Classification: UNCLASSIFIED Caveats: NONE
Good Morning, I am trying to explore the options within NCM and I am getting stuck with the PERL/Upload firmware portion. Currently all the devices are in the Cisco IOS-SSH family and the capturing and uploading of the Config files has been running smooth. When I initially upload the firmware it is disallowed with the error of "Operation is not available. If the device supports this operations, a script must be configured". Next, Device family --> Information --> Device Firmware Transfer Settings --> Load Device Firmware Script and load "Cisco NX OS Upload_Script" (Does not exactly match my C3745-AdventerpriseK9-M, Version 12.4(12) but I do not have really any other choice). I go to upload firmware task again and this time it is allowed. Click on continue, Save and then Upload Firmware. Receive an error: "Load Firmware Script Return Error [255]: usage error" This is where I get stuck. I suspect that I need to add something to the Additional Script Parameters but I am not sure what to add there and I have no idea how the PERL script works or how to debug it if there is an error. I am used to be able to break scripts or do a line by line step through to find out what is happening. On top of all this, I have multiple vendors in the network environment and I need scripts to get these other devices working (Junipers, Brocades, Avaya, Estasys, etc.) The documentation for NCM is good in certain areas, then it just drops off into an abyss. I greatly appreciate any and all help in this. Thanks Stephen Classification: UNCLASSIFIED Caveats: NONE --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
