadcom BCM5301X Eval Board Kernel
#
@@ -129,7 +129,6 @@ options DIAGNOSTIC # internal consisten
options DEBUG
#options LOCKDEBUG # Enable lock debugging
#options PMAP_DEBUG # Enable pmap_debug_level code
-#options IPKDB # remote kernel debugging
options VERBOSE_INIT_ARM # verbose bootstraping messages
options DDB # in-kernel debugger
options DDB_ONPANIC=1
Index: src/sys/arch/evbarm/conf/NITROGEN6X
diff -u src/sys/arch/evbarm/conf/NITROGEN6X:1.16 src/sys/arch/evbarm/conf/NITROGEN6X:1.17
--- src/sys/arch/evbarm/conf/NITROGEN6X:1.16 Thu Jul 12 10:46:43 2018
+++ src/sys/arch/evbarm/conf/NITROGEN6X Sat Jul 14 15:09:41 2018
@@ -1,4 +1,4 @@
-# $NetBSD: NITROGEN6X,v 1.16 2018/07/12 10:46:43 maxv Exp $
+# $NetBSD: NITROGEN6X,v 1.17 2018/07/14 15:09:41 maxv Exp $
#
# Nitrogen6X
# - http://boundarydevices.com/products/nitrogen6x-board-imx6-arm-cortex-a9-sbc/
@@ -61,7 +61,6 @@ options DDB # in-kernel debugger
options DDB_ONPANIC=1 # see also sysctl(7): `ddb.onpanic'
options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
options DDB_VERBOSE_HELP
-#options IPKDB # remote kernel debugging
#options KGDB
#options KGDB_DEVNAME="\"imxuart\""
#options KGDB_DEVADDR=0x021e8000
Index: src/sys/arch/evbarm/conf/CUBOX
diff -u src/sys/arch/evbarm/conf/CUBOX:1.8 src/sys/arch/evbarm/conf/CUBOX:1.9
--- src/sys/arch/evbarm/conf/CUBOX:1.8 Thu Jul 12 10:46:43 2018
+++ src/sys/arch/evbarm/conf/CUBOX Sat Jul 14 15:09:41 2018
@@ -1,4 +1,4 @@
-# $NetBSD: CUBOX,v 1.8 2018/07/12 10:46:43 maxv Exp $
+# $NetBSD: CUBOX,v 1.9 2018/07/14 15:09:41 maxv Exp $
#
# CUBOX -- SolidRun Ltd. Cubox kernel
#
@@ -63,7 +63,6 @@ options DDB # in-kernel debugger
options DDB_ONPANIC=1 # see also sysctl(7): `ddb.onpanic'
options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
options DDB_VERBOSE_HELP
-#options IPKDB # remote kernel debugging
#options KGDB
#options KGDB_DEVRATE=115200
makeoptions DEBUG="-g" # compile full symbol table
Index: src/sys/arch/evbarm/conf/PEPPER
diff -u src/sys/arch/evbarm/conf/PEPPER:1.8 src/sys/arch/evbarm/conf/PEPPER:1.9
--- src/sys/arch/evbarm/conf/PEPPER:1.8 Thu Jul 12 10:46:43 2018
+++ src/sys/arch/evbarm/conf/PEPPER Sat Jul 14 15:09:41 2018
@@ -1,5 +1,5 @@
#
-# $NetBSD: PEPPER,v 1.8 2018/07/12 10:46:43 maxv Exp $
+# $NetBSD: PEPPER,v 1.9 2018/07/14 15:09:41 maxv Exp $
#
# PEPPER -- Gumstix. Inc. Pepper Single Board Computer platforms kernel
#
@@ -131,7 +131,6 @@ options DIAGNOSTIC # internal consisten
options DEBUG
#options LOCKDEBUG
#options PMAP_DEBUG # Enable pmap_debug_level code
