We were using Looper-NG (http://muthanna.com/looperng/) long before we had Spectrum or eHealth, and we continue to use it today. I like it a lot because we can slice and dice traps (in Perl) on their way by so we can do some data cleanup there instead of in the EventDisp files, which can be tricky. We can also use it as the single receiver to configure on managed devices, and then fan traps out to all our production and dev systems, which is the problem you're trying to solve.
HTH, Jim On 2/18/11 2:32 PM, "Joni Keller" <[email protected]> wrote: > Back in the days when you could buy trapexploder without the cost of buying > the rest of the eHealth suite, I would have seconded that recommendation. > We bought trapexploder way back when we had devices that couldn't send to > as many trap receivers as we wanted. I keep telling my CA team that they > should never sell a copy of Spectrum without a copy of trapexploder, at > least not if the customer is going to install Spectrum fault tolerant. I > forward non-junk traps to all of my Spectrum servers so it doesn't matter > if it's not running on the primary. I also convert some traps into email > as requested. But enough of that ... > > Take a look at http://www.net-snmp.org/docs/man/snmptrapd.conf.html and > jump down to "forward OID" -- I have never done this, but I think you can > forward traps with the (free) net-snmp package. > > HTH, > - Joni > > --On February 14, 2011 4:59:23 AM -0500 Marcel Schulte > <[email protected]> wrote: > >> Hi list, >> >> we have several snmp devices sending traps to only a limited number of >> receivers. >> >> Because of this we'd like to force them to send the traps to a third >> IP only which then duplicates the traps to our two FT nodes. >> >> Did anyone of you do something like this? What would be the best way >> to get this working? >> >> Many thanks in advance! >> >> Regards, >> Marcel > > > > > > --- > To unsubscribe from spectrum, send email to [email protected] with the body: > unsubscribe spectrum [email protected] --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
