Hi list, does anybody has experience in modelling a CISCO ACE (load balancer) and all of its contexts. The problem is that the Cisco Ace is using some kind of virtualisation. That means an Ace has its own admin context and a context for each load balancing environment. Each of these contexts has its own ip address. So I'm able to model the admin context and each of the load balancing contexts - but Spectrum has no association between them. So during modelling the different contexts spectrum raises an "DUPLICATE MAC WITH DIFFERENT IP DETECTED" alarm on all contexts on the same box. And if the box will fail, there would be several "DEVICE HAS STOPPED RESPONDING TO POLLS" alarms. But for modelling the whole environment it is necessary to model all the contexts because each of the contexts has its own interfaces.
The environment has a similar behaviour like a VMWare ESX Server and its virtual hosts! Any experience or ideas!? Thanks in advance! Regards, Markus Gatty LINZ AG TELEKOM Übertragungstechnik Carrier-Netzwerk Die LINZ AG TELEKOM ist ein Geschäftsbereich der LINZ STROM GmbH für Energieerzeugung, -handel, -dienstleistungen und Telekommunikation. 4021 Linz, Wiener Straße 151, Austria Mobil: +43(0)664/80340-5753 Tel.: +43(0)732/3400-5753 Fax: +43(0)732/3400-155753 E-Mail: [email protected] Internet: http://www.linzag-telekom.at<http://www.linzag-telekom.at/> FN 199533 g des Landesgerichtes Linz LINZ AG TELEKOM ist nach ISO 9001, OHSAS 18001, ISO 27001<http://www.linzagtelekom.at/zertifizierung> zertifiziert. ------------------------------------------------------------------------------------------ LINZ AG für Energie, Telekommunikation, Verkehr und Kommunale Dienste A-4021 Linz, Wiener Straße 151, Postfach 1300, Tel. +43/732/3400-0, E-Mail: [email protected] ------------------------------------------------------------------------------------------ --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
