j'utilise 1 noyau 2.4.19-pre1 depuis 1 semaine a peu pres sans aucun probleme. (drivers speedtouch 1.0)
++ David ----- Original Message ----- From: "Sami Dalouche" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, March 06, 2002 10:46 PM Subject: [speedtouch] Problemes de deconnections Bonjour, Je viens d'installer un kernel 2.4.19-pre2 (ou 2.4.18, le resultat est le meme) avec la version 1.0 du driver de benoit, et j'ai des problemes de deconnections. Fréquemment (toutes les 15 minutes, voire moins, ou plus suivant l'utilisation de la bande passante..), le modem se deconnecte et affiche dans les logs : Mar 6 22:24:05 pingoo pppd[2313]: No response to 4 echo-requests Mar 6 22:24:05 pingoo pppd[2313]: Serial link appears to be disconnected. Mar 6 22:24:11 pingoo pppd[2313]: Connection terminated. Mar 6 22:24:11 pingoo pppd[2313]: Connect time 19.1 minutes. Mar 6 22:24:11 pingoo pppd[2313]: Sent 10080215 bytes, received 11829040 bytes. Mar 6 22:24:12 pingoo pppd[2313]: Using interface ppp0 Mar 6 22:24:12 pingoo pppd[2313]: Connect: ppp0 <--> /dev/pts/12 Mar 6 22:24:16 pingoo /etc/hotplug/net.agent: invoke ifdown ppp0 Mar 6 22:24:16 pingoo /etc/hotplug/net.agent: assuming ppp0 is already up Mar 6 22:24:18 pingoo pppd[2313]: Remote message: CHAP authentication success, unit 608 Mar 6 22:24:18 pingoo pppd[2313]: local IP address 217.128.244.164 Mar 6 22:24:18 pingoo pppd[2313]: remote IP address 217.128.244.1 Parfois, il se passé quelque chose d'encore plus bizarre : Mar 6 22:27:45 pingoo kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 1 696 ret -110 Mar 6 22:27:45 pingoo last message repeated 2 times Mar 6 22:27:45 pingoo kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 1 06 ret -110 Mar 6 22:27:45 pingoo last message repeated 3 times Mar 6 22:27:45 pingoo kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 1 696 ret -110 Mar 6 22:27:45 pingoo kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 1 696 ret -110 Mar 6 22:27:45 pingoo kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 1 06 ret -110 Mar 6 22:27:45 pingoo last message repeated 4 times Mar 6 22:27:45 pingoo kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 1 060 ret -110 Mar 6 22:27:45 pingoo kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 1 696 ret -110 [...] Mar 6 22:27:45 pingoo last message repeated 5 times Mar 6 22:27:45 pingoo kernel: usb.c: USB disconnect on device 2 Mar 6 22:27:45 pingoo kernel: usbdevfs: process 6173 (pppoa3) did not claim int erface 1 before use [.] Mar 6 22:27:45 pingoo kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 1 06 ret -110 Mar 6 22:27:45 pingoo kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 1 696 ret -110 Mar 6 22:27:45 pingoo kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 1 696 ret -110 Mar 6 22:27:45 pingoo kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 3 71 ret -110 Mar 6 22:27:45 pingoo kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 1 06 ret -110 Mar 6 22:27:45 pingoo kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 1 06 ret -110 Mar 6 22:27:45 pingoo pppd[2313]: Modem hangup Mar 6 22:27:45 pingoo pppd[2313]: Connection terminated. Mar 