-#options IPKDB # remote kernel debugging
#options VERBOSE_INIT_ARM # verbose bootstraping messages
options DDB # in-kernel debugger
options DDB_ONPANIC=1
Index: src/sys/arch/evbarm/conf/CUBOX-I
diff -u src/sys/arch/evbarm/conf/CUBOX-I:1.14 src/sys/arch/evbarm/conf/CUBOX-I:1.15
--- src/sys/arch/evbarm/conf/CUBOX-I:1.14 Thu Jul 12 10:46:43 2018
+++ src/sys/arch/evbarm/conf/CUBOX-I Sat Jul 14 15:09:41 2018
@@ -1,4 +1,4 @@
-# $NetBSD: CUBOX-I,v 1.14 2018/07/12 10:46:43 maxv Exp $
+# $NetBSD: CUBOX-I,v 1.15 2018/07/14 15:09:41 maxv Exp $
#
# CuBox-i
# - http://www.solid-run.com/products/cubox-i-mini-computer/
@@ -61,7 +61,6 @@ options DDB # in-kernel debugger
options DDB_ONPANIC=1 # see also sysctl(7): `ddb.onpanic'
options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
options DDB_VERBOSE_HELP
-#options IPKDB # remote kernel debugging
#options KGDB
#options KGDB_DEVNAME="\"imxuart\""
#options KGDB_DEVADDR=0x02020000
Index: src/sys/arch/evbarm/conf/DUOVERO
diff -u src/sys/arch/evbarm/conf/DUOVERO:1.9 src/sys/arch/evbarm/conf/DUOVERO:1.10
--- src/sys/arch/evbarm/conf/DUOVERO:1.9 Thu Jul 12 10:46:43 2018
+++ src/sys/arch/evbarm/conf/DUOVERO Sat Jul 14 15:09:41 2018
@@ -1,5 +1,5 @@
#
-# $NetBSD: DUOVERO,v 1.9 2018/07/12 10:46:43 maxv Exp $
+# $NetBSD: DUOVERO,v 1.10 2018/07/14 15:09:41 maxv Exp $
#
# DUOOVERO -- Gumstix. Inc. DuoVero COMS platforms kernel
#
@@ -133,7 +133,6 @@ options DIAGNOSTIC # internal consisten
options DEBUG
#options LOCKDEBUG
#options PMAP_DEBUG # Enable pmap_debug_level code
-#options IPKDB # remote kernel debugging
#options VERBOSE_INIT_ARM # verbose bootstraping messages
options DDB # in-kernel debugger
options DDB_ONPANIC=1
Index: src/sys/arch/evbarm/conf/EXYNOS
diff -u src/sys/arch/evbarm/conf/EXYNOS:1.30 src/sys/arch/evbarm/conf/EXYNOS:1.31
--- src/sys/arch/evbarm/conf/EXYNOS:1.30 Thu Jul 5 13:11:57 2018
+++ src/sys/arch/evbarm/conf/EXYNOS Sat Jul 14 15:09:41 2018
@@ -1,5 +1,5 @@
#
-# $NetBSD: EXYNOS,v 1.30 2018/07/05 13:11:57 jmcneill Exp $
+# $NetBSD: EXYNOS,v 1.31 2018/07/14 15:09:41 maxv Exp $
#
# Samsung Exynos SoC kernel
#
@@ -26,7 +26,6 @@ pseudo-device openfirm # /dev/openfirm
#options DEBUG
#options LOCKDEBUG
#options PMAP_DEBUG # Enable pmap_debug_level code
-#options IPKDB # remote kernel debugging
#options VERBOSE_INIT_ARM # verbose bootstrapping messages
makeoptions DEBUG="-g" # compile full symbol table
Index: src/sys/arch/evbarm/conf/MARVELL_NAS
diff -u src/sys/arch/evbarm/conf/MARVELL_NAS:1.30 src/sys/arch/evbarm/conf/MARVELL_NAS:1.31
