>I have both an IPC and Sparc1 that I am trying to get RH 6.0 installed
>on and with both systems I get all of the way through the install and it
>is to the point where it tells me a log of the install will be kept and
>I press OK and then the box goes away and the screen stays blue and
>nothing happens.  I thought, well, maybe the system is just extra slow
>so I left it there overnight with the same results.
>
>Any ideas?

Yes, the kernel is spending 99.9% of its time thrashing the page look-up
table. This means that hardly anything is getting done of the install. If you
were to wait a number of years it would probably complete.

Here's a workaround:-

        Stuff as much memory into the machines as possible, preferably in
                contiguous banks. (Though the IPC won't be able to hold enough
                memory to totally get rid of the problem. You really need the
                SS1 fully loaded to 64MB to be useful with RH6.0 install.)

        Install the absolute minimum from the install program, ie. enough to
                bootstrap loading RPMs once you've got a bootable system.

I've discovered this through many days/weeks of trial and error. In the end I
found the machines too slow to be useful and the boxes are now running Solaris
7, which is running at least twice to three times the speed!

Steve

-- 
---------------------------------------------------------------------------
Computer Systems Administrator,                E-Mail:[EMAIL PROTECTED]
Department of Earth Sciences,                     Tel:-  +44 (0)1865 282110
University of Oxford, Parks Road, Oxford, UK.     Fax:-  +44 (0)1865 272000
-
To unsubscribe from this list: send the line "unsubscribe sparclinux" in
the body of the message to [EMAIL PROTECTED]

Reply via email to