Hi, I'm having problems loading the microcode into my ALE070 USB ADSL modem. I'm using RH 7.2, kernel 2.4.18 with usb support as specified by the howto. Here's the contents of /proc/bus/usb/devices:
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=e000 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1 P: Vendor=1690 ProdID=0206 Rev= 1.00 S: Manufacturer=GlobeSpan Inc. S: Product=USB-ADSL Modem S: SerialNumber=247E3A C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl= 3ms I: If#= 0 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=88(I) Atr=01(Isoc) MxPS=1003 Ivl= 1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl= 3ms I: If#= 0 Alt= 2 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=88(I) Atr=01(Isoc) MxPS= 912 Ivl= 1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl= 3ms I: If#= 0 Alt= 3 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=88(I) Atr=01(Isoc) MxPS= 736 Ivl= 1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl= 3ms I: If#= 0 Alt= 4 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=88(I) Atr=01(Isoc) MxPS= 448 Ivl= 1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl= 3ms I: If#= 0 Alt= 5 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=88(I) Atr=01(Isoc) MxPS= 240 Ivl= 1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl= 3ms As you can see, the vendor and product ID are different from those specified for Alcatel in the modem_run sources. I changed it and when I'm running modem_run I get: modem_run[1370]: Found ALCATEL SpeedTouch USB modem modem_run[1370]: Another program/driver is already accessing the modem... I see that ioctl is failing in pusb_claim_interface, it returns 0 for interface 0, and -1 for interface 1. I'de appreciate any help you might offer. Please CC me because I'm not on the list. Thank you. -- ***************************************** Etay Meiri [EMAIL PROTECTED] ***************************************** Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
