Jim,
The obvious things to do are:
1. If you are behind a firewall, make sure proper settings are in place to allow the
DCC communications inbound/outbound on UDP port 6277. There are previous posts about
this as it is extremely important. Incorrect firewall settings cause excessive load on
the DCC server network.
2. In your SA config file, you might have to use:
use_dcc 1
dcc_path /your/path/to/dccproc
3. Run /your/path/to/cdcc 'info' and make sure it returns a list of available public
dcc servers.
John
-----Original Message-----
From: Jim Knuth [mailto:[EMAIL PROTECTED]
Sent: Wednesday, October 08, 2003 1:13 PM
To: SA-List
Subject: [SAtalk] DCC question
Hallo ,
I wont to know, why DCC not working.
I`ve just installed on my system. ( Debian 3.0 )
The output is:
X-Spam-Flag: YES
X-Spam-Checker-Version: SpamAssassin 2.60 (1.212-2003-09-23-exp)
X-Spam-Pyzor: Reported 11 times.
X-Spam-DCC: :
X-Spam-Level: *********************
X-Spam-Status: Yes, hits=21.1 required=3.5 tests=BAYES_99,DEAR_FRIEND,
NIGERIAN_BODY1,NIGERIAN_BODY2,NIGERIAN_BODY3,NIGERIAN_BODY4,
OFFSHORE_SCAM,OPPORTUNITY,PYZOR_CHECK,RAZOR2_CF_RANGE_51_100,
RAZOR2_CHECK,UPPERCASE_75_100,US_DOLLARS_3 autolearn=spam
version=2.60
--
Viele Grüße, best regards
Jim Knuth
[EMAIL PROTECTED]
----------
Zitat
----------
Vorsicht vor einem Weibe, welches logisches Denken offenbart! Denn Logik und das Weib
sind so heterogen, daß es Unnatur ist, wenn sie zusammen auftreten. [Johannes Cotta]
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
SourceForge.net hosts over 70,000 Open Source Projects.
See the people who have HELPED US provide better services:
Click here: http://sourceforge.net/supporters.php
_______________________________________________
Spamassassin-talk mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/spamassassin-talk
