Adam,
I had the same problem. It would work with 32M, filling up 8 slots.
Then I got an extra 4 simms and couldn't get it to work. Then again I layed my
hand on yet another 4 simms so I could fill all the 16 slots. That worked.
On 13-Mar-99 Adam Sulmicki wrote:
>
> Hello,
>
> I used to run Linx on my IPX, now I'm trying to replace it with
> sparc2.
>
> It currently has 32mb ram, I also took 4 other simms from an
> other sparc2 which I belive totals for extra 16mb ram.
>
> If I switch simm for simm in the sparc2 each of them work,
> but I try to add them all together I get various errors.
>
> Thus the question, what's the "right" way to add memory to
> sparc 2? I suspect the cpu uses 64bit databus and those simms
> are just 32bit or something like that. So I need to add them
> in correct order in right places. but what the correct order is?
>
> Any help? Siggestions? Hints?
>
> Thanks a lot,
> -Adam
> -
> To unsubscribe from this list: send the line "unsubscribe sparclinux" in
> the body of the message to [EMAIL PROTECTED]
---
Are you still an ALCOHOLIC?
Best regards, don't let the bits byte!
Ivo Naninck
~
~
wq!
-
To unsubscribe from this list: send the line "unsubscribe sparclinux" in
the body of the message to [EMAIL PROTECTED]
