Thanks for your help. great Best Regards, Amitay. __________________
-----Original Message----- From: Waldemar Wiesner [mailto:[email protected]] Sent: Thursday, August 27, 2015 12:01 PM To: spectrum Cc: spectrum Subject: [spectrum] AW: [spectrum] Getting the parent IP address Hello Amitay, each interface has 2 attributes with ip addresses: ip_address (0x12dbb) - The ip address of the interface Network_Address (0x12d7f) - ip address of the device (needed for polling) Please check, if the Network_Address attribute on your devices contains the required ip address. The mh of the parent device is stored in the attribute Device_Mdl_Handle(0x10069). Kind Regards Waldemar -- Waldemar Wiesner Geschäftsführer DICOS GmbH Kommunikationssysteme Alsfelder Straße 11 D-64289 Darmstadt T: +49 6151 82787 25 M: +49 1761 82787 25 F: +49 6151 82787 59 W: http://dicos.de PGP key: http://dicos.de/pgpkeys key fingerprint: 6B8F 3A83 5492 A643 E6D5 CFB4 DB2A 8B5C 8731 0A4D DICOS GmbH Kommunikationssysteme, Alsfelder Straße 11, 64289 Darmstadt Sitz der Gesellschaft: Darmstadt, Amtsgericht Darmstadt HRB 7024 Geschäftsführer: Dr. Winfried Geyer, Stephan Hesse, Waldemar Wiesner > -----Ursprüngliche Nachricht----- > Von: Amitay Ben-ishay [mailto:[email protected]] > Gesendet: Donnerstag, 27. August 2015 06:38 > An: spectrum > Betreff: RE: [spectrum] Getting the parent IP address > > Hi, > Thanks for the suggestions. > > As I mention, I want to use it in the setScript of the notifier. > I don't want to make a connect each time - it takes a lot of time > since I need to open a new connect on each relevant alarm > > BTW - in my case the port name has nothing to do with the device name. > > Best Regards, Amitay. > __________________ > > -----Original Message----- > From: wiedel [mailto:[email protected]] > Sent: Wednesday, August 26, 2015 9:55 PM > To: spectrum > Cc: spectrum > Subject: Re: [spectrum] Getting the parent IP address > > Hi Amitay, > I came up with two methods of getting the parent's IP address from > the port name > but neither are very pretty. Both require some parsing. > > Example using port name XYZ-S8.usc.edu_7143 Note that port names are > the name of the parent device with an underbar followed by a port > number. (_7143) > > ***Using CLI: > Prompt> <$SPECROOT>/vnmsh/connect > Prompt> <$SPECROOT>/vnmsh/show models mname=XYZ-S8.usc.edu_7143 | grep > _ > 0x4e5fa7 XYZ-S8.usc.edu_7143 0x220011 Gen_IF_Port > Prompt> <$SPECROOT>/vnmsh/show attributes attr=0x1027f mh=0x4e5fa7 | > Prompt> grep _ > 0x1027f Legacy_Network_Address > 172.16.0.10 > > {The two greps just eliminate the title lines, leaving just the > useful information lines.) You need to extract the first 8 characters > of the output of the "show models" command (0x4e5fa7) to stick in as > the model handle of the second command (show attributes). > > ***Using operating system command: > Start with the port name: XYZ-S8.usc.edu_7143 Chop off the _ and > everything after it. > issue one of several relevant OS commands: > > host XYZ-s8.usc.edu > XYZ-S8.usc.edu has address 172.16.0.10 > > ypmatch xyz-s8.usc.edu hosts > 172.16.0.10 xyz-s8.usc.edu xyz-s8 > > nslookup xyz-s8.usc.edu > Server: xyz-s8.usc.edu > Address: 172.16.0.10 > > Different operating systems use different variants. > > The hard thing here is writing a script that does the parsing of the > commands then extracting the relevant things you need. > > Enjoy! > > > James Wiedel > Director of Network Engineering & Telecommunications University of > Southern California [email protected] > > > > > Amitay Ben-ishay wrote: > > Hi, > > > > Can anyone help with this issue? Or most of you are in vacation? > > > > > > > > Best Regards, Amitay.** > > > > *__________________* > > > > > > > > *From:* Amitay Ben-ishay > > *Sent:* Monday, August 24, 2015 7:18 PM > > *To:* spectrum > > *Subject:* [spectrum] Getting the parent IP address > > > > > > > > Hi all members, > > > > I'm facing an issue regarding interfaces. > > > > Sometimes I get an alarm from an interface itself - this alarm has > > NO IP address since its on the interface. > > > > I would like to get the parent address (device) in my notifier. > > > > How can I get it done? > > > > > > > > Once I used a tool called parent_find which I don't know how I got > > it and it starts to make problem with my SS version so I need to > > replace this solution. > > > > > > > > Best Regards, Amitay.** > > > > *__________________* > > > > *Amitay Ben-Ishay** > > **Senior Software Architecture** **& Product* *Manager*** > > > > cid:[email protected] > > > > > > > > > > > > *Work*: +972-54-7814588 > > *Mobile*:+972-54-9909149 > > > > *Fax*: +972-153-54-9909149 > > > > *Email*: [email protected] > > <mailto:[email protected]> > > > > *LinkedIN*: Amitay's Profile <http://www.linkedin.com/in/amitay> > > > > > > > > P please consider the environment before printing this email** > > > > > > > > > > > > ------------------------------------------------------------ > > This message contains information that may be confidential or > privileged. > > If you are not the intended recipient, you may not use, copy or > > disclose to anyone any of the information in this message. If you > have > > received this message and are not the intended recipient, kindly > > notify the sender and delete this message from your computer. > > > > * --To unsubscribe from spectrum, send email to [email protected] > > <mailto:[email protected]> with the body: unsubscribe spectrum > > [email protected] > > <mailto:[email protected]> > > > > ------------------------------------------------------------ > > This message contains information that may be confidential or > privileged. > > If you are not the intended recipient, you may not use, copy or > > disclose to anyone any of the information in this message. If you > have > > received this message and are not the intended recipient, kindly > > notify the sender and delete this message from your computer. > > > > * --To unsubscribe from spectrum, send email to [email protected] > > <mailto:[email protected]> with the body: unsubscribe spectrum > > [email protected] > > > > --- > To unsubscribe from spectrum, send email to [email protected] with the > body: unsubscribe spectrum [email protected] > ------------------------------------------------------------ > This message contains information that may be confidential or > privileged. > If you are not the intended recipient, you may not use, copy or > disclose to anyone any of the information in this message. If you have > received this message and are not the intended recipient, kindly > notify the sender and delete this message from your computer. > > > --- > To unsubscribe from spectrum, send email to [email protected] with the > body: unsubscribe spectrum [email protected] --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected] ------------------------------------------------------------ This message contains information that may be confidential or privileged. If you are not the intended recipient, you may not use, copy or disclose to anyone any of the information in this message. If you have received this message and are not the intended recipient, kindly notify the sender and delete this message from your computer. --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
