I use modem_run with the -s option, but that�s only relevant when you're first loading the firmware into it. If it were that causing the error, the 'len' part of the debug output would have been 512, not 106. That error happens after then modem has been online for a few hours ...
-----Original Message----- From: Daedelus [mailto:[EMAIL PROTECTED] Sent: 02 August 2003 03:11 To: [EMAIL PROTECTED] Subject: RE : [speedtouch] Problem with speedtouch / usb Try to run modem_run with -s option -----Message d'origine----- De�: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] De la part de kieran fulke Envoy�: vendredi 1 ao�t 2003 19:55 ��: [EMAIL PROTECTED] Objet�: [speedtouch] Problem with speedtouch / usb hello folks, I'm trying to use a speedtouch usb (original type) with linux, and its working fine, for perhaps 6 or 7 hours, then Something Goes Wrong, and messages fills up with this: usb_control/bulk_msg: timeout usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 106 ret -110 Both lights on the modem remain green, and the system isnt going into any sleep mode. Unplugging the modem, and rerunning modem_run, pppoa3 is needed to bring the connection back up. I'm using speedtouch-1.0 under debian/sid regards Liste de diffusion modem ALCATEL SpeedTouch USB Pour se dsinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]
