Hey guys, I'm installing Ultrapenguin 1.1.9 (RedHat) on my secondary SCSI disk and I'm having problems to re-start the system. my original boot disk is /pci@1f,400/scsi@3/disk@0,0 where I have solaris installed. I added an external SCSI Seagate barracuda with 20 Gbytes (now it is over /pci@1f,400/scsi@3,1/disk@2,0) with the following partition table: /dev/sdc1 500MB for /Packages /dev/sdc2 100Mb for swap /dev/sdc3 whole disk /dev/sdc4 for / ** NOte..the disk looks in sdc because I have already a secondary INTERNAL disk on my first PCI bus, also running under solaris. The instalation worked okay, without problems. So..I got everythhing installed and I put SILO under my linux root partition (on sdc4). when I type "boot /pci@1f,400/scsi@3,1/disk@2,0:d" I got SILO: prompt, as it must be. When I type then ENTER, the system hangs up telling "kernel panic" and root not mount on fs. WHY ????????? The CPU is a Sparc Ultra60 (please, don't tell me that the hardware is unsupported !!) Could someone help me ?? Andre -- Andre L. Belem Alfred-Wegener Insitut f�r Polar- und Meeresforschung Postfach 12 01 61 D-27515 Bremerhaven Phone: +49-471-4831-809 FAX : +49-471-4831-425 - To unsubscribe from this list: send the line "unsubscribe sparclinux" in the body of the message to [EMAIL PROTECTED]
