> I am having a few problems. I am using pppoa2m, and the latest speedtouch for bsd. I am using the exact sample ppp.conf (edited for my vpi.vci and username/password) that came with the package. I execute the modem_run command, which runs fine. Then I execute 'ppp -background adsl'. It says that my PPP session has opened successfully. But, it never opens 'pppoa2'. When i do 'ps aux | grep pppoa2, it shows me taht pppoa2 is not running, which in turn is not letting me send/recieve data through my PPP connection. This just started happening all of a sudden. I tried recompiling pppoa2, and everything, and it is still not working. If I try to start pppoa2 manually it does not work either. This is an example of what is logged into pppoa2.log:
You can't launch pppoa2 manually, because it won't be able to link with ppp. If it say : PPP enable, then you must be connected ! > -- > I'm the parent process, I handle endpoint 0x07 > pty descriptors: fdin=3, fdout=4 > Increasing SNDBUF from 2048 to 65536 > Increasing RCVBUF from 4096 to 65536 > Im the children process, I handle endpoint 0x87 > -- > That is all that it shows each pppoa2 session, when it tries to start. There are no errors in ppp.log, it dials successfully, just pppoa2 does not start. The lines you put just before from pppoa2.log shows that pppoa2 was launched, and i don't see any mistake in them. Do you get an ip in ifconfig ? try to ping the computer you are connected to. Maybe your dns are bad .... For me, you seem to be connected. > Someone have ANY ideas on what could be going on? I need to get this box online by Saturday night :/ It should work in time :) -- Fran�ois Rogler. Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
