Par ou commencer,
Bonjour � tous,
euh, je m'excuse le message est un peu lon g mais le copier /coller de
parties de logs ca prend de la place.
Je suis assez neuneu sous linux.
Je voudrais dire que j'ai installer une mandrake 8.1 qui propose des
l'installation la mise en oeuvre du speedtouch.
C'est ce que j'ai fais mais l'installe m'a renvoyer en me demandant d'aller
chercher le fichier mgmt.o chez alcatel et de la copier dans un r�pertoire.
C'est ce que j'ai fais nient.
Alors j'ai fais une recherche sur le sujet j'ai t�l�charger les sources du
fameux drivers lit la doc et j'ai r�ussi � lancer mon modem et a me
conencter � l'inetrnet avec :
pppd call adsl.
Au pr�alable j'ai charger le module ohci en remplacant dans mon module.conf
qqch uhci par ohci, j'ai vu que ma carte pci/usb supportait cette norme.
J'ai copier le script adsl.sh dans /etc/rc.d/init .... pour le d�marrage
automaitque.
Je fait des peites modifs sur mes services avec linuxconf, je ne sais pas si
ca peut influer.
Je vais dormir.
Je me leve et je te bouscule ...
J'allume mon ordinateur marche plus ? ! !
Je ne sais plus ou regarder pour progresser, je garde espoir car je sais que
ca peut marcher je l'ai fais marcher je n'atais pas sous.
voila des extraits de quelque fichier :
cat de mon usb
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=e000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
ifconfig avant que ca plante :
ppp0 Lien encap:Protocole Point-�-Point
POINTOPOINT NOARP MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:3
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
bon apres ca plante
$>lsmod
Module Size Used by
es1371 26768 0 (autoclean)
ac97_codec 9312 0 (autoclean) [es1371]
gameport 1856 0 (autoclean) [es1371]
soundcore 4208 4 (autoclean) [es1371]
af_packet 12560 0 (autoclean)
usb-ohci 18880 0 (unused)
usbcore 50752 1 [usb-ohci]
ne2k-pci 5248 1 (autoclean)
8390 6432 0 (autoclean) [ne2k-pci]
ext3 63328 2 (autoclean)
jbd 39360 2 (autoclean) [ext3]
rtc 5600 0 (autoclean)
si je relance modem run :
Another program/driver is already accessing the modem...
cat de proc/pci :
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (rev
2).
....
Bus 0, device 7, function 2:
USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 1).
IRQ 10.
Master Capable. Latency=64.
I/O at 0xe000 [0xe01f].
pppd.txt (sais plus ce que c est), c'est peut etre var/log/ppp...
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
Hangup (SIGHUP)
Modem hangup
Connection terminated.
Failed to open /dev/pts/1: No such file or directory
Failed to open /dev/pts/1: No such file or directory
Failed to open /dev/pts/1: No such file or directory
Failed to open /dev/pts/1: No such file or directory
Failed to open /dev/pts/1: No such file or directory
Failed to open /dev/pts/1: No such file or directory
Failed to open /dev/pts/1: No such file or directory
Failed to open /dev/pts/1: No such file or directory
Failed to open /dev/pts/1: No such file or directory
pppoa2.log (je resume j ai mis les differents type de messages)
############################################################################
####
PPPoA2 version 15082001
Log started on Wed Feb 6 22:10:55 2002
* pid=2336 * : I'm the parent process, I handle the endpoint 0x07
* pid=2350 * : I'm the children process, I handle the endpoint 0x87
< pid=2336 > [Wed Feb 6 22:53:31 2002] Killed by a signal 15
############################################################################
####
PPPoA2 version 15082001
Log started on Thu Feb 7 02:48:19 2002
* pid=2157 * : I'm the parent process, I handle the endpoint 0x07
* pid=2161 * : I'm the children process, I handle the endpoint 0x87
< pid=2157 > [Thu Feb 7 02:48:20 2002] Error writing to usb
Reason: Invalid argument
############################################################################
####
et y en a pas mail des comme ce dernier ...................
############################################################################
####
PPPoA2 version 15082001 (ca veut dire que ca marchait ?????)
