Hi,
It's time for the monthly attempt to get Linux going
on my 4/330 - I[1] have convinced the kernel to boot
and spit kernel messages to a serial console or (via
promcon) to the 8-bit framebuffer (cgsix). It gets
as far as "Mounted root filesystem (NFS)", or whatever,
pulls:
nfsd[365]: 10.0.0.20 < /tftpboot/sbin/init
nfsd[365]: 10.0.0.20 < /tftpboot/lib/ld-linux.so
nfsd[365]: 10.0.0.20 < /tftpboot/etc/ld.so.cache
nfsd[365]: 10.0.0.20 < /tftpboot/lib/libc.so.5.3.12
down, and then sits there. This is rather similar
to the behaviour of the 2.0 kernels on my intel boxes
with the new /dev/console at (5,1), so I've tried
pointing console at tty (5,0), ttyN (4,N) and ttyS0
(4,64). With all of these, it's quite happy to print
kernel messages out, but won't print any output from
init (from the ultrapengiun installer, I think), or
ash (from the same), nor does any input (keyboard/
serial) seems to go anywhere.
I don't have a full cross-compiling setup (enough
for a kernel, but not enough libraries, &c.) but I'll
try to build an alternate init somehow - I was just curious
as to whether there's an obvious solution to this?
Matthew.
[1] Actually, the sun4 porting people, of course.
-
To unsubscribe from this list: send the line "unsubscribe sparclinux" in
the body of the message to [EMAIL PROTECTED]