Jay- The first thing that comes to my mind is NAT. We¹ve found that, if the address you use to access the device isn¹t configured on the device (because it¹s a NAT address), Spectrum will discard the device under certain conditions. If you¹re doing any sort of range discovery, it will discard the device. However, if you list individual addresses in the discovery configuration, or if you use the ³Create by IP² or ³Create by hostname² options in the topology view, then Spectrum will skip the address check and create the device anyway. (At least this has been my experience on 9.0 and 9.1.)
Beyond that, you could enable discovery debug, which is in the ³AutoDiscovery Control² section of the VNM model. I¹ve been very impressed with the detail and readability of the files this produces. HTH, Jim -- JIM PFLEGER | Application Architect | Insight Networking | insight.com o. 480.889.9680 f. 480.889.9599 [email protected] The information contained in this message and any attachment may contain privileged or confidential information protected from disclosure. If you are not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any review, dissemination, distribution or copying of this information is strictly prohibited. If you have received this transmission in error, please notify the sender immediately by replying to this message and destroying the original and all copies. Thank you. On 1/20/10 3:19 PM, "Lentz, Jay" <[email protected]> wrote: > Strange problem. I can ping and poll a device from my Spectrum server without > a problem. > When I run a discovery on the device, no device is found using ping (ICMP) or > SNMP. Not sure how to troubleshoot this. > > Thoughts, > > TIA > ----------------------------------------------------------------- > This message may contain DynCorp International Privileged/Proprietary > information. If this email is not intended for you, and you are not > responsible for the delivery of this email message to the addressee, do not > keep, copy or deliver this email message to anyone. Please destroy this email > in its entirety and notify the sender by reply email. Your cooperation is > appreciated. > ----------------------------------------------------------------- > * --To unsubscribe from spectrum, send email to [email protected] with the > body: unsubscribe spectrum [email protected] > --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