Log started on Thu Feb 7 02:51:17 2002
* pid=3748 * : I'm the parent process, I handle the endpoint 0x07
* pid=3764 * : I'm the children process, I handle the endpoint 0x87
############################################################################
####
PPPoA2 version 15082001
Log started on Thu Feb 7 02:51:17 2002
* pid=3762 * : I'm the parent process, I handle the endpoint 0x07
< pid=3762 > [Thu Feb 7 02:51:17 2002] pusb_claim_interface 1 failed
############################################################################
####
mon type de controller usb :
00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
(prog-if 00 [UHCI])
00:0b.0 USB Controller: OPTi Inc. 82C861 (rev 20) (prog-if 10 [OHCI])
00:0b.1 USB Controller: OPTi Inc. 82C861 (rev 20) (prog-if 10 [OHCI])
uname :
Linux www.tartanpion.com 2.4.8-26mdk #1 Sun Sep 23 17:06:39 CEST 2001 i686
unknown
ca, ca doit etre les infos du noyeau :
Feb 7 15:32:22 www pppd[6808]: pppd 2.4.1 started by root, uid 0
Feb 7 15:32:22 www pppd[6808]: using channel 256
Feb 7 15:32:22 www pppd[6808]: Using interface ppp0
Feb 7 15:32:22 www pppd[6808]: Connect: ppp0 <--> /dev/pts/4
Feb 7 15:32:22 www pppoa2m[6809]: Starting PPPoA2m ( merged version includes
new ATM/AAL5 stack ) 20011007
Feb 7 15:32:22 www pppoa2m[6809]: I'm the parent process, I handle the
endpoint 0x07
Feb 7 15:32:22 www pppoa2m[6809]: pusb_claim_interface 1 failed
Feb 7 15:32:22 www pppd[6808]: Script /usr/local/bin/pppoa2 -vpi 8 -vci 35
finished (pid 6809), status = 0xff00
Feb 7 15:32:22 www pppd[6808]: Modem hangup
Feb 7 15:32:22 www pppd[6808]: Connection terminated.
Feb 7 15:32:22 www pppd[6808]: using channel 257
Feb 7 15:32:22 www pppd[6808]: Using interface ppp0
Feb 7 15:32:22 www pppd[6808]: Connect: ppp0 <--> /dev/pts/4
Feb 7 15:32:22 www pppoa2m[6824]: Starting PPPoA2m ( merged version includes
new ATM/AAL5 stack ) 20011007
Feb 7 15:32:22 www pppoa2m[6824]: I'm the parent process, I handle the
endpoint 0x07
Feb 7 15:32:22 www pppoa2m[6824]: pusb_claim_interface 1 failed
Feb 7 15:32:22 www pppd[6808]: Script /usr/local/bin/pppoa2 -vpi 8 -vci 35
finished (pid 6824), status = 0xff00
(apart� lors du reboot je crois que mon systeme bloque sur le demontage des
interfaces ip, voila peut etre un
message qui prouve ca, comment corriger)
Feb 7 15:53:34 www named[1333]: loading configuration from '/etc/named.conf'
Feb 7 15:53:34 www named[1333]: no IPv6 interfaces found
Feb 7 15:53:46 www named[1333]: loading configuration from '/etc/named.conf'
Feb 7 15:53:46 www named[1333]: no IPv6 interfaces found
les erreurs du noyeau :
Feb 6 20:09:21 www kernel: Unknown bridge resource 2: assuming transparent
..... (plein de comme ca)
ca c est ce qui ce passe au boot :
....
Feb 7 14:45:37 www kernel: PCI: Found IRQ 10 for device 00:0c.0
Feb 7 14:45:37 www kernel: PCI: Sharing IRQ 10 with 00:07.2
Feb 7 14:45:37 www kernel: PCI: Sharing IRQ 10 with 00:0b.1
Feb 7 14:45:37 www kernel: usb.c: registered new driver usbdevfs
Feb 7 14:45:37 www kernel: usb.c: registered new driver hub
Feb 7 14:45:37 www kernel: PCI: Found IRQ 5 for device 00:0b.0
Feb 7 14:45:37 www kernel: usb-ohci.c: USB OHCI at membase 0xcac5c000, IRQ 5
Feb 7 14:45:37 www kernel: usb-ohci.c: usb-00:0b.0, OPTi Inc. 82C861
Feb 7 14:45:37 www kernel: usb.c: new USB bus registered, assigned bus
number 1
Feb 7 14:45:37 www kernel: hub.c: USB hub found
Feb 7 14:45:37 www kernel: hub.c: 2 ports detected
Feb 7 14:45:37 www kernel: PCI: Found IRQ 10 for device 00:0b.1
Feb 7 14:45:37 www kernel: PCI: Sharing IRQ 10 with 00:07.2
Feb 7 14:45:37 www kernel: PCI: Sharing IRQ 10 with 00:0c.0
Feb 7 14:45:37 www kernel: usb-ohci.c: USB OHCI at membase 0xcac5e000, IRQ
10
Feb 7 14:45:37 www kernel: usb-ohci.c: usb-00:0b.1, OPTi Inc. 82C861 (#2)
Feb 7 14:45:37 www kernel: usb.c: new USB bus registered, assigned bus
number 2
Feb 7 14:45:37 www kernel: hub.c: USB hub found
Feb 7 14:45:37 www kernel: hub.c: 2 ports detected
Feb 7 14:45:37 www kernel: hub.c: USB new device connect on bus1/1, assigned
device number 2
Feb 7 14:46:44 www kernel: es1371: version v0.30 time 17:26:53 Sep 23 2001
Feb 7 14:46:44 www kernel: PCI: Found IRQ 12 for device 00:0a.0
Feb 7 14:46:44 www kernel: es1371: found chip, vendor id 0x1274 device id
0x1371 revision 0x08
Feb 7 14:46:44 www kernel: es1371: found es1371 rev 8 at io 0xe400 irq 12
Feb 7 14:46:44 www kernel: es1371: features: joystick 0x0
Feb 7 14:46:44 www kernel: ac97_codec: AC97 codec, id: 0x5452:0x4123
(TriTech TR?????)
