It turns out that our ACS server was not passing the proper privilege level. For some reason this didn't bother our 6500 series switches but it did impact all other devices. Once we specified the EXEC privilege was 15 (even though it should have been without manually setting it) everything started working... Thanks, C. Matthew Crocker Phone: (423) 751-8522 Mobile: (423) 593-2116 Fax: (423) 751-2296 E-Mail: [EMAIL PROTECTED]
________________________________ From: Kuta Pavel [mailto:[EMAIL PROTECTED] Sent: Friday, September 19, 2008 11:01 AM To: Crocker, Charles Matthew Subject: RE: [spectrum] NCM and Cisco Devices Do u use these switches set up as L3 switches on IOS? ________________________________ From: Crocker, Charles Matthew [mailto:[EMAIL PROTECTED] Sent: Wednesday, September 10, 2008 6:23 PM To: spectrum Subject: [spectrum] NCM and Cisco Devices We are using NCM and it works flawlessly on Cisco 6500 series switches but other Cisco switches (e.g. 3500 series, 4500 series) the results is always "Cause of Failure: Capture failed" Anybody got any ideas? Thank You, C. Matthew Crocker, CCNA, CCDA ------------------------------------------------------------ Real Time Process Systems Specialist Tennessee Valley Authority Transmission and Reliability Organization Configuration Management MR 1A - C Phone: (423) 751-8522 Fax: (423) 751-2296 E-Mail: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> * --To unsubscribe from spectrum, send email to [EMAIL PROTECTED] with the body: unsubscribe spectrum [EMAIL PROTECTED] __________ Informace od ESET NOD32 Antivirus, verze databaze 3455 (20080919) __________ Tuto zpravu proveril ESET NOD32 Antivirus. http://www.eset.cz __________ Informace od ESET NOD32 Antivirus, verze databaze 3455 (20080919) __________ Tuto zpravu proveril ESET NOD32 Antivirus. http://www.eset.cz --- To unsubscribe from spectrum, send email to [EMAIL PROTECTED] with the body: unsubscribe spectrum [EMAIL PROTECTED]
