Hi Stephen, Interesting -- I don't have any Peribits around, but I was able to generate this alarm in our lab. It seems to be a new alarm in 9.2 and would seem to indicate that the device isn't modelled correctly - as per the event message, the community name and the network address are different between the device model and the interface model.
I was able to generate the same alarm by changing the community string and IP address of the interface model. <!--40-->Minor <!--1312407092000 15784272-->3-Aug-2011 5:31:32 EDT PM xxx.rbc.com As a result of an external communication request sent by an application or port model named LAB_IPC-SW2.rns.fg.rbc.com_Fa1/38, its contact status was found to be different than its parent device contact status, which it should mirror as it is not polled on its own. It was found that at least one of the attributes shown below differ between the model and its parent device. Please examine these attributes to check if any of these differences may explain the mirroring failure. Attributes SNMP community string, Network address of device model differ with application or port. Regards, ...rod -----Original Message----- From: Stephen Boshoff [mailto:[email protected]] Sent: August 3, 2011 1:14 PM To: spectrum Subject: RE:[spectrum] Spectrum and Juniper (Peribit) Importance: Low Hi All Has anyone got an idea of the meaning of the event 0x10f81 reported by a router, and if there is any relation to that an a peribit device. The actual message is Major 02 Aug 2011 4:25:39 PM PKBRWD01_1 As a result of an external communication request sent by this model, its contact status was found to be different than the one on its parent device, but it should mirror the parent's contact status. It was found that at least one of the attributes shown below differ between this model and its parent device. Please examine these attributes to check if any of these differences may explain the mirroring failure. Model attributes Network address : 147.11.85.241 Secure domain address : Agent port : 161 SNMP community string : public DCM timeout : 3000 Parent device attributes Network address : 147.11.94.234 Secure domain address : Agent port : 161 SNMP community string : test101 DCM timeout : 3000 System 02 Aug 2011 4:25:39 PM System Gen_IF_Port 0x10f81 _______________________________________________________________________ This email may be privileged and/or confidential, and the sender does not waive any related rights and obligations. Any distribution, use or copying of this email or the information it contains by other than an intended recipient is unauthorized. If you received this email in error, please advise the sender (by return email or otherwise) immediately. You have consented to receive the attached electronically at the above-noted email address; please retain a copy of this confirmation for future reference. Ce courriel est confidentiel et protégé. L'expéditeur ne renonce pas aux droits et obligations qui s'y rapportent. Toute diffusion, utilisation ou copie de ce courriel ou des renseignements qu'il contient par une personne autre que le (les) destinataire(s) désigné(s) est interdite. Si vous recevez ce courriel par erreur, veuillez en aviser lexpéditeur immédiatement, par retour de courriel ou par un autre moyen. Vous avez accepté de recevoir le(s) document(s) ci-joint(s) par voie électronique à ladresse courriel indiquée ci-dessus; veuillez conserver une copie de cette confirmation pour les fins de reference future. --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
