Hi All
We configured Spectrum many years ago, to display IF_Alias instead of the Interface name when an alarm appears. I have lost my notes on how I did it, so does anyone out there have an idea. It uses the standard Name tab in alarm panel? [cid:[email protected]] Kind regards Stephen Boshoff [T-Systems South Africa]<http://www.t-systems.co.za> Delivery Team Leader: ESM 1 The Crescent, Westway Office Park, Westville, Durban, 3629 +27(64)739-5877 (Phone) +27(60)981-5942 (Mobile) +27(86)642-3243 (Fax) Email: [email protected] Registration Number: 1989/007547/07 [#UNOUTSOURCE]<http://un-outsource.co.za> Disclaimer: This message and/or attachment(s) may contain privileged, confidential and/or personal information. If you are not the intended recipient you may not disclose or distribute any of the information contained within this message. In such case you must destroy this message and inform the sender of the error. T-Systems does not accept liability for any errors, omissions, information and viruses contained in the transmission of this message. Any opinions, conclusions and other information contained within this message not related to T-Systems' official business is deemed to be that of the individual only and is not endorsed by T-Systems. This message and/or attachment(s) may contain privileged or confidential information. If you are not the intended recipient you may not disclose or distribute any of the information contained within this message. In such case you must destroy this message and inform the sender of the error. T-Systems does not accept liability for any errors, omissions, information and viruses contained in the transmission of this message. Any opinions, conclusions and other information contained within this message not related to T-Systems' official business is deemed to be that of the individual only and is not endorsed by T-Systems. T-Systems - Business Flexibility --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
