So, today I decided to create a new RHEL 6 channel and repo and then run the "spacewalk-repo-sync" command and see if I can't get this repo to populate with packages from Red Hat. The same error occurred.
ERROR: Cannot retrieve repository metadata (repomd.xml) for repository: content_dist_rhel_server_6_6Server_x86_64_os_. Please verify its path and try again This tells me that there isn't anything corrupt. I'm really think that I missed something in the configuration or setup of the new server. When I setup the original server, v2.3, I'm thinking there were some additional steps that I had to do once I registered the server to Red Hat. I've been reviewing the installation instructions, but I don't see anything extra that I missed. In the SW, v2.6, installation instructions, all I see is to make sure that the server is properly registered to the appropriate channel: Red Hat Optional Server (Red Hat Enterprise Linux) When using Red Hat Enterprise Linux 6 or 7, make sure you are subscribed to the appropriate Red Hat Optional Server channel: Red Hat Optional Server 6 , OR Red Hat Optional Server 7 The server is properly registered and entitled. I can run a yum repolist and see the repository. I can issue the subscription-manager command and see that the server is subscribed and I can see what repos are enabled. But for some reason, that is not getting passed onto the Spacewalk repo. I tried opening a ticket with Red Hat just so I could verify that everything was registered correctly, but since I don't have a satellite subscription, they closed the ticket without even answering my question. I've run out of idea's. If someone can give me more suggestions, I'm willing to listen. Thanks Daryl ________________________________ From: spacewalk-list-boun...@redhat.com <spacewalk-list-boun...@redhat.com> on behalf of Robert Paschedag <robert.pasche...@web.de> Sent: Friday, December 16, 2016 12:44 AM To: spacewalk-list@redhat.com Subject: Re: [Spacewalk-list] RHEL 6.x repository not syncing from parentchannel Oh... Just saw that the checksum error occurs when run on a "client".. Am 15.12.2016 22:48 schrieb Daryl Rose <darylr...@outlook.com>: One more thought.... What would happen if I were to delete the current RHEL channel and repository and recreate them? What will happen to all of the packages and clients currently registered to the channel/repo? I know that the packages will become orphan, but can I put them back into the new repo, or do I just have to remove them and re-download them from Red Hat? How about the registered clients? Do I have to re-register them, or if I keep the same activation key, the same channel/repo names, will they just pickup the change? Thanks Daryl ________________________________ From: spacewalk-list-boun...@redhat.com <spacewalk-list-boun...@redhat.com> on behalf of Daryl Rose <darylr...@outlook.com> Sent: Thursday, December 15, 2016 2:59 PM To: spacewalk-list@redhat.com Subject: Re: [Spacewalk-list] RHEL 6.x repository not syncing from parentchannel Hello Chris, Thank you for the following steps. I think this resolved this immanent issue, but the issue of not being able to sync from the parent Red Hat repository is still an issue. Do you know how the contents of ./cache/rhn/reposync are created? As a work around, I copied the contents of reposync from the original server to the new server, and I'm able to sync from the Red Hat repository, but that is not a long term solution. I thought that perhaps I had found a solution. Yum can access the repository just fine so I copied the contents from /var/cache/yum/x86_64/6Server/rhel-6-server-rpms to the reposync directory. It started off just fine, but eventually failing due to not being able to find some keys. Actually the keys were generated, but they were of zero length and that won't work. It seems to be obvious that there is something else wrong with my installation, I just don't know what it is. If you, or anyone else have any thoughts are suggestion, I'm willing to take a look and give it a try. Thank you. Daryl ________________________________ From: spacewalk-list-boun...@redhat.com <spacewalk-list-boun...@redhat.com> on behalf of Snyder, Chris <chris.sny...