Hi,

I don't know what my mail program does to the patch. When I
send it there is always a + sign too much in one line. So I attach
it as a file now. I hope this works, and once again sorry for the
confusion.

Regards
             Georg Chini
From: Georg Chini [EMAIL PROTECTED]

SBUS: Change IRQ-handler return value from 0 to IRQ_HANDLED and
fix some initialisation problems.
Change period_bytes_min from 4096 to 256 to allow driver to work with
low latency (VOIP) applications. Hope this does not break EBUS.

Signed-off-by: Georg Chini <[EMAIL PROTECTED]>

diff -uprN linux.orig/sound/sparc/cs4231.c linux/sound/sparc/cs4231.c
--- linux.orig/sound/sparc/cs4231.c     2006-12-29 22:08:10.000000000 +0100
+++ linux/sound/sparc/cs4231.c  2006-12-29 21:45:42.000000000 +0100
@@ -1268,7 +1268,7 @@ static struct snd_pcm_hardware snd_cs423
        .channels_min           = 1,
        .channels_max           = 2,
        .buffer_bytes_max       = (32*1024),
-       .period_bytes_min       = 4096,
+       .period_bytes_min       = 256,
        .period_bytes_max       = (32*1024),
        .periods_min            = 1,
        .periods_max            = 1024,
@@ -1288,7 +1288,7 @@ static struct snd_pcm_hardware snd_cs423
        .channels_min           = 1,
        .channels_max           = 2,
        .buffer_bytes_max       = (32*1024),
-       .period_bytes_min       = 4096,
+       .period_bytes_min       = 256,
        .period_bytes_max       = (32*1024),
        .periods_min            = 1,
        .periods_max            = 1024,
@@ -1796,7 +1796,7 @@ static irqreturn_t snd_cs4231_sbus_inter
        snd_cs4231_outm(chip, CS4231_IRQ_STATUS, ~CS4231_ALL_IRQS | ~status, 0);
        spin_unlock_irqrestore(&chip->lock, flags);
 
-       return 0;
+       return IRQ_HANDLED;
 }
 
 /*
@@ -1821,7 +1821,6 @@ static int sbus_dma_request(struct cs423
        if (!(csr & test))
                goto out;
        err = -EBUSY;
-       csr = sbus_readl(base->regs + APCCSR);
        test = APC_XINT_CNVA;
        if ( base->dir == APC_PLAY )
                test = APC_XINT_PNVA;
@@ -1862,17 +1861,16 @@ static void sbus_dma_enable(struct cs423
 
        spin_lock_irqsave(&base->lock, flags);
        if (!on) {
-               if (base->dir == APC_PLAY) { 
-                       sbus_writel(0, base->regs + base->dir + APCNVA); 
-                       sbus_writel(1, base->regs + base->dir + APCC); 
-               }
-               else
-               {
-                       sbus_writel(0, base->regs + base->dir + APCNC); 
-                       sbus_writel(0, base->regs + base->dir + APCVA); 
-               } 
+               sbus_writel(0, base->regs + base->dir + APCNC); 
+               sbus_writel(0, base->regs + base->dir + APCNVA); 
+               sbus_writel(0, base->regs + base->dir + APCC); 
+               sbus_writel(0, base->regs + base->dir + APCVA); 
+               
+               /* ACK any APC interrupts. */
+               csr = sbus_readl(base->regs + APCCSR);
+               sbus_writel(csr, base->regs + APCCSR);
        } 
-       udelay(600); 
+       udelay(1000); 
        csr = sbus_readl(base->regs + APCCSR);
        shift = 0;
        if ( base->dir == APC_PLAY )

Reply via email to