At 13:19 13/03/2003 +0100, you wrote: >It may not be of any help but my CRC errors stopped as soon as I switched >from onboard USB of my GA-7VAX mother board VIA chipset to a USB PCI card >with the OPTi chipset.
Hi, Sorry if this is slightly off topic... I'm trying to do just this, but my motherboard's built in USB is uhci, while the card I'm trying to use if ohci, and although the controller is detected at startup (log below), nothing happens when I plug the modem into the PCI card usb slots. Thoughts I've had: * If I had a proper motherboard I could disable the on-board USB controller, but my bios is too old and does not support this. * If I re-compile the kernel without uhci support maybe? * Maybe I can tell usbd to only monitor ohci0 ? Has anyone got any idea? Mar 12 18:37:31 moonchild /kernel: uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1400-0x141f irq 9 at device 7.2 on pci0 Mar 12 18:37:31 moonchild /kernel: usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 Mar 12 18:37:31 moonchild /kernel: usb0: USB revision 1.0 Mar 12 18:37:31 moonchild /kernel: uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 Mar 12 18:37:31 moonchild /kernel: uhub0: 2 ports with 2 removable, self powered .... Mar 12 18:37:31 moonchild /kernel: ohci0: <CMD Tech 673 (USB0673) USB controller> mem 0xf4000000-0xf4000fff irq 10 at device 15.0 on pci0 Mar 12 18:37:31 moonchild /kernel: usb1: OHCI version 1.0, legacy support Mar 12 18:37:31 moonchild /kernel: usb1: <CMD Tech 673 (USB0673) USB controller> on ohci0 Mar 12 18:37:32 moonchild /kernel: usb1: USB revision 1.0 Mar 12 18:37:32 moonchild /kernel: uhub1: CMDTECH OHCI root hub, class 9/0, rev1.00/1.00, addr 1 Mar 12 18:37:32 moonchild /kernel: uhub1: 2 ports with 2 removable, self powered Cheers! -0 Gunnar >Ed > > > > -----Oorspronkelijk bericht----- > > Van: nsc [mailto:[EMAIL PROTECTED] > > Verzonden: donderdag 13 maart 2003 12:07 > > Aan: [EMAIL PROTECTED] > > Onderwerp: [speedtouch] Re: [PATCH] Skipping junk bytes > > > > > > > > > > "Ok Overbeek (mz)" wrote: > > > > > Tried the patches, but alas without any > > improvement..............still > > > getting regular CRC-errors.................. > > > > > > > did you try the 'undocumented' -b option into modem_run ? I > > repeat, this, and the atm.c patch cured it for me. > > > > (that'll teach me for messing with the code at the top of the > > file to find out it is in fact an option at the bottom of the > > code :-/) > > > > regards, > > > > Nathan > > > > > > > > Liste de diffusion modem ALCATEL SpeedTouch USB > > Pour se désinscrire : > > mailto:[EMAIL PROTECTED] > > > > > > > >Disclaimer >************************************************************************ >Aan dit bericht kunnen geen rechten worden ontleend. >Dit bericht is uitsluitend bestemd voor de geadresseerde. >Als u dit bericht per abuis hebt ontvangen, wordt u verzocht het te >vernietigen en de afzender te informeren. >Wij adviseren u om bij twijfel over de juistheid of de volledigheid van >de mail contact met afzender op te nemen. >************************************************************************ > > > >Liste de diffusion modem ALCATEL SpeedTouch USB >Pour se désinscrire : mailto:[EMAIL PROTECTED] > > -- Gunnar AAstrand Grimnes [EMAIL PROTECTED] http://www.csd.abdn.ac.uk/~ggrimnes 7 John Knox Court Mounthooly Aberdeen AB24 3LF Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