@csra.com> Sent: Wednesday, December 14, 2016 7:07 PM To: spacewalk-list@redhat.com Subject: Re: [Spacewalk-list] RHEL 6.x repository not syncing from parentchannel The “metadata ….” Error indicates that your yum cache (provided by the Spacewalk server) is out of with what is actually available through the Spacewalk package database. This can be because taskomatic isn’t running or there’s a problem somewhere. Check your logs under /var/log/rhn/ for any issues with taskomatic or any other components. However, I’ve run into this before and I do the following to get around it (NOTE: your paths will probably be different than mine): # Blow away all cached metadata rm -fr /data/pkg/cache/rhn/repodata/ # restart spacewalk so empty repodata cache directory is recreated. spacewalk-service stop spacewalk-service start # If not already, cache credentials for spacecmd (This assumes you have configured ~/.spacecmd/config previously) spacecmd softwarechannel_list # Regenerate repo data for all channels for i in `spacecmd softwarechannel_list`; do spacecmd softwarechannel_regenerateyumcache $i; done # Waited a few minutes for data to regenerate Once that’s done and the metadata caches are updated (you’ll see updated directories under the cache dir and you should see info in the taskomatic logs), go to each registered spacewalk client and run yum clean all If this doesn’t work, I would have to say that you’ve got something else wrong somewhere else. Good luck. From: spacewalk-list-boun...@redhat.com [mailto:spacewalk-list-boun...@redhat.com] On Behalf Of Daryl Rose Sent: Wednesday, December 14, 2016 5:58 PM To: spacewalk-list@redhat.com Subject: Re: [Spacewalk-list] RHEL 6.x repository not syncing from parentchannel Hello everyone, I have not received any replies from my previous posting, so I thought that I would post an update hoping someone would see it and reply. This error seems to go deeper than just syncing from Red Hat. Server that are currently registered to the Spacewalk server are not able to access the RHEL repository on SW. If issuing the "yum update" command, we receive the error: Error: failed to retrieve repodata/primary.xml.gz from rhel-6-server-rpms error was [Errno -1] Metadata file does not match checksum If I issue the "yum repolist" command, I only see "0" for packages. So, this issue is larger that what I initially thought. Anyone have any thoughts or idea's? Daryl ________________________________ From: spacewalk-list-boun...@redhat.com<mailto:spacewalk-list-boun...@redhat.com> <spacewalk-list-boun...@redhat.com<mailto:spacewalk-list-boun...@redhat.com>> on behalf of Daryl Rose <darylr...@outlook.com<mailto:darylr...@outlook.com>> Sent: Friday, December 9, 2016 2:56 PM To: spacewalk-list@redhat.com<mailto:spacewalk-list@redhat.com> Subject: Re: [Spacewalk-list] RHEL 6.x repository not syncing from parentchannel So, I resurrected the old server from the grave and copied the contents of "/var/cach/rhn/reposync/rhel-6-server-rpms" to "/var/cach/rhn/reposync/content_dist_rhel_server_6_$releasever_$basearch_os" and ran a sync. The sync worked. The sync worked, but it caused a new error. A team member registered a Red Hat server just after I made these changes. The server registered, but with the following error: Bad id for repo: logstash 5.x, byte = 8 I'm guessing that something within the data that I copied over does not align with the repository on SW? Another thing that I noticed is that the directory structure in the old reposync directory is different than the new server. For example: OLD: /var/cache/rhn/reposync/centos-7-extra /centos-7-server-rpms /centos-7-updae /centos_7_channel /centos_7_plus NEW: /var/cache/rhn/reposync/centos_7_centosplus_x86_64_ /centos_7_extras_x86_64_ /centos_7_os_x86_64_ /centos_7_updates_x86_64_ Is that a SW v2.3 vs. v2.6 change? Thanks Daryl ________________________________ From: spacewalk-list-boun...@redhat.com<mailto:spacewalk-list-boun...@redhat.com> <spacewalk-list-boun...@redhat.com<mailto:spacewalk-list-boun...@redhat.com>> on behalf of Daryl Rose <darylr...@outlook.com<mailto:darylr...@outlook.com>> Sent: Thursday, December 8, 2016 10:32 AM To: spacewalk-list@redhat.com<mailto:spacewalk-list@redhat.com> Subject: Re: [Spacewalk-list] RHEL 6.x repository not syncing from parentchannel More questions: When I run "spacewalk-repo-sync --channel=rhel-6-server-rpms", I get the error: ERROR: Cannot retrieve repository metadata (repomd.xml) for repository: content_dist_rhel_server_6_$releasever_$basearch_os. Please verify its path and try again What creates the content in "/var/cache/rhn/reposync/content_dist_rhel_server_6_$releasever_$basearch_os"? All of the other channels that I created all have "cachecookie, packages, primary.xml.gz, primary.xml.gz.sqlite, repomd.xml and updateinfo.xml.gz". There must be a process that creates this content, but what, I'm not sure. How can I manually create this content? Thanks Daryl ________________________________ From: spacewalk-list-boun...