--- src/sys/arch/evbarm/conf/MARVELL_NAS:1.30 Thu Jul 12 10:46:43 2018
+++ src/sys/arch/evbarm/conf/MARVELL_NAS Sat Jul 14 15:09:41 2018
@@ -1,4 +1,4 @@
-# $NetBSD: MARVELL_NAS,v 1.30 2018/07/12 10:46:43 maxv Exp $
+# $NetBSD: MARVELL_NAS,v 1.31 2018/07/14 15:09:41 maxv Exp $
#
# This configuration supports for generically Marvell NAS.
@@ -235,7 +235,6 @@ options BUFQ_PRIOCSCAN
#options DEBUG
#options LOCKDEBUG
#options PMAP_DEBUG # Enable pmap_debug_level code
-#options IPKDB # remote kernel debugging
#options VERBOSE_INIT_ARM # verbose bootstraping messages
options DDB # in-kernel debugger
options DDB_ONPANIC=0
Index: src/sys/arch/evbarm/conf/GENERIC
diff -u src/sys/arch/evbarm/conf/GENERIC:1.4 src/sys/arch/evbarm/conf/GENERIC:1.5
--- src/sys/arch/evbarm/conf/GENERIC:1.4 Sat Jun 30 16:48:49 2018
+++ src/sys/arch/evbarm/conf/GENERIC Sat Jul 14 15:09:41 2018
@@ -1,5 +1,5 @@
#
-# $NetBSD: GENERIC,v 1.4 2018/06/30 16:48:49 jmcneill Exp $
+# $NetBSD: GENERIC,v 1.5 2018/07/14 15:09:41 maxv Exp $
#
# GENERIC ARM (aarch32) kernel
#
@@ -41,7 +41,6 @@ pseudo-device openfirm # /dev/openfirm
#options DEBUG
#options LOCKDEBUG
#options PMAP_DEBUG # Enable pmap_debug_level code
-#options IPKDB # remote kernel debugging
options VERBOSE_INIT_ARM # verbose bootstrapping messages
# EARLYCONS is required for early init messages from VERBOSE_INIT_ARM.
#options EARLYCONS=sunxi, CONSADDR=0x01c28000
Index: src/sys/arch/evbarm/conf/GENERIC.common
diff -u src/sys/arch/evbarm/conf/GENERIC.common:1.29 src/sys/arch/evbarm/conf/GENERIC.common:1.30
--- src/sys/arch/evbarm/conf/GENERIC.common:1.29 Thu Jul 12 10:46:43 2018
+++ src/sys/arch/evbarm/conf/GENERIC.common Sat Jul 14 15:09:41 2018
@@ -1,5 +1,5 @@
#
-# $NetBSD: GENERIC.common,v 1.29 2018/07/12 10:46:43 maxv Exp $
+# $NetBSD: GENERIC.common,v 1.30 2018/07/14 15:09:41 maxv Exp $
#
# GENERIC evbarm kernel config (template)
#
@@ -111,7 +111,6 @@ options DIAGNOSTIC # internal consisten
options KDTRACE_HOOKS # kernel DTrace hooks
#options LOCKDEBUG
#options PMAP_DEBUG # Enable pmap_debug_level code
-#options IPKDB # remote kernel debugging
#options VERBOSE_INIT_ARM # verbose bootstraping messages
options DDB # in-kernel debugger
options DDB_ONPANIC=1
Index: src/sys/arch/evbarm/conf/GENERIC64
diff -u src/sys/arch/evbarm/conf/GENERIC64:1.26 src/sys/arch/evbarm/conf/GENERIC64:1.27
