Hi, 1) Check all points of failure: - Double check you have configure TFTP server parameters in Configuration Manager Information tab. And TFTP server is running in your SpectroServer. - Double check you have RW community for the device and the device belongs to the right Device Family. - Try to telnet to the device and run a manual copy run tftp. - Use wireshark to monitor SNMP sets and TFTP transfer. - While running a host config capture, monitor tftpboot folder to see if file is created and it's growing. - Check NCM_TFTP_Host attribute (in case your SS IP is NAT in the device side). If SS has multiple NICs Spectrum uses primary NIC IP as TFTP server.
2) For latency, you can use SPM. For utilization and errors you need other tool: eHealth, QoS Voyant, CACTI... Regards. James. On Thu, Jun 16, 2011 at 1:34 PM, Lemmermann, Jan <[email protected]> wrote: > Hi Subhash, > > > > regarding your points: > > > > 1) I assume you have done all the required steps to configure NCM that > are listed in the documents. > If yes… can you give us some details? What kind of devices are u using? To > which DeviceFamily do those devices belong? > What error do you see? Check the events on the NCM or DeviceFamily models. > > 2) I’m not sure if I understand your questions but take a look into the > Spectrum Performance Manager (SPM) guide. > You can use it to run remote tests on hosts like Cisco routers which support > IP SLA. SRM can report on the SPM test results. > > > > Cheers, > > Jan Lemmermann > > > > Von: CATools Helpdesk [mailto:[email protected]] > Gesendet: Donnerstag, 16. Juni 2011 12:49 > An: spectrum > Betreff: [spectrum] NCM capture fail in 9.2 > > > > Hi All, > > > > 1). We have discovered some devices on Spectrum 9.2 new setup & gone through > Spectrun_Network_Configuration_User_Guide.pdf but not able to capture Host > > Configuration which is showing some errors. > > Is there any configuration required? > > 2). Can we get throughput from report manager between Node-A to Node-B (for > link utilization, latency)? > > > > > > Thanks & Regards, > > Subhash Mahakal > > Phone: 020-40122067 > > > > > > Please do not print this email unless it is absolutely necessary. Use less > paper - Save Tree - make "IT" a "Greener" Tomorrow. > > - Disclaimer-- > > This email and any files transmitted with it are confidential and may be > privileged or otherwise protected from disclosure and are intended solely > for the use of the entity / individual to whom they are addressed. If you > have received this email in error or If you are not the intended recipient, > please notify the sender immediately by way of telephone or email and delete > this message and any files transmitted from your system. Please note that > any views presented in the email are solely those of the author and do not > necessarily represent those of the organization. While all care has been > taken to avoid viruses the recipient is advised to check this email and > attachments for presence of viruses. The organization accepts no liability > on this account. > > --To unsubscribe from spectrum, send email to [email protected] with the > body: unsubscribe spectrum [email protected] > > --To unsubscribe from spectrum, send email to [email protected] with the > body: unsubscribe spectrum [email protected] --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