@redhat.com<mailto:spacewalk-list-boun...@redhat.com> <spacewalk-list-boun...@redhat.com<mailto:spacewalk-list-boun...@redhat.com>> on behalf of Daryl Rose <darylr...@outlook.com<mailto:darylr...@outlook.com>> Sent: Thursday, December 8, 2016 9:26 AM To: spacewalk-list@redhat.com<mailto:spacewalk-list@redhat.com> Subject: Re: [Spacewalk-list] RHEL 6.x repository not syncing from parentchannel Quick update. Poking around on Red Hat I found a doc that suggested that I look at the name in /etc/sysconfig/network and ensure that the hostname is FQDN and then run "spacewalk-hostname-rename". Host name was not FQDN, so I renamed it, but because I use a signed cert, will running spacewalk-hostname-rename cause a problem with that cert? Thanks Daryl ________________________________ From: spacewalk-list-boun...@redhat.com<mailto:spacewalk-list-boun...@redhat.com> <spacewalk-list-boun...@redhat.com<mailto:spacewalk-list-boun...@redhat.com>> on behalf of Daryl Rose <darylr...@outlook.com<mailto:darylr...@outlook.com>> Sent: Thursday, December 8, 2016 8:55 AM To: spacewalk-list@redhat.com<mailto:spacewalk-list@redhat.com> Subject: Re: [Spacewalk-list] RHEL 6.x repository not syncing from parentchannel Robert, Yes, the server is registered and has an active subscription with Red Hat. As a matter of fact, I just now re-registered to make sure that all is good. I can see from the command line subscription manager that the server is subscribed, and I confirmed that it is entitled. I use a "signed" cert so I'm wondering if the signed cert has something to do with this? However, I found a troubleshooting document on Red Hat that verifies that I am entitled and using the certificate provided by Red Hat to communicate back to them. Thank you Daryl ________________________________ From: spacewalk-list-boun...@redhat.com<mailto:spacewalk-list-boun...@redhat.com> <spacewalk-list-boun...@redhat.com<mailto:spacewalk-list-boun...@redhat.com>> on behalf of Robert Paschedag <robert.pasche...@web.de<mailto:robert.pasche...@web.de>> Sent: Wednesday, December 7, 2016 11:48 PM To: spacewalk-list@redhat.com<mailto:spacewalk-list@redhat.com> Subject: Re: [Spacewalk-list] RHEL 6.x repository not syncing from parentchannel I think you should check your entitlements. But I also don't know, how you could "manually" connect to the repo (with username/password or token inline in URL). Is your server listed as entitled within your RedHat account? ________________________________ Von: Daryl Rose<mailto:darylr...@outlook.com> Gesendet: 06.12.2016 17:26 An: spacewalk-list@redhat.com<mailto:spacewalk-list@redhat.com> Betreff: Re: [Spacewalk-list] RHEL 6.x repository not syncing from parentchannel I decided to try the sync from the command line. This time I received an error: ERROR: Cannot retrieve repository metadata (repomd.xml) for repository: content_dist_rhel_server_6_6Server_x86_64_os_. Please verify its path and try again The path came out of the redhat.repo file that came from Red Hat when I registered the server. Its the same path that was used on the previous server. Any suggestions? Thank you. Daryl ________________________________ From: spacewalk-list-boun...@redhat.com<mailto:spacewalk-list-boun...@redhat.com> <spacewalk-list-boun...@redhat.com<mailto:spacewalk-list-boun...@redhat.com>> on behalf of Daryl Rose <darylr...@outlook.com<mailto:darylr...@outlook.com>> Sent: Monday, December 5, 2016 3:00 PM To: spacewalk-list@redhat.com<mailto:spacewalk-list@redhat.com> Subject: [Spacewalk-list] RHEL 6.x repository not syncing from parent channel I just realized that the last Red Hat errata for RHEL 6.x is from August. I looked at the sync logs and it doesn't appear that anything is syncing at all from the RHEL channel. I just recently migrated to a physical server. I successfully registered the server and attached an entitlement to the server. If I run "yum update" on the server, it lists latest updates from the RHEL channel. This is what I see in the reposync log: 2016/12/05 14:49:42 -05:00 Command: ['/usr/bin/spacewalk-repo-sync', '--channel', 'rhel-6-server-rpms', '--type', 'yum'] 2016/12/05 14:49:42 -05:00 Sync of channel started. 2016/12/05 14:49:42 -05:00 Repo URL: https:<rhel 6 rpm channel> 2016/12/05 14:49:42 -05:00 Sync of channel completed in 0:00:00. If I haven't received any syncs since August, then this broke long before I migrated to the physical server. Any thoughts? Daryl
_______________________________________________ Spacewalk-list mailing list Spacewalk-list@redhat.com https://www.redhat.com/mailman/listinfo/spacewalk-list
