SNMP read / write is required to use Spectrum SPM to create the tests. It performs an SNMP Write to create the test each time it is run so you will need to set the string to a Write one. If you can create the test on the devices itself - for example on a Cisco SAA enabled device - then you can discover the test, however the naming conventions used in discovering a created test are not that helpful.
On Wed, Jun 16, 2010 at 11:05 PM, Rajani_Bayapati < [email protected]> wrote: > Hi , > > > > For URL monitoring(HTTP) ,Is snmp community read/write both required ? I > attempted to add one URL in Switch/Router it is giving following error. Can > anyone help me out what steps we would take to add one URL for monitoring in > SPM. > > > > > > > > Regards > > Rajani Boyapati > > > > > > ------------------------------ > DISCLAIMER: > This email (including any attachments) is intended for the sole use of the > intended recipient/s and may contain material that is CONFIDENTIAL AND > PRIVATE COMPANY INFORMATION. Any review or reliance by others or copying or > distribution or forwarding of any or all of the contents in this message is > STRICTLY PROHIBITED. If you are not the intended recipient, please contact > the sender by email and delete all copies; your cooperation in this regard > is appreciated. > > - --To unsubscribe from spectrum, send email to [email protected] with > the body: unsubscribe spectrum [email protected] > > --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
<<image001.png>>