--- src/sys/arch/evbarm/conf/GENERIC64:1.26 Mon Jul 9 09:13:50 2018
+++ src/sys/arch/evbarm/conf/GENERIC64 Sat Jul 14 15:09:41 2018
@@ -1,5 +1,5 @@
#
-# $NetBSD: GENERIC64,v 1.26 2018/07/09 09:13:50 jmcneill Exp $
+# $NetBSD: GENERIC64,v 1.27 2018/07/14 15:09:41 maxv Exp $
#
# GENERIC ARM (aarch64) kernel
#
@@ -65,7 +65,6 @@ options DIAGNOSTIC # internal consisten
options DEBUG
#options LOCKDEBUG
#options PMAP_DEBUG # Enable pmap_debug_level code
-#options IPKDB # remote kernel debugging
options VERBOSE_INIT_ARM # verbose bootstrapping messages
# EARLYCONS is required for early init messages from VERBOSE_INIT_ARM.
#options EARLYCONS=bcm2837
Index: src/sys/arch/evbarm/conf/PANDABOARD
diff -u src/sys/arch/evbarm/conf/PANDABOARD:1.26 src/sys/arch/evbarm/conf/PANDABOARD:1.27
--- src/sys/arch/evbarm/conf/PANDABOARD:1.26 Thu Jul 12 10:46:43 2018
+++ src/sys/arch/evbarm/conf/PANDABOARD Sat Jul 14 15:09:41 2018
@@ -1,5 +1,5 @@
#
-# $NetBSD: PANDABOARD,v 1.26 2018/07/12 10:46:43 maxv Exp $
+# $NetBSD: PANDABOARD,v 1.27 2018/07/14 15:09:41 maxv Exp $
#
# PANDABOARD -- TI OMAP 4430 Eval Board Kernel
#
@@ -114,7 +114,6 @@ options KTRACE # system call tracing,
options DIAGNOSTIC # internal consistency checks
#options DEBUG
#options PMAP_DEBUG # Enable pmap_debug_level code
-#options IPKDB # remote kernel debugging
#options VERBOSE_INIT_ARM # verbose bootstraping messages
options DDB # in-kernel debugger
options DDB_ONPANIC=1
Index: src/sys/arch/evbarm/conf/GOLDENGATE
diff -u src/sys/arch/evbarm/conf/GOLDENGATE:1.18 src/sys/arch/evbarm/conf/GOLDENGATE:1.19
--- src/sys/arch/evbarm/conf/GOLDENGATE:1.18 Thu Jul 12 10:46:43 2018
+++ src/sys/arch/evbarm/conf/GOLDENGATE Sat Jul 14 15:09:41 2018
@@ -1,5 +1,5 @@
#
-# $NetBSD: GOLDENGATE,v 1.18 2018/07/12 10:46:43 maxv Exp $
+# $NetBSD: GOLDENGATE,v 1.19 2018/07/14 15:09:41 maxv Exp $
#
# GOLDENGATE -- Cortina GOLDENGATE Eval Board Kernel
#
@@ -125,7 +125,6 @@ options DIAGNOSTIC # internal consisten
options DEBUG
#options LOCKDEBUG # Enable lock debugging
#options PMAP_DEBUG # Enable pmap_debug_level code
-#options IPKDB # remote kernel debugging
#options VERBOSE_INIT_ARM # verbose bootstraping messages
options DDB # in-kernel debugger
options DDB_ONPANIC=1
Index: src/sys/arch/evbarm/conf/VTC100
diff -u src/sys/arch/evbarm/conf/VTC100:1.18 src/sys/arch/evbarm/conf/VTC100:1.19
--- src/sys/arch/evbarm/conf/VTC100:1.18 Thu Jul 12 10:46:43 2018
+++ src/sys/arch/evbarm/conf/VTC100 Sat Jul 14 15:09:41 2018
@@ -1,5 +1,5 @@
#
-# $NetBSD: VTC100,v 1.18 2018/07/12 10:46:43 maxv Exp $
+# $NetBSD: VTC100,v 1.19 2018/07/14 15:09:41 maxv Exp $
#
# VTC100 -- NEXCOM VTC100 Kernel
#
@@ -117,7 +117,6 @@ options KTRACE # system call tracing,
options DIAGNOSTIC # internal consistency checks
options DEBUG
#options PMAP_DEBUG # Enable pmap_debug_level code
-#options IPKDB # remote kernel debugging
#options VERBOSE_INIT_ARM # verbose bootstraping messages
options DDB # in-kernel debugger
options DDB_ONPANIC=1
Index: src/sys/arch/evbarm/conf/IGEPV2
diff -u src/sys/arch/evbarm/conf/IGEPV2:1.32 src/sys/arch/evbarm/conf/IGEPV2:1.33
--- src/sys/arch/evbarm/conf/IGEPV2:1.32 Thu Jul 12 10:46:43 2018
+++ src/sys/arch/evbarm/conf/IGEPV2 Sat Jul 14 15:09:41 2018
@@ -1,5 +1,5 @@
#
-# $NetBSD: IGEPV2,v 1.32 2018/07/12 10:46:43 maxv Exp $
+# $NetBSD: IGEPV2,v 1.33 2018/07/14 15:09:41 maxv Exp $
#
# IGEPv2 -- TI OMAP 3530 Eval Board Kernel
#
@@ -112,7 +112,6 @@ options KTRACE # system call tracing,
