hello all,
i've been trying to get my alcatel modem to work on my freebsd 4.5 box for some time now. because i'm writing to this list i guess you figured out that i can't get it to work. pppoa2 and modem_run have been installed and set to work on startup. however, it doesn't get to the step where it invokes pppoa2, as you can see in the logs (i've included them below). my pppoa2.log is empty as well. if anyone has any idea why, i'd appreciate your response. thanks everyone! mike here's my ppp.log from my machine starting up: ___________________________________________ Jun 12 14:23:02 athome ppp[107]: Phase: Using interface: tun0 Jun 12 14:23:02 athome ppp[107]: Phase: deflink: Created in closed state Jun 12 14:23:02 athome ppp[107]: tun0: Command: adsl: set authname [EMAIL PROTECTED] Jun 12 14:23:02 athome ppp[107]: tun0: Command: adsl: set authkey ******** Jun 12 14:23:02 athome ppp[107]: tun0: Command: adsl: set device !pppoa2 -vpi 8 -vci 35 -v 1 Jun 12 14:23:02 athome ppp[107]: tun0: Command: adsl: accept chap Jun 12 14:23:02 athome ppp[107]: tun0: Command: adsl: set speed sync Jun 12 14:23:02 athome ppp[107]: tun0: Command: adsl: set timeout 0 Jun 12 14:23:02 athome ppp[107]: tun0: Command: adsl: enable lqr Jun 12 14:23:02 athome ppp[107]: tun0: Command: adsl: set lqrperiod 5 Jun 12 14:23:02 athome ppp[107]: tun0: Command: adsl: set redial 15 10000 Jun 12 14:23:02 athome ppp[107]: tun0: Command: adsl: set dial Jun 12 14:23:02 athome ppp[107]: tun0: Command: adsl: set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 Jun 12 14:23:02 athome ppp[107]: tun0: Command: adsl: add default HISADDR Jun 12 14:23:02 athome ppp[107]: tun0: Command: adsl: enable dns Jun 12 14:23:02 athome ppp[108]: tun0: Phase: PPP Started (background mode). Jun 12 14:23:02 athome ppp[108]: tun0: Phase: bundle: Establish Jun 12 14:23:02 athome ppp[108]: tun0: Phase: deflink: closed -> opening Jun 12 14:23:02 athome ppp[108]: tun0: Phase: deflink: Connected! Jun 12 14:23:02 athome ppp[108]: tun0: Phase: deflink: opening -> dial Jun 12 14:23:02 athome ppp[108]: tun0: Chat: deflink: Dial attempt 1 of 10000 Jun 12 14:23:02 athome ppp[108]: tun0: Phase: deflink: dial -> carrier Jun 12 14:23:02 athome ppp[108]: tun0: Phase: deflink: carrier -> login Jun 12 14:23:02 athome ppp[108]: tun0: Phase: deflink: login -> lcp Jun 12 14:23:18 athome ppp[108]: tun0: Phase: deflink: Disconnected! Jun 12 14:23:18 athome ppp[108]: tun0: Phase: deflink: lcp -> logout Jun 12 14:23:18 athome ppp[108]: tun0: Phase: deflink: logout -> hangup Jun 12 14:23:18 athome ppp[108]: tun0: Phase: deflink: Disconnected! Jun 12 14:23:18 athome ppp[108]: tun0: Phase: deflink: Connect time: 16 secs: 0 octets in, 130 octets out Jun 12 14:23:18 athome ppp[108]: tun0: Phase: deflink: : 0 packets in, 5 packets out Jun 12 14:23:18 athome ppp[108]: tun0: Phase: total 8 bytes/sec, peak 10 bytes/sec on Wed Jun 12 14:23:18 2002 Jun 12 14:23:18 athome ppp[108]: tun0: Phase: deflink: HUPing 110 Jun 12 14:23:18 athome ppp[108]: tun0: Phase: deflink: hangup -> closed Jun 12 14:23:18 athome ppp[108]: tun0: Phase: bundle: Dead Jun 12 14:23:18 athome ppp[108]: tun0: Phase: PPP Terminated (normal). Jun 12 14:23:18 athome ppp[107]: tun0: Phase: Parent: Child failed (errdead) Jun 12 14:23:18 athome ppp[108]: tun0: Chat: Parent notified of failure ___________________________________________ here's my ppp.conf file ___________________________________________ default: ident user-ppp VERSION (built COMPILATIONDATE) set log Phase Chat IPCP CCP tun command adsl: set authname [EMAIL PROTECTED] set authkey ***** set device !"pppoa2 -vpi 8 -vci 35 -v 1" accept chap set speed sync set timeout 0 enable lqr set lqrperiod 5 set redial 15 10000 set dial "" set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 add default HISADDR enable dns ___________________________________________ Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
