Hello Paulo,
Make sure you are not running into a “Trap based autodiscovery” loop. 1. Device that is not discovered traps to Spectrum 2. Spectrum attempts to auto-discover the device - but it is not in the SNMP access list, or it uses the wrong SNMP credentials 3. Device traps to Spectrum about invalid SNMP access 4. goto 2 This will prevent other discoveries from occurring. Try turning it off temporarily, if it is turned on. Device reconfigurations may also cause this, as some actions are a “partial” discovery. I don’t recall specifics at this moment. HTH, --Mark S ________________________________ Mark Serencha – Inforonics Global Services, LLC – (m) +1-781-439-0519 – Mark.Serencha_AT_inforonics.com <mailto:[email protected]> From: Paulo A Ferreira [mailto:[email protected]] Sent: Monday, December 10, 2012 12:16 PM To: spectrum Subject: [spectrum] Stopping a discovery process Is there a way to stop a discovery process ? Thank you! Paulo · --To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected] --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
<<image001.png>>
