On Sat, 9 Oct 1999, Mark Nejedlo wrote:
The first one, tnx for answering! :-)
> > When I jump over the HUB (a crossed 10baseT cable), it works very, very,
> > well...! But another machines (x86) with Linux works connected to the HUB,
> > only the Sun breaks...
> Given this, I would reccomend
> 1. try a different ethernet cable between the sun and the hub.
> 2. try a different hub port
:-)
Problem disappeared when changed the HUB pos 15th by the 12th one!
Thank you for the suggestion! :-)
Now all is right... ftp, http, etc, etc.. I can begin to work
fine!
> Also, did you start having this problem as soon as you went to linux on that
> machine? Given that it worked with the crossover cable I would be slow to
> blame your sparc.
Well.. the problem was when I installed Linux, but at some time I
changed the position of the machine... and the cable/hub position..
Now I'll test the 15 position of HUB, to isolate it if bad!
I repeat... very very tnx :-)
Saludinos de Laz
----------------
[EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL PROTECTED] <--- SOLO para mensajes al telefono movil
----------------------> Powered by RedHat 6.0 <-----------------------------
-
To unsubscribe from this list: send the line "unsubscribe sparclinux" in
the body of the message to [EMAIL PROTECTED]
