Hi, You will have to change the timeout value if you have slow connectivity or very large config-files..
Regards, Christian Schneider Enterprise Service Specialist 4-tune GmbH Sägereistrasse 29 CH-8152 Glattbrugg http://www.4-tune.ch [email protected] Office ZH: +41 (0)44 818 02 03 Office SG: +41 (0)71 930 07 00 Mobile: +41 (0)79 418 4542 Fax: +41 (0)71 930 0701 On 20.01.2010, at 23:53, [email protected] wrote: > > Hi Spectrum Group, > > I had to reinstall my Spectrum environment, so I took advantage of that to > installed Spectrum 9.0. > > After, I had installed Spectrum on Solaris, I procceded to install a TFTP > server and probe it. The TFTP server works very fine and when I rediscover > some Cisco and Enterasys devices I tried to probe the Spectrum Configuration > Manager in order to capture the device confguration, it worked very fine for > so little devices and the majority of them failed and display the below error > message: > > ******************************************* > The file transfer on the device timeout. The network my be overloaded, or the > TFTP server on the SpectroSERVER machine may not be running or responding. > ******************************************* > > I belive that the TFTP server is not the problem because I could capture some > Cisco and Enterasys devices configuration, and the SNMP configuration in the > device is not the problem too, because of it was working before I reinstalled > Spectrum. > > Anyone that has a suggestion how to fix that issue, will be very appreciated. > > Atentamente, > Víctor Barrionuevo > Dirección de Informática - Redes y Soporte > Banco Central del Ecuador > Av. 10 de Agosto N11-539 y Briceño > Teléf: (593) (2) 2572522 Ext. 2416 > > --To unsubscribe from spectrum, send email to [email protected] with the body: > unsubscribe spectrum [email protected] --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