6 22:27:45 pingoo pppd[2313]: Connect time 3.6 minutes. Mar 6 22:27:45 pingoo pppd[2313]: Sent 1858510 bytes, received 2223344 bytes. Mar 6 22:27:46 pingoo pppd[2313]: Using interface ppp0 Mar 6 22:27:46 pingoo pppd[2313]: Connect: ppp0 <--> /dev/pts/11 Mar 6 22:27:46 pingoo pppd[2313]: Modem hangup Mar 6 22:27:46 pingoo pppd[2313]: Connection terminated. Mar 6 22:27:46 pingoo /sbin/hotplug: arguments (usb) env (PWD=/etc/hotplug DEVI CE=/proc/bus/usb/001/002 ACTION=remove DEBUG=kernel OLDPWD=/ DEVFS=/proc/bus/usb TYPE=255/0/0 SHLVL=1 HOME=/ PATH=/bin:/sbin:/usr/sbin:/usr/bin PRODUCT=6b9/4061 /0 _=/usr/bin/env) Mar 6 22:27:46 pingoo /sbin/hotplug: invoke /etc/hotplug/usb.agent () Mar 6 22:27:46 pingoo /etc/hotplug/net.agent: invoke ifdown ppp0 Mar 6 22:27:46 pingoo pppd[2313]: Using interface ppp0 Mar 6 22:27:46 pingoo pppd[2313]: Connect: ppp0 <--> /dev/pts/11 Mar 6 22:27:46 pingoo /etc/hotplug/net.agent: assuming ppp0 is already up Mar 6 22:27:46 pingoo kernel: hub.c: USB new device connect on bus1/2, assigned device number 3 Mar 6 22:27:46 pingoo kernel: Manufacturer: ALCATEL Mar 6 22:27:46 pingoo kernel: Product: Speed Touch USB Mar 6 22:27:47 pingoo kernel: SerialNumber: 0090D0268969 Mar 6 22:27:47 pingoo kernel: usb.c: USB device 3 (vend/prod 0x6b9/0x4061) is n ot claimed by any active driver. Mar 6 22:27:47 pingoo kernel: Length = 18 Mar 6 22:27:47 pingoo kernel: Length = 18 Mar 6 22:27:47 pingoo kernel: DescriptorType = 01 Mar 6 22:27:47 pingoo kernel: USB version = 1.10 Mar 6 22:27:47 pingoo kernel: Vendor:Product = 06b9:4061 Mar 6 22:27:47 pingoo kernel: MaxPacketSize0 = 8 Mar 6 22:27:47 pingoo kernel: NumConfigurations = 1 Mar 6 22:27:47 pingoo kernel: Device version = 0.00 Mar 6 22:27:47 pingoo kernel: Device Class:SubClass:Protocol = ff:00:00 Mar 6 22:27:47 pingoo kernel: Vendor class [.] Mar 6 22:27:47 pingoo /sbin/hotplug: arguments (usb) env (PWD=/etc/hotplug DEVI CE=/proc/bus/usb/001/003 ACTION=add DEBUG=kernel OLDPWD=/ DEVFS=/proc/bus/usb TY PE=255/0/0 SHLVL=1 HOME=/ PATH=/bin:/sbin:/usr/sbin:/usr/bin PRODUCT=6b9/4061/0 _=/usr/bin/env) Mar 6 22:27:47 pingoo /sbin/hotplug: invoke /etc/hotplug/usb.agent () Mar 6 22:27:47 pingoo /etc/hotplug/net.agent: assuming ppp0 is already up Mar 6 22:27:47 pingoo /etc/hotplug/net.agent: invoke ifdown ppp0 Mar 6 22:27:48 pingoo /etc/hotplug/usb.agent: ... no modules for USB product 6b 9/4061/0 Enfin, certaines déconnections se traduisent par : Mar 3 01:52:11 pingoo pppd[529]: LCP: timeout sending Config-Requests Mar 3 01:52:11 pingoo pppd[529]: Connection terminated. Mar 3 01:52:11 pingoo pppd[529]: Using interface ppp0 Mar 3 01:52:11 pingoo pppd[529]: Connect: ppp0 <--> /dev/pts/0 Je signale cependant qu'avec le meme materiel, je faisais tourner des drivers de benoit assez vieux (genre début 2001, quelque chose comme cela) sur un kernel 2.4.7 ou 2.4.8, quelque chose comme cela, et ca fonctionnait. Je suis maintenant passé à une Debian testing, avec un noyau 2.4.18 / 2.4.19-pre2 et les derniers drivers de papillault et voila toutes les erreurs que j'obtiens. Quelqu'un saurait-il d'où cela peut venir ? Merci Sam Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
