Hi Roberth, create a watch with datatype boolean an try following expression:
( ( ifSpeed.# == SEBIfSpeedThreshold ) | ( ifSpeed.# == 0 ) ) And set threshold to "violated if value != TRUE Kind Regards Waldemar -- Waldemar Wiesner Geschäftsführer DICOS GmbH Kommunikationssysteme Alsfelder Straße 11 D-64289 Darmstadt T: +49 6151 82787 25 M: +49 1761 82787 25 F: +49 6151 82787 59 W: http://dicos.de <http://dicos.de/> PGP key: http://dicos.de/pgpkeys <http://dicos.de/pgpkeys> key fingerprint: 6B8F 3A83 5492 A643 E6D5 CFB4 DB2A 8B5C 8731 0A4D DICOS GmbH Kommunikationssysteme, Alsfelder Straße 11, 64289 Darmstadt Sitz der Gesellschaft: Darmstadt, Amtsgericht Darmstadt HRB 7024 Geschäftsführer: Dr. Winfried Geyer, Stephan Hesse, Waldemar Wiesner Von: [email protected] [mailto:[email protected]] Gesendet: Freitag, 2. Oktober 2015 13:39 An: spectrum Betreff: [spectrum] SPectroWatch help I have to create a watch that monitors that IfSpeed is set to 1GB an all NICs. So.. I created a watch “SEBIfSpeedThreshold” with expression 1000000000 And one watch “SEBifSpeed” with expression ifspeed.# that checks all instances AND compared with SEBIfSpeedThreshold as threshold. The above works fine… But unused NICs present themselves with IfSpeed 0, which result in an alarm L So how can I write the expression so that it ignores all instances that have 0’s…? Help anyone? /Roberth * --To unsubscribe from spectrum, send email to [email protected] <mailto:[email protected]> with the body: unsubscribe spectrum [email protected] <mailto:[email protected]> --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