options DIAGNOSTIC # internal consistency checks
#options DEBUG
#options PMAP_DEBUG # Enable pmap_debug_level code
-#options IPKDB # remote kernel debugging
options VERBOSE_INIT_ARM # verbose bootstraping messages
options DDB # in-kernel debugger
options DDB_ONPANIC=1
Index: src/sys/arch/evbarm/conf/IMX31LITE
diff -u src/sys/arch/evbarm/conf/IMX31LITE:1.33 src/sys/arch/evbarm/conf/IMX31LITE:1.34
--- src/sys/arch/evbarm/conf/IMX31LITE:1.33 Thu Sep 14 07:58:40 2017
+++ src/sys/arch/evbarm/conf/IMX31LITE Sat Jul 14 15:09:41 2018
@@ -1,4 +1,4 @@
-# $NetBSD: IMX31LITE,v 1.33 2017/09/14 07:58:40 mrg Exp $
+# $NetBSD: IMX31LITE,v 1.34 2018/07/14 15:09:41 maxv Exp $
#
# IMX31LITE -- Freescale IMX31LITE Evaluation Board Kernel
#
@@ -109,7 +109,6 @@ options DIAGNOSTIC # internal consisten
options DEBUG
#options LOCKDEBUG
options PMAP_DEBUG # Enable pmap_debug_level code
-#options IPKDB # remote kernel debugging
options VERBOSE_INIT_ARM # verbose bootstraping messages
options DDB # in-kernel debugger
options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
Index: src/sys/arch/evbarm/conf/IMX6UL-STARTER
diff -u src/sys/arch/evbarm/conf/IMX6UL-STARTER:1.6 src/sys/arch/evbarm/conf/IMX6UL-STARTER:1.7
--- src/sys/arch/evbarm/conf/IMX6UL-STARTER:1.6 Thu Jul 12 10:46:43 2018
+++ src/sys/arch/evbarm/conf/IMX6UL-STARTER Sat Jul 14 15:09:41 2018
@@ -1,4 +1,4 @@
-# $NetBSD: IMX6UL-STARTER,v 1.6 2018/07/12 10:46:43 maxv Exp $
+# $NetBSD: IMX6UL-STARTER,v 1.7 2018/07/14 15:09:41 maxv Exp $
#
# IMX6UL-STARTER - Freescale i.MX6UL Evaluation Board
#
@@ -63,7 +63,6 @@ options DDB # in-kernel debugger
options DDB_ONPANIC=1 # see also sysctl(7): `ddb.onpanic'
options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
options DDB_VERBOSE_HELP
-#options IPKDB # remote kernel debugging
#options KGDB
#options KGDB_DEVNAME="\"imxuart\""
#options KGDB_DEVADDR=0x021f4000
Index: src/sys/arch/evbarm/conf/VIRT
diff -u src/sys/arch/evbarm/conf/VIRT:1.6 src/sys/arch/evbarm/conf/VIRT:1.7
--- src/sys/arch/evbarm/conf/VIRT:1.6 Sat Jun 30 16:48:49 2018
+++ src/sys/arch/evbarm/conf/VIRT Sat Jul 14 15:09:41 2018
@@ -1,5 +1,5 @@
#
-# $NetBSD: VIRT,v 1.6 2018/06/30 16:48:49 jmcneill Exp $
+# $NetBSD: VIRT,v 1.7 2018/07/14 15:09:41 maxv Exp $
#
# QEMU ARM 'virt' virtual machine
#
@@ -19,7 +19,6 @@ pseudo-device openfirm # /dev/openfirm
#options DEBUG
#options LOCKDEBUG
#options PMAP_DEBUG # Enable pmap_debug_level code
-#options IPKDB # remote kernel debugging
#options VERBOSE_INIT_ARM # verbose bootstrapping messages
#options CONSADDR=0x09000000
Index: src/sys/arch/evbarm/conf/N900
diff -u src/sys/arch/evbarm/conf/N900:1.28 src/sys/arch/evbarm/conf/N900:1.29
--- src/sys/arch/evbarm/conf/N900:1.28 Thu Jul 12 10:46:43 2018
+++ src/sys/arch/evbarm/conf/N900 Sat Jul 14 15:09:41 2018
@@ -1,5 +1,5 @@
#
-# $NetBSD: N900,v 1.28 2018/07/12 10:46:43 maxv Exp $
+# $NetBSD: N900,v 1.29 2018/07/14 15:09:41 maxv Exp $
#
# N900 -- Nokia N900 Kernel
#
@@ -112,7 +112,6 @@ options DIAGNOSTIC # internal consisten
#options DEBUG
#options LOCKDEBUG # expensive locking checks/support
#options PMAP_DEBUG # Enable pmap_debug_level code
-#options IPKDB # remote kernel debugging
#options VERBOSE_INIT_ARM # verbose bootstraping messages
options DDB # in-kernel debugger
options DDB_ONPANIC=1
Index: src/sys/arch/evbarm/conf/OMAP5EVM
diff -u src/sys/arch/evbarm/conf/OMAP5EVM:1.13 src/sys/arch/evbarm/conf/OMAP5EVM:1.14
