Hi Ferey, I have experienced the same sometime ago. According to my research, the "6" indicates it is an enterpriseSpecific trap, and it is present in the traps received by Spectrum. I haven't searched why it's not handled correctly by Spectrum, but it's probably a Mib specification issue. I have handled it through the AlertMap file as well, and it's running well. You need of course to handle every trap you want to receive individually.
Best regards, Christian De : Fereydoon Mallahi Karai <[email protected]> A : "spectrum" <[email protected]> Date : 11.10.2013 04:00 Objet : [spectrum] Adding digit number 6 to the trap Hi, I have added a UPS and its MIB file to Spectrum and mapped its traps to the events in MIB tools but when i generate an alarm on the UPS and check the event of the added device in OneClick, i see "Unknown" traps. After some investigation and comparing the coming traps with the ones in the MIB tools, i found that coming traps shown in OneClick event view, has one digit more. Spectrum adds digit number "6" before the last digit of the trap. The UPS is using SNMP version one. I don't know why Spectrum adds that digit number. When i add manually the digit number 6 to the trap in the AlertMap file, The alarm is shown in Spectrum. I will appreciate if you help me to find a solution for that. Thank you. Regards, Ferey --To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected] --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