Feb 7 14:47:09 www kernel: CSLIP: code copyright 1989 Regents of the
University of California
Feb 7 14:47:09 www kernel: PPP generic driver version 2.4.1
Feb 7 14:47:09 www kernel: N_HDLC line discipline registered.
la je rentre dans le runlevel 5 ...
je crois qu on voit les 2cas quand ca marche et marche pas
Feb 6 21:25:57 www init: Entering runlevel: 5
Feb 6 22:06:55 www pppd[2166]: pppd 2.4.1 started by root, uid 0
Feb 6 22:06:55 www pppd[2166]: Using interface ppp0
Feb 6 22:06:55 www pppd[2166]: Connect: ppp0 <--> /dev/pts/3
Feb 6 22:07:25 www pppd[2166]: Connection terminated.
Feb 6 22:07:25 www pppd[2166]: Using interface ppp0
Feb 6 22:07:25 www pppd[2166]: Connect: ppp0 <--> /dev/pts/3
Feb 6 22:07:49 www pppd[2166]: Modem hangup
Feb 6 22:07:49 www pppd[2166]: Connection terminated.
Feb 6 22:07:49 www pppd[2166]: Hangup (SIGHUP)
Feb 6 22:07:49 www pppd[2166]: Exit.
Feb 6 22:07:55 www pppd[2218]: pppd 2.4.1 started by root, uid 0
Feb 6 22:07:55 www pppd[2218]: Using interface ppp0
Feb 6 22:07:55 www pppd[2218]: Connect: ppp0 <--> /dev/pts/3
Feb 6 22:07:56 www pppd[2218]: Modem hangup
Feb 6 22:07:56 www pppd[2218]: Connection terminated.
Feb 6 22:07:56 www pppd[2218]: Using interface ppp0
Feb 6 22:07:56 www pppd[2218]: Connect: ppp0 <--> /dev/pts/3
Feb 6 22:07:56 www pppd[2218]: Modem hangup
Feb 6 22:07:56 www pppd[2218]: Connection terminated.
Feb 6 22:07:57 www pppd[2218]: Exit.
Feb 6 22:10:55 www pppd[2335]: pppd 2.4.1 started by root, uid 0
Feb 6 22:10:55 www pppd[2335]: Using interface ppp0
Feb 6 22:10:55 www pppd[2335]: Connect: ppp0 <--> /dev/pts/3
Feb 6 22:10:58 www pppd[2335]: local IP address 212.43.xxx.xxx
Feb 6 22:10:58 www pppd[2335]: remote IP address 212.43.xxx.xxx
Feb 6 22:10:58 www pppd[2335]: primary DNS address 212.43.xxx.xxx
Feb 6 22:10:58 www pppd[2335]: secondary DNS address 212.43.xxx.xxx
Feb 6 22:54:57 www devfsd[106]: Caught SIGHUP <30>Feb 6 22:54:57
devfsd[106]: read config file: "/etc/devfsd.conf"
Feb 6 22:55:09 www init: Entering runlevel: 5
Feb 7 01:27:17 www devfsd[106]: Caught SIGHUP <30>Feb 7 01:27:17
devfsd[106]: read config file: "/etc/devfsd.conf"
Feb 7 01:27:29 www init: Entering runlevel: 5
Feb 7 01:47:44 www pppd[2126]: pppd 2.4.1 started by root, uid 0
Au fait j'ai lu qu il etait pr�f�reable de recomplier sons noyeau pour
supporter le persist
des connexions.
Comment recompiler ?
D'ailleurs j'ai pas beaucoup de connaissance sur le noyeau comment y ajouter
des modules de maniere permanente .... Je ne sais pas si la bidouille dans
modules.conf que j'ai faite est r�glo ?
Merci pour tt vos conseils.
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
