Wolfgang Ganzert wrote:
> Hello,
>
> excuse me please if this is not the correct mailing list, but I did not
> find a better corresponding one.
>
> I am a user of RH 6.0 Linux on Sparc Classic X systems. The Sparcs are five
> years old and I got them for free. Now I want to upgrade the hardware but I
> do not know which RAM modules have to be installed.
>
> On the Sun web site I did not find a page indicating which modules (EDO or
> FPM, with or without parity, maximum capacity) have to be installed.
>
> Please can anyone point me in the right direction to a Sun hardware
> description?
FPM 16MB 60ns 36 bits are good ones (grouped by 2). I installed 2 of them in
my SparcClassic.
btw, you need at least 33bits SIMM modules (36 bits works) and 60ns.
I guess they don't support more than 16MB modules because the total amount of
memory could only be up to 96MB on 6 slots.
4MB SIMM modules are also working, but don't know about 2 or 8MB ones.
Regards.
--
Eric Delaunay | "La guerre justifie l'existence des militaires.
[EMAIL PROTECTED] | En les supprimant." Henri Jeanson (1900-1970)
-
To unsubscribe from this list: send the line "unsubscribe sparclinux" in
the body of the message to [EMAIL PROTECTED]
