If you are trying on Cisco Devices, try adding "ip tftp source-interface <interface>".
Carlos Torrejón Arias 2011/5/18 CATools Helpdesk <[email protected]> > Hi All, > > > > One of my device is showing *“device reported no config error”* while > capturing Host Configuration in spectrum. > > I have configure everything properly but still getting same error. > > > > My rest devices are working fine & NCM is happening properly. > > > > Can anyone help me on this? > > > > *Thanks & Regards, * > > *Subhash Mahakal* > > *Phone: 020-40122067* > > > > > > *Please do not print this email unless it is absolutely necessary. Use > less paper - Save Tree - make "IT" a "Greener" Tomorrow.* > > - Disclaimer-- > > This email and any files transmitted with it are confidential and may be > privileged or otherwise protected from disclosure and are intended solely > for the use of the entity / individual to whom they are addressed. If you > have received this email in error or If you are not the intended recipient, > please notify the sender immediately by way of telephone or email and delete > this message and any files transmitted from your system. Please note that > any views presented in the email are solely those of the author and do not > necessarily represent those of the organization. While all care has been > taken to avoid viruses the recipient is advised to check this email and > attachments for presence of viruses. The organization accepts no liability > on this account. > > - --To unsubscribe from spectrum, send email to [email protected] with > the body: unsubscribe spectrum [email protected] > > --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