--- src/sys/arch/evbarm/conf/OMAP5EVM:1.13 Thu Jul 12 10:46:43 2018
+++ src/sys/arch/evbarm/conf/OMAP5EVM Sat Jul 14 15:09:41 2018
@@ -1,5 +1,5 @@
#
-# $NetBSD: OMAP5EVM,v 1.13 2018/07/12 10:46:43 maxv Exp $
+# $NetBSD: OMAP5EVM,v 1.14 2018/07/14 15:09:41 maxv Exp $
#
# PANDABOARD -- TI OMAP 4430 Eval Board Kernel
#
@@ -116,7 +116,6 @@ options KTRACE # system call tracing,
options DIAGNOSTIC # internal consistency checks
#options DEBUG
#options PMAP_DEBUG # Enable pmap_debug_level code
-#options IPKDB # remote kernel debugging
#options VERBOSE_INIT_ARM # verbose bootstraping messages
options DDB # in-kernel debugger
options DDB_ONPANIC=1
Index: src/sys/arch/evbarm/conf/OVERO
diff -u src/sys/arch/evbarm/conf/OVERO:1.51 src/sys/arch/evbarm/conf/OVERO:1.52
--- src/sys/arch/evbarm/conf/OVERO:1.51 Thu Jul 12 10:46:43 2018
+++ src/sys/arch/evbarm/conf/OVERO Sat Jul 14 15:09:41 2018
@@ -1,5 +1,5 @@
#
-# $NetBSD: OVERO,v 1.51 2018/07/12 10:46:43 maxv Exp $
+# $NetBSD: OVERO,v 1.52 2018/07/14 15:09:41 maxv Exp $
#
# OVERO -- Gumstix. Inc. Overo COMS platforms kernel
#
@@ -131,7 +131,6 @@ options DIAGNOSTIC # internal consisten
options DEBUG
#options LOCKDEBUG
#options PMAP_DEBUG # Enable pmap_debug_level code
-#options IPKDB # remote kernel debugging
#options VERBOSE_INIT_ARM # verbose bootstraping messages
options DDB # in-kernel debugger
options DDB_ONPANIC=1
Index: src/sys/arch/evbarm/conf/SUNXI
diff -u src/sys/arch/evbarm/conf/SUNXI:1.78 src/sys/arch/evbarm/conf/SUNXI:1.79
--- src/sys/arch/evbarm/conf/SUNXI:1.78 Sat Jun 30 16:48:49 2018
+++ src/sys/arch/evbarm/conf/SUNXI Sat Jul 14 15:09:41 2018
@@ -1,5 +1,5 @@
#
-# $NetBSD: SUNXI,v 1.78 2018/06/30 16:48:49 jmcneill Exp $
+# $NetBSD: SUNXI,v 1.79 2018/07/14 15:09:41 maxv Exp $
#
# Allwinner sunxi family
#
@@ -156,7 +156,6 @@ pseudo-device openfirm # /dev/openfirm
#options DEBUG
#options LOCKDEBUG
#options PMAP_DEBUG # Enable pmap_debug_level code
-#options IPKDB # remote kernel debugging
#options VERBOSE_INIT_ARM # verbose bootstrapping messages
# CONSADDR is required for early init messages from VERBOSE_INIT_ARM.
#options CONSADDR=0x01c28000
Index: src/sys/arch/evbarm/conf/TEGRA
diff -u src/sys/arch/evbarm/conf/TEGRA:1.36 src/sys/arch/evbarm/conf/TEGRA:1.37
--- src/sys/arch/evbarm/conf/TEGRA:1.36 Sat Jun 30 16:48:49 2018
