----- Original Message ----- > Does Spectrum NFM employ a dynamic polling interval (i.e. poll less > frequently during times of relative stability, and more frequently > when the monitored model is suspected to be down, such as following > one or more missed polls)? I thought I remember reading this, but > cannot find the source.
There is a 'hibernate' state for a model when Spectrum polls less frequently and checks if the device is down. After 2 succesive succesful polls, the device is polled normally and state is changed to 'Normal'. It's similar to 'maintenance', but checks every 3rd poll cycle (I think) if the device responds. For Maintenance, you can set a schedule, so the device will not be polled during an interval and then polled again after the interval has passed. I don't remember to be an option of this kind of polling throttling, dynamically, during a normal device status. It could be possible using Watches (based on the state of the model - i.e. contacted or not/up or down) to modify the pollInterval and dynamically adjust it. regards, -- Cristi Mitrana --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
