Eki napsal(a):
On Tue, Jan 02, 2007 at 04:03:25PM +0200, Eki wrote:
Hi!
It seems that 2.6.17 (or -stable 2.6.17.14) is the last working
kernel with E450, using Areca SATA RAID controller.
I tested a lot of newer kernel versions, 2.6.18, 2.6.19, some -rc's,
and the latest sparc-2.6 git tree as of 30th december, but none of them
will work correctly:
[EMAIL PROTECTED] [~] # uname -r
2.6.20-rc2-davem-061230
[EMAIL PROTECTED] [~] # modprobe arcmsr
ARECA RAID ADAPTER2: FIRMWARE VERSION V1.42 2006-10-13
scsi2 : Areca SATA Host Adapter RAID Controller( RAID6 capable)
Driver Version 1.20.00.13
arcmsr2: abort device command of scsi id=0 lun=0
arcmsr2: scsi id=0 lun=0 ccb='0xfffff800fc840000' poll command abort
successfully
arcmsr2: abort device command of scsi id=0 lun=0
arcmsr2: scsi id=0 lun=0 ccb='0xfffff800fc840240' poll command abort
successfully
arcmsr2: abort device command of scsi id=0 lun=0
arcmsr2: scsi id=0 lun=0 ccb='0xfffff800fc840480' poll command abort
successfully
scsi 2:0:0:0: scsi: Device offlined - not ready after error recovery
arcmsr2: abort device command of scsi id=1 lun=0
arcmsr2: scsi id=1 lun=0 ccb='0xfffff800fc8406c0' poll command abort
successfully
arcmsr2: abort device command of scsi id=1 lun=0
arcmsr2: scsi id=1 lun=0 ccb='0xfffff800fc840900' poll command abort
successfully
I found this thread from August, which seems to describe the same
problem I'm experiencing:
http://www.spinics.net/lists/sparclinux/msg00458.html
I've done as David S. Miller suggested, and booted the kernel with
"ofdebug=2"
I've attached "prtconf -lv" from a working 2.6.17.14 and non-working
2.6.20-rc2 kernels.
Anybody have any idea what's going on?
Thanks,
Eki
Hello,
Haven't seen any response on this issue yet. Doesn't anybody else have
similar problems with PCI-X cards on E450?
I have similar problem with E1000 external SCSI box attached to NCR PCI
SCSI controller. With older kernel work but with newer stop working. May
be problem is in SCSI layer not PCI-X specific.
Dan
-
To unsubscribe from this list: send the line "unsubscribe sparclinux" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