+++ src/sys/arch/evbarm/conf/TEGRA Sat Jul 14 15:09:41 2018
@@ -1,5 +1,5 @@
#
-# $NetBSD: TEGRA,v 1.36 2018/06/30 16:48:49 jmcneill Exp $
+# $NetBSD: TEGRA,v 1.37 2018/07/14 15:09:41 maxv Exp $
#
# NVIDIA Tegra family SoCs
#
@@ -34,7 +34,6 @@ pseudo-device openfirm # /dev/openfirm
#options DEBUG
#options LOCKDEBUG
#options PMAP_DEBUG # Enable pmap_debug_level code
-#options IPKDB # remote kernel debugging
#options VERBOSE_INIT_ARM # verbose bootstrapping messages
# CONSADDR is required for early init messages from VERBOSE_INIT_ARM.
#options CONSADDR=0x70006300
Index: src/sys/arch/evbarm/conf/TISDP2420
diff -u src/sys/arch/evbarm/conf/TISDP2420:1.38 src/sys/arch/evbarm/conf/TISDP2420:1.39
--- src/sys/arch/evbarm/conf/TISDP2420:1.38 Thu Jul 12 10:46:43 2018
+++ src/sys/arch/evbarm/conf/TISDP2420 Sat Jul 14 15:09:41 2018
@@ -1,5 +1,5 @@
#
-# $NetBSD: TISDP2420,v 1.38 2018/07/12 10:46:43 maxv Exp $
+# $NetBSD: TISDP2420,v 1.39 2018/07/14 15:09:41 maxv Exp $
#
# TISDP2420 -- TI OMAP 2420 Eval Board Kernel
#
@@ -110,7 +110,6 @@ options KTRACE # system call tracing,
options DIAGNOSTIC # internal consistency checks
#options DEBUG
#options PMAP_DEBUG # Enable pmap_debug_level code
-#options IPKDB # remote kernel debugging
options VERBOSE_INIT_ARM # verbose bootstraping messages
options DDB # in-kernel debugger
options DDB_ONPANIC=1
Index: src/sys/arch/evbarm/conf/TISDP2430
diff -u src/sys/arch/evbarm/conf/TISDP2430:1.37 src/sys/arch/evbarm/conf/TISDP2430:1.38
--- src/sys/arch/evbarm/conf/TISDP2430:1.37 Thu Jul 12 10:46:43 2018
+++ src/sys/arch/evbarm/conf/TISDP2430 Sat Jul 14 15:09:41 2018
@@ -1,5 +1,5 @@
#
-# $NetBSD: TISDP2430,v 1.37 2018/07/12 10:46:43 maxv Exp $
+# $NetBSD: TISDP2430,v 1.38 2018/07/14 15:09:41 maxv Exp $
#
# TISDP2430 -- TI OMAP 2430 Eval Board Kernel
#
@@ -109,7 +109,6 @@ options KTRACE # system call tracing,
options DIAGNOSTIC # internal consistency checks
#options DEBUG
#options PMAP_DEBUG # Enable pmap_debug_level code
-#options IPKDB # remote kernel debugging
options VERBOSE_INIT_ARM # verbose bootstraping messages
options DDB # in-kernel debugger
options DDB_ONPANIC=1
Index: src/sys/arch/evbarm/conf/VEXPRESS_A15
diff -u src/sys/arch/evbarm/conf/VEXPRESS_A15:1.22 src/sys/arch/evbarm/conf/VEXPRESS_A15:1.23
--- src/sys/arch/evbarm/conf/VEXPRESS_A15:1.22 Sat Jun 30 16:48:49 2018
