Hello Marcio, In order to be able to run something on SpectroServer FROM another machine, you will need to use a third party software (like psexec) to allow you to run apps and see the output. It is not always easy to set this up because the command line syntax is not always straight forward; multiple parameters had to be used and it always need some good trial and error.
One of Spectrum Manuals - OneClick Customization - has detailed instructions on how to add a menu element to run an application. Follow that first to have your menu item in place. Try after that in a cmd prompt the whole command to get your trace route properly executed via psexec. Once you figured out the correct command line, put that in OneClick and it will work. Be aware that psexec sometimes will hang without obvious reason. Good luck, Eugen -----Original Message----- From: Marcio Augusto Alvarez [mailto:[email protected]] Sent: Tuesday, 20 September 2011 11:10 PM To: spectrum Subject: [spectrum] Customizing OneClick Hi List, I'd like to know how can I create a customized tracert command option on Oneclick Menu Toolbar. But the most important thing, the source of this command must be the SpectroServer not the OneClick server or user machine. Regards, Marcio Alvarez TM Solutions --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected] --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
