Ahem...
Problem solved. Incorrectly configured speedtouch.conf file which wasn't loading the usb-ohci module. Just for reference in case anyone has a similar problem. Mark -------Original Message------- From: [EMAIL PROTECTED] Date: Friday, June 07, 2002 10:30:07 To: Speedtouch Mailing list Subject: [speedtouch] "Sorry I didn't find your ADSL modem"... Help please Whilst I can get my modem to work, I do not seem to be able to use the speedtouch startup script... Background: Using the instructions in the SpeedTouchUSB-HOWTO I am able to initialise the modem and connect without any problems. However when I try to run the speedtouch script at startup it fails and I receive the messages: "Sorry, I couldn't find your ADSL modem. Please check /proc/ ...etc... " (In dmesg) " usb.c: USB device 2 (vend/prod 0x6b9/0x4061) is not claimed by any active driver usb.c: usb_control/bulk_msg: timeout usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x85 len 512 ret -110 " I've followed the instructions in the How-to. I'm running Redhat Linux 7.2 with a 2.4.18 kernel. I've compiled ppp_generic, ppp_snctty and usbcore into the kernel with n_hdlc and usb-ohci as modules. In addition I have appended the following line to my /etc/fstab file: none /proc/bus/usb usbdevfs defaults 0 0 I've also installed hotplug support, however I guess the problem is coldplugging". I've searched but not found anything that helps me out. Can someone please put me out of my misery? ;) Would appreciate suggestions/advice. Many thanks Mark Jennison Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED] fr?subject=unsubscribe . Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