+++ src/sys/arch/evbarm/conf/VEXPRESS_A15 Sat Jul 14 15:09:41 2018
@@ -1,5 +1,5 @@
#
-# $NetBSD: VEXPRESS_A15,v 1.22 2018/06/30 16:48:49 jmcneill Exp $
+# $NetBSD: VEXPRESS_A15,v 1.23 2018/07/14 15:09:41 maxv Exp $
#
# ARM Versatile Express A15
#
@@ -18,7 +18,6 @@ pseudo-device openfirm # /dev/openfirm
#options DEBUG
#options LOCKDEBUG
#options PMAP_DEBUG # Enable pmap_debug_level code
-#options IPKDB # remote kernel debugging
#options VERBOSE_INIT_ARM # verbose bootstrapping messages
#options CONSADDR=0x1c090000
Index: src/sys/arch/sandpoint/conf/ENCPP1
diff -u src/sys/arch/sandpoint/conf/ENCPP1:1.19 src/sys/arch/sandpoint/conf/ENCPP1:1.20
--- src/sys/arch/sandpoint/conf/ENCPP1:1.19 Sat Jul 14 14:56:02 2018
+++ src/sys/arch/sandpoint/conf/ENCPP1 Sat Jul 14 15:09:41 2018
@@ -1,4 +1,4 @@
-# $NetBSD: ENCPP1,v 1.19 2018/07/14 14:56:02 maxv Exp $
+# $NetBSD: ENCPP1,v 1.20 2018/07/14 15:09:41 maxv Exp $
#
# Ampro EnCorePP1 machine description file
#
@@ -23,14 +23,10 @@ options PIC_I8259
options INCLUDE_CONFIG_FILE # embed config file in kernel binary
-#ident "ENCPP1-$Revision: 1.19 $"
+#ident "ENCPP1-$Revision: 1.20 $"
maxusers 32
-#options IPKDBUSERHACK # Allow access to mapped memory via kgdb
-# HMAC key to be used for debugging sessions
-#options IPKDBKEY="\"HMAC pass phrase text\""
-#options IPKDBSECURE # Allow debugging even when securelevel > 0
#makeoptions DEBUG="-g"
#options DEBUG
Index: src/sys/arch/sandpoint/conf/SANDPOINT
diff -u src/sys/arch/sandpoint/conf/SANDPOINT:1.15 src/sys/arch/sandpoint/conf/SANDPOINT:1.16
--- src/sys/arch/sandpoint/conf/SANDPOINT:1.15 Sat Jul 14 14:56:02 2018
+++ src/sys/arch/sandpoint/conf/SANDPOINT Sat Jul 14 15:09:41 2018
@@ -1,4 +1,4 @@
-# $NetBSD: SANDPOINT,v 1.15 2018/07/14 14:56:02 maxv Exp $
+# $NetBSD: SANDPOINT,v 1.16 2018/07/14 15:09:41 maxv Exp $
#
# Sandpoint X3/X2 machine description file
#
@@ -23,16 +23,12 @@ options PIC_I8259
options INCLUDE_CONFIG_FILE # embed config file in kernel binary
-#ident "SANDPOINT-$Revision: 1.15 $"
+#ident "SANDPOINT-$Revision: 1.16 $"
maxusers 32
options ALTIVEC # Include AltiVec support
-#options IPKDBUSERHACK # Allow access to mapped memory via kgdb
-# HMAC key to be used for debugging sessions
-#options IPKDBKEY="\"HMAC pass phrase text\""
-#options IPKDBSECURE # Allow debugging even when securelevel > 0
#makeoptions DEBUG="-g"
#options DEBUG
