Hi, I want to upgrade the IOS on Cisco 2960 and 3750 switch stacks using Spectrum, but the Firmware upload task only uploads the IOS image to the flash of the first flash.
Does anyone know how to do this? Kind regards Wiehann Kotze T-Systems SA (Pty) Ltd ICT Delivery Wiehann Kotze Network Support Specialist GAN Avanti Towers North Block, 4 Churchill Close, Bellville, 7530 P O BOX 603, Bellville, 7530 +27(21)974-3080 (Phone) +27(76)715-5982 (Mobile) Email: [email protected]<mailto:[email protected]> http://www.t-systems.co.za Registration Number: 1989/007547/07 Disclaimer: This message and/or attachment(s) may contain privileged, confidential and/or personal information. If you are not the intended recipient you may not disclose or distribute any of the information contained within this message. In such case you must destroy this message and inform the sender of the error. T-Systems does not accept liability for any errors, omissions, information and viruses contained in the transmission of this message. Any opinions, conclusions and other information contained within this message not related to T-Systems' official business is deemed to be that of the individual only and is not endorsed by T-Systems. This message and/or attachment(s) may contain privileged or confidential information. If you are not the intended recipient you may not disclose or distribute any of the information contained within this message. In such case you must destroy this message and inform the sender of the error. T-Systems does not accept liability for any errors, omissions, information and viruses contained in the transmission of this message. Any opinions, conclusions and other information contained within this message not related to T-Systems' official business is deemed to be that of the individual only and is not endorsed by T-Systems. T-Systems - Business Flexibility --